PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access

Topic Modeling and Simulation in Engineering

 

Simulations of the ground pressure exerted by demining rollers with rigid wheels
Dariusz Kalinko, Marian Łopatka, Arkadiusz Rubiec, Piotr Krogul
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

A Novel Simple Technique for Measuring the Volumetric Flow Rate and Direction of Flow Inside a Pipe – The Single and Double Coils Sensors
Asem Mohammad AL Jarrah
Adv. Sci. Technol. Res. J. 2022; 16(5):290-298
DOI: https://doi.org/10.12913/22998624/155038
 

The Applications of Graph Algorithms to Modeling of Integrated Urban Water Management System
Ewa Łazuka, Anna Futa, Magdalena Jastrzębska, Grzegorz Łagód, Bartosz Szeląg, Francesco Fatone
Adv. Sci. Technol. Res. J. 2022; 16(5):277-289
DOI: https://doi.org/10.12913/22998624/155037
 

Industrial Application of Deep Neural Network for Aluminum Casting Defect Detection in Case of Unbalanced Dataset
Michał Awtoniuk, Dariusz Majerek, Artur Myziak, Cyprian Gajda
Adv. Sci. Technol. Res. J. 2022; 16(5):120-128
DOI: https://doi.org/10.12913/22998624/154963
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

Impact of T-Splitter on the Laminar Flow Field Around Cylinder Pier
Rafi Mohammed Qasim, Safaa Hameed Faisal, Tahseen Ali Jabbar
Adv. Sci. Technol. Res. J. 2022; 16(5):202-215
DOI: https://doi.org/10.12913/22998624/154795
 

An Elastic-Plastic Analysis of Polycrystalline Structure Using Crystal Plasticity Modelling – Theory and Benchmark Tests
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2022; 16(5):163-177
DOI: https://doi.org/10.12913/22998624/154025
 

Experimental Research on the Influence of the Composition of the Fuel Mixture on the Operating Parameters of a Single-Cylinder Common Rail Diesel Engine
Karol Tucki, Remigiusz Mruk
Adv. Sci. Technol. Res. J. 2022; 16(5):100-109
DOI: https://doi.org/10.12913/22998624/153965
 

Construction and Verification for Metrological Properties of the Prototype Magnetic Head for Nondestructive Testing of Lift Guide Rail Wear under Test Conditions
Tomasz Krakowski, Hubert Ruta, Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2022; 16(5):28-39
DOI: https://doi.org/10.12913/22998624/153045
 

Solar Heating for Pit Thermal Energy Storage – Comparison of Solar Thermal and Photovoltaic Systems in TRNSYS 18
Klaudia Słomczyńska, Paweł Mirek, Marcin Panowski
Adv. Sci. Technol. Res. J. 2022; 16(5):40-51
DOI: https://doi.org/10.12913/22998624/153015
 

Calibration of Selected Bulk Biomaterials Parameters for DEM Simulation of Comminution Process. Case Study: Corn and Rice Grains
Weronika Kruszelnicka, Jan Diviš, Jakub Hlosta, Łukasz Adam Gierz, David Žurovec
Adv. Sci. Technol. Res. J. 2022; 16(5):64-77
DOI: https://doi.org/10.12913/22998624/152990
 

Demonstrator of a Digital Twin for Education and Training Purposes as a Web Application
Stanislaw Flaga, Kacper Pacholczak
Adv. Sci. Technol. Res. J. 2022; 16(5):110-119
DOI: https://doi.org/10.12913/22998624/152927
 

Suppressing of Co-Extracted Electrons in a Negative Ion Source-Numerical Simulation
Marcin Turek, Paweł Węgierek
Adv. Sci. Technol. Res. J. 2022; 16(5):1-10
DOI: https://doi.org/10.12913/22998624/152821
 

Modeling of a Primary Air Distribution in a Plenum Chamber of the 700 MWth Circulating Fluidized Bed Boiler
Paweł Mirek
Adv. Sci. Technol. Res. J. 2022; 16(5):86-99
DOI: https://doi.org/10.12913/22998624/152673
 

A Lean Robotics Approach to the Scheduling of Robotic Adhesive Dispensing Process
Łukasz Sobaszek
Adv. Sci. Technol. Res. J. 2022; 16(5):136-146
DOI: https://doi.org/10.12913/22998624/152332
 

On the Bahadur Representation of Quantiles for a Sample from ρ*-Mixing Structure Population
Dagmara Dudek, Anna Kuczmaszewska
Adv. Sci. Technol. Res. J. 2022; 16(3):316-330
DOI: https://doi.org/10.12913/22998624/150480
 

Static Analysis of Selected Design Solutions for Weight-Reduced Gears
Tomasz Dziubek, Bartłomiej Sobolewski, Grzegorz Budzik, Małgorzata Ewa Gontarz
Adv. Sci. Technol. Res. J. 2022; 16(3):258-268
DOI: https://doi.org/10.12913/22998624/150254
 

Impact of Using an Inerter on the Performance of Vehicle Active Suspension
Nabeel Taiseer Alshabatat, Tamir Shaqarin
Adv. Sci. Technol. Res. J. 2022; 16(3):331-339
DOI: https://doi.org/10.12913/22998624/150566
 

Study of Cross Wedge Rolling Process of BA3002-Type Railway Axle
Zbigniew Pater
Adv. Sci. Technol. Res. J. 2022; 16(2):225-231
DOI: https://doi.org/10.12913/22998624/147310
 

Numerical Simulation of the Airport Evacuation Process under Fire Conditions
Michał Jasztal, Łukasz Omen, Maciej Kowalski, Waldemar Jaskółowski
Adv. Sci. Technol. Res. J. 2022; 16(2):249-261
DOI: https://doi.org/10.12913/22998624/147280
 

The Influence of Composite Lay-Up and the Shape of the Closed Section on the Stability of the Structure
Błażej Czajka, Patryk Różyło
Adv. Sci. Technol. Res. J. 2022; 16(2):216-224
DOI: https://doi.org/10.12913/22998624/147129
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131-140
DOI: https://doi.org/10.12913/22998624/146765
 

Experimental Study of Failure Analysis in Notched and Repaired Fiberglass Epoxy Composite
Omar Hashim Hassoon, Abass Enzi, Lujain H. Kashkool
Adv. Sci. Technol. Res. J. 2022; 16(2):99-108
DOI: https://doi.org/10.12913/22998624/145309
 

Influence of the Linear Interpolation Segment on the Accuracy of Tool’s Outline Characterized by Variable Curvature
Artur Bełzo, Leszek Skoczylas, Roman Wdowik
Adv. Sci. Technol. Res. J. 2022; 16(1):316-324
DOI: https://doi.org/10.12913/22998624/144645
 

Mathematical Modeling of Stress in Circuit Cards Represented by Mechanical Oscillatory Systems
Igor Kovtun, Andrii Goroshko, Svitlana Petrashchuk
Adv. Sci. Technol. Res. J. 2022; 16(1):303-315
DOI: https://doi.org/10.12913/22998624/144574
 

The Influence of Composite Lay-Up on the Stability of a Structure with Closed Section
Patryk Różyło, Hubert Dębski
Adv. Sci. Technol. Res. J. 2022; 16(1):260-265
DOI: https://doi.org/10.12913/22998624/145156
 

The Method of Transferring Topology Optimization Results Directly to the CAD System Database
Konrad Łyduch, Jacek Łukaszyk, Michał Nowak
Adv. Sci. Technol. Res. J. 2022; 16(1):243-252
DOI: https://doi.org/10.12913/22998624/144853
 

Comparative Analysis of the Production Process of a Flange-Type Product by the Hybrid and Traditional Method with the Use of Simulation Methods
Agnieszka Wanda Terelak-Tymczyna, Emilia Bachtiak-Radka, Andrzej Jardzioch
Adv. Sci. Technol. Res. J. 2022; 16(1):231-242
DOI: https://doi.org/10.12913/22998624/144309
 

Path Interval and Its Relevance to Cutting Force in Ball and Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2022; 16(1):85-94
DOI: https://doi.org/10.12913/22998624/143051
 

Research of the Tool Velocity and Product Shape Aspects of the Hot Radial Rolling of C45 Steel Rings
Piotr Surdacki, Andrzej Gontarz, Grzegorz Winiarski, Grzegorz Samołyk
Adv. Sci. Technol. Res. J. 2021; 15(4):352-363
DOI: https://doi.org/10.12913/22998624/143269
 

Analysis of Mechanical Traces Left Probably by Ball Lightning
Wieslaw Z. Polak
Adv. Sci. Technol. Res. J. 2021; 15(4):182-191
DOI: https://doi.org/10.12913/22998624/142976
 

Response Time Estimation in Robotics Using Hierarchical Performance Modeling Approach
Ahmed Alsheikhy, Muhannad Almutiry
Adv. Sci. Technol. Res. J. 2021; 15(4):14-20
DOI: https://doi.org/10.12913/22998624/142655
 

Experimental and Numerical Analysis of Post-Critical States and Damage of Thin-Walled Channel Section Columns Made of Carbon/Epoxy Composite
Hubert Dębski, Jarosław Bieniaś
Adv. Sci. Technol. Res. J. 2021; 15(4):321-331
DOI: https://doi.org/10.12913/22998624/142603
 

Analysing the Effect of Forced Shifting Towards E- Learning during Covid-19 for Student Perceived Satisfaction Variables and Service Quality Dimensions
Asma Zaheer, Moteb Ayesh Albugami
Adv. Sci. Technol. Res. J. 2021; 15(4):174-181
DOI: https://doi.org/10.12913/22998624/142241
 

Sensitivity Analysis for Influence Parameters of Rail Corrugation Characteristics in Metro Straight Section
Zhiqiang Wang, Zhenyu Lei
Adv. Sci. Technol. Res. J. 2021; 15(4):110-117
DOI: https://doi.org/10.12913/22998624/142034
 

Working Fluid Selection for Simple and Recuperative Organic Rankine Cycle Operating Under Varying Conditions: A Comparative Analysis
Dodeye Igbong, Oku Ekpenyong Nyong, James Enyia, Ambrose Agba
Adv. Sci. Technol. Res. J. 2021; 15(4):202-221
DOI: https://doi.org/10.12913/22998624/142013
 

Simulation of the Griffith's Crack Using Own Method of Predicting the Crack Propagation
Jerzy Podgórski, Jakub Gontarz
Adv. Sci. Technol. Res. J. 2021; 15(4):1-13
DOI: https://doi.org/10.12913/22998624/141908
 

Selection of the Friction Model for Numerical Analyses of the Impact of Longitudinal Vibration on Stick-Slip Movement
Marta Rybkiewicz, Mariusz Leus
Adv. Sci. Technol. Res. J. 2021; 15(3):277-287
DOI: https://doi.org/10.12913/22998624/141184
 

Numerical and Experimental Investigation of the Influence of External Wall Moisture on Building Temperature Distributions
Arkadiusz Urzędowski, Jacek Zaburko, Piotr Gleń, Grzegorz Łagód
Adv. Sci. Technol. Res. J. 2021; 15(3):297-308
DOI: https://doi.org/10.12913/22998624/140788
 

Influence of Axial Compressor Model Simplification and Mesh Density on Surge Margin Evaluation
Rafał Muchowski, Sławomir Maciej Gubernat
Adv. Sci. Technol. Res. J. 2021; 15(3):243-253
DOI: https://doi.org/10.12913/22998624/140541
 

Travel Time Forecasting Based on Fuzzy Patterns
Adam Kiersztyn, Agnieszka Gandzel, Leopold Koczan, Maciej Celiński
Adv. Sci. Technol. Res. J. 2021; 15(3):224-232
DOI: https://doi.org/10.12913/22998624/140540
 

Conception of Hollow Axles Forming by Skew Rolling with Moving Mandrel
Zbigniew Pater, Patrycja Walczuk-Gągała
Adv. Sci. Technol. Res. J. 2021; 15(3):146-154
DOI: https://doi.org/10.12913/22998624/139134
 

Fire Detection Methods Based on Various Color Spaces and Gaussian Mixture Models
Amr Munshi
Adv. Sci. Technol. Res. J. 2021; 15(3):197-214
DOI: https://doi.org/10.12913/22998624/138924
 

Modelling Hydrocarbons Cold-Start Emission from Passenger Cars
Piotr Laskowski, Damian Zasina, Magdalena Zimakowska-Laskowska, Piotr Orliński
Adv. Sci. Technol. Res. J. 2021; 15(3):117-125
DOI: https://doi.org/10.12913/22998624/138764
 

Simulations as an Assessment Tool for the Feasibility of Logistics Innovations Motivated by the Emergence of Supply Chain Risk
David Strnad, Gabriel Fedorko, Vieroslav Molnár, Pavol Fialek
Adv. Sci. Technol. Res. J. 2021; 15(3):66-75
DOI: https://doi.org/10.12913/22998624/138726
 

Study on Tool Condition Parameters Intended for Smart Tool Management in Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2021; 15(3):108-116
DOI: https://doi.org/10.12913/22998624/138532
 

Design Principles of Horizontal Drum Machines with Low Vibration
Ilona Drach, Andrii Goroshko, Renata Dwornicka
Adv. Sci. Technol. Res. J. 2021; 15(2):258-268
DOI: https://doi.org/10.12913/22998624/136441
 

Application of Electronic Speckle Pattern Interferometry for Evaluation of the Static Stiffness of a Complex Orthopedic Implant
Piotr Mrozek, Piotr Borkowski
Adv. Sci. Technol. Res. J. 2021; 15(2):39-48
DOI: https://doi.org/10.12913/22998624/135805
 

Studies on Moisture Effects on Powder Flow and Mechanochemical Improvement of Powder Flowability
Opaliński Ireneusz, Chutkowski Marcin, Stasiak Mateusz, Leś Karolina, Olechowski Marcin, Przywara Mateusz
Adv. Sci. Technol. Res. J. 2021; 15(2):228-246
DOI: https://doi.org/10.12913/22998624/135395
 

Analysis of the Cruciform Sample Shapes for Bi-Axial Tensile Tests Based on the Geometries Currently Presented in the Literature
Grzegorz Mitukiewicz, Cezary Kuzalski, Jaroslaw Goszczak, Jacek Leyko, Zlatina Dimitrova, Damian Batory
Adv. Sci. Technol. Res. J. 2021; 15(2):156-168
DOI: https://doi.org/10.12913/22998624/135359
 

Enhancement of Aerodynamic Efficiency of Aerofoil Using Improved Blowing and Suction System
K. Balaji, G. Jims John Wessley
Adv. Sci. Technol. Res. J. 2021; 15(2):116-126
DOI: https://doi.org/10.12913/22998624/134642
 

Optimization of a Jet Engine Compressor Disc with Application of Artificial Neural Networks for Calculations Related to Time and Mass Criteria
Rafał Kieszek, Adam Kozakiewicz, Robert Rogólski
Adv. Sci. Technol. Res. J. 2021; 15(2):208-218
DOI: https://doi.org/10.12913/22998624/134061
 

Modeling of Compression Test of Natural Fiber Composite Sections
Grażyna Ryzińska, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):138-147
DOI: https://doi.org/10.12913/22998624/133486
 

Proposal of a Method for Measuring Gas Flow in a Heating Furnace: A Simulation Study
Marcel Pástor, Milan Durdán, Ján Kačur, Marek Laciak, Patrik Flegner
Adv. Sci. Technol. Res. J. 2021; 15(2):1-12
DOI: https://doi.org/10.12913/22998624/132952
 

Structural Analysis and Optimization of Electric Bike Front Drive with Bottom Bracket Electric Motor
Elmedin Mesic, Adnan Masic, Enis Muratović, Muamer Delic, Salem Hasanbegovic
Adv. Sci. Technol. Res. J. 2021; 15(1):273-282
DOI: https://doi.org/10.12913/22998624/132613
 

The Coupled Eulerian-Lagrangian Analysis of the KOBO Extrusion Process
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2021; 15(1):197-208
DOI: https://doi.org/10.12913/22998624/131663
 

Relative Change in SI Engine Performance Using Hydrogen and Alcohol as Fuel Supplements to Gasoline
Jehad Ahmad Yamin, Eiman Ali Eh Sheet, Khalid S. Rida
Adv. Sci. Technol. Res. J. 2021; 15(1):144-155
DOI: https://doi.org/10.12913/22998624/130999
 

Numerical Simulation of the Phase Transformations in Steels: A Case Study on Newly-Developed Multi-Phase Steels for Drop Forgings
Anna Wojtacha, Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(1):126-133
DOI: https://doi.org/10.12913/22998624/130863
 

Modeling of the Elastic Plates of Non-Base Configurations for the Cams of Automatic Half-Hose Machines
Leonid Berezin, Kyrylo Savchenko, Mykola Rubanka, Oleh Polishchuk, Olena Oliinyk, Alla Rubanka
Adv. Sci. Technol. Res. J. 2021; 15(1):92-98
DOI: https://doi.org/10.12913/22998624/130826
 

Fractographic Assessment and FEM Energy Analysis of the Penetrability of a 6061-T Aluminum Ballistic Panel by a Fragment Simulating Projectile
Aleksander Nieoczym, Drozd Kazimierz
Adv. Sci. Technol. Res. J. 2021; 15(1):50-57
DOI: https://doi.org/10.12913/22998624/129951
 

Optimization of Welding Pliers Production for the Automotive Industry – Case Study
Nikoleta Husakova Mikušová, Soňa Badiarová, Karel Jeřábek
Adv. Sci. Technol. Res. J. 2020; 14(4):240-249
DOI: https://doi.org/10.12913/22998624/128105
 

Modern Reverse Engineering Methods Used to Modification of Jewelry
Arkadiusz Kroma, Oliwia Adamczak, Robert Sika, Filip Górski, Wiesław Kuczko, Krzysztof Grześkowiak
Adv. Sci. Technol. Res. J. 2020; 14(4):298-306
DOI: https://doi.org/10.12913/22998624/128006
 

Implementation of the fuzzy analytical hierarchy process method in the determination of fishery shipyard clusters in Indonesia: Preliminary study
Rizwan Thaib, Razali Thaib, Ayana Rizki
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

Application of the analytic hierarchy process-fuzzy comprehensive evaluation method to assess the quality of electrophoresis on heavy-duty vehicle frames
Zi-Cheng Zhu, Wei-Jun Chu
Adv. Sci. Technol. Res. J. 2025; 19(1):363-370
DOI: https://doi.org/10.12913/22998624/195812
 

Prediction of crack path in concrete-like composite using XFEM method
Jakub Gontarz, Jerzy Podgórski
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

Fast approximation of matrix exponential and its application to problem of independent component analysis
Jerzy Józwik, Dariusz Mika, Fabio Leccese, Alessandro Ruggiero
 

Aerodynamic performance analysis of NACA 0018 airfoil at low Reynolds numbers in a low-turbulence wind tunnel
Krzysztof Rogowski, Robert Flemming Mikkelsen, Jan Michna, Jan Wiśniewski
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

Design and analysis of magneto-rheological relief valve using a permanent magnet
Maher Yahya Salloom, Mohammad Yahya Almuhanna
Adv. Sci. Technol. Res. J. 2025; 19(1):243-255
DOI: https://doi.org/10.12913/22998624/195494
 

The natural oscillations of perforated sifting surfaces with epicycloidal holes
Serhii Kharchenko, Sylwester Samborski, Jakub Paśnik, Farida Kharchenko
Adv. Sci. Technol. Res. J. 2025; 19(1):256-268
DOI: https://doi.org/10.12913/22998624/195463
 

Cooperative and individual planning strategies for autonomous robots in warehouse parcel transportation
Tomasz Grzejszczak, Witold Nocoń
Adv. Sci. Technol. Res. J. 2025; 19(1):406-418
DOI: https://doi.org/10.12913/22998624/195453
 

Analysis and prospects of efficient and precise forming technology for aeroengine turbine shafts
Lulu Chen, Xuedao Shu, Zbigniew Pater, Zixuan Li, Haijie Xu, yingxiang xia, Song Zhang, Qian Chen, Yongming Xu, Jaroslaw Bartnicki
Adv. Sci. Technol. Res. J. 2025; 19(1):132-147
DOI: https://doi.org/10.12913/22998624/195277
 

Simulation in the digital factory: A case study
Gabriel Fedorko, Nikoleta Mikusova, Lucia Cabanikova, Martin Vasil, Patrik Ondic
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

Comparison and mathematical modeling of surge avoidance methods in turbojet engine compressor
Ali Jasim Mohammed, Nabeel N Al-Mayyahi, Firas Lattef Hussany
Adv. Sci. Technol. Res. J. 2025; 19(1):148-159
DOI: https://doi.org/10.12913/22998624/195236
 

The kinematics of the manipulator with 1-DOF joints and controlled by elastic, inner ties
Dominik Ozog, Ryszard Leniowski
Adv. Sci. Technol. Res. J. 2025; 19(1):15-24
DOI: https://doi.org/10.12913/22998624/194892
 

Analysis of the possibility of using photovoltaic sources for autonomous cultivation of negatively photoblastic plants
Paweł Mirek, Marcin Panowski
Adv. Sci. Technol. Res. J. 2025; 19(1):390-405
DOI: https://doi.org/10.12913/22998624/194889
 

The Impact of Tube Arrangement in Latent Heat Thermal Energy Storage on the Melting Rate of Phase Change Material
Artur Szajding, Andrzej Gołdasz, Łukasz Łach, Pavel Eichler
Adv. Sci. Technol. Res. J. 2024; 18(8):366-374
DOI: https://doi.org/10.12913/22998624/194888
 

Simulation studies on the influence of clearances on the directional movement stability of articulated tracked unmanned ground vehicles
Mirosław Przybysz, Tomasz Muszyński, Karol Cieślik, Karol Kończalski
Adv. Sci. Technol. Res. J. 2025; 19(1):229-242
DOI: https://doi.org/10.12913/22998624/194887
 

Prediction of the sheet thickness effect on the formability of brass CuZn37 in single point incremental forming using Hooputra ductile damage model
Marwa K. Qate'a, Adnan I. Mohammed, Muhsin J. Jweg
Adv. Sci. Technol. Res. J. 2025; 19(1):95-110
DOI: https://doi.org/10.12913/22998624/194886
 

Time delay effect in double excited human middle ear
Robert Filip Zabłotni, Weronika Dabrowa, Zofia Szmit, Rafał Rusinek
Adv. Sci. Technol. Res. J. 2025; 19(1):88-94
DOI: https://doi.org/10.12913/22998624/194603
 

Statistical Long-Range Dependencies and Statistical Self-Similarity in Computer Systems Processing – The Case of Cache Bytes Counter
Bartosz Kowal, Dominik Strzalka
Adv. Sci. Technol. Res. J. 2024; 18(8):311-318
DOI: https://doi.org/10.12913/22998624/194428
 

Experimental and numerical study on the effectiveness of the barrier protecting explosive against electric initiation systems
Paweł Żochowski, Bogdan Krysinski, Jan Bagrowski, Jacek Borkowski
Adv. Sci. Technol. Res. J. 2025; 19(1):333-348
DOI: https://doi.org/10.12913/22998624/194205
 

Modeling and Studying the Effect of Using Multi-Anode Electrodes on the Physical and Chemical Properties After Electro-Kinetic Remediation of the Contaminated Soil
Israa Talib Abbas, Amal Hamza Khalil, Nisren jasim Almansori
Adv. Sci. Technol. Res. J. 2024; 18(8):113-124
DOI: https://doi.org/10.12913/22998624/194156
 

Research on selected location algorithms for the UGV operating in a follow-me scenario based on ultra-wideband positioning system
Łukasz Rykała, Mirosław Przybysz, Karol Cieślik, Piotr Krogul, Rafał Typiak, Andrzej Typiak
Adv. Sci. Technol. Res. J. 2025; 19(1):1-14
DOI: https://doi.org/10.12913/22998624/194149
 

Anisotropic Elastoplastic Behavior Formulation and Analysis of the Instability in the Large Deformations – A Numerical Modeling Study in Forming Processes
Khalid Zhani, Ahmed Chenaoui, Nabiha Saadi
Adv. Sci. Technol. Res. J. 2024; 18(8):156-166
DOI: https://doi.org/10.12913/22998624/194147
 

Free Vibration Analysis of Prestressed Timoshenko Beams Using the Modal Analysis Method
Nam Sy Nguyen, Cuong Xuan Nguyen, Hieu Trung Nguyen
Adv. Sci. Technol. Res. J. 2024; 18(8):125-141
DOI: https://doi.org/10.12913/22998624/194145
 

An Adaptive Predictor-Based Control Approach for Tracking Control of a Hydraulic Actuator System
Dao Thanh Liem, Nguyen Minh Huy, Le Van Nam, Ho Thi My Nu
Adv. Sci. Technol. Res. J. 2024; 18(7):419-436
DOI: https://doi.org/10.12913/22998624/193862
 

Analysis of energy consumption and cost savings in the process of transporting a hydromixture with the addition of a deflocculant
Beata Jaworska-Jóźwiak, Bartłomiej Szymczyk
Adv. Sci. Technol. Res. J. 2025; 19(1):36-47
DOI: https://doi.org/10.12913/22998624/193613
 

Research on high voltage DC and AC system integration in line with the electrified aircraft concept
Rafał Kowalik, Lucjan Setlak
Adv. Sci. Technol. Res. J. 2025; 19(2)
 

Investigation of Spectral Parameters of Constricted arc Plasma for Controlling Welding Processes and Related Technologies
Valeriy Chernyak, Volodymyr Korzhyk, Shiyi Gao, Vladyslav Khaskin, Oleksandr Voitenko, Yevhenii Illiashenko, Xinxin Wang, Andrii Grynyuk, Oksana Konoreva, Iryna Sviridova
Adv. Sci. Technol. Res. J. 2024; 18(7):250-263
DOI: https://doi.org/10.12913/22998624/193526
 

Energy Consumption and Driving Parameter Analysis in an 18-Meter Long Urban Bus with Compression Ignition Engine
Łukasz Grabowski
Adv. Sci. Technol. Res. J. 2024; 18(8):16-29
DOI: https://doi.org/10.12913/22998624/193426
 

Profiles of Wood Processing Occupational Accident Casualties by the Size of Enterprises
Marzena Nowakowska, Michał Pajęcki
Adv. Sci. Technol. Res. J. 2024; 18(7):329-346
DOI: https://doi.org/10.12913/22998624/193217
 

Drivetrain Modelling of Hybrid Electric Vehicles
Piotr Bera
Adv. Sci. Technol. Res. J. 2024; 18(7):305-328
DOI: https://doi.org/10.12913/22998624/193197
 

Design and Visualization of the Ten-Electrode GlidArc Plasma Reactor Using the Autodesk Inventor Environment
Piotr Krupski
Adv. Sci. Technol. Res. J. 2024; 18(7):192-202
DOI: https://doi.org/10.12913/22998624/193012
 

Machine Learning-Based Prediction of Biogas Production from Sludge Characteristics in Four Anaerobic Digesters: Development of the AD2Biogas Prediction Tool
Patryk Organiściak, Adam Andrzej Masłoń, Bartosz Kowal, Paweł Kuraś, Bartosz Wadiak, Sylwia Sikorska-Czupryna, Veronika Vanivska
Adv. Sci. Technol. Res. J. 2024; 18(8):1-15
DOI: https://doi.org/10.12913/22998624/192936
 

Implementing AI Collaborative Robots in Manufacturing – Modeling Enterprise Challenges in Industry 5.0 with Fuzzy Logic
Michał Cioch, Monika Kulisz, Łukasz Kański
Adv. Sci. Technol. Res. J. 2024; 18(7):229-238
DOI: https://doi.org/10.12913/22998624/192833
 

A Bipartite Graph for Estimating Measurement Uncertainty on Five-Axis Machining Centres
Roman Stryczek
Adv. Sci. Technol. Res. J. 2024; 18(6):449-464
DOI: https://doi.org/10.12913/22998624/192639
 

The Comparison of One-Variable and Two-Variable Polynomial Regression Models to Measure the Cellular Concrete Moisture Using the Time Domain Reflectometry Method
Magdalena Jastrzębska, Anna Futa, Dominika Mikušová, Zbigniew Suchorab
Adv. Sci. Technol. Res. J. 2024; 18(7):239-249
DOI: https://doi.org/10.12913/22998624/192595
 

Using Business Process Model and Notation 2.0 to Deploy Cobots in a Manufacturing System – Case Study
Jakub Pizoń, Łukasz Kański, Monika Kulisz, Jan Chadam, Eduardo Sánchez García
Adv. Sci. Technol. Res. J. 2024; 18(7):150-162
DOI: https://doi.org/10.12913/22998624/192491
 

Identification of an Arbitrary Shape Obstacle of Scattering Problem Using Near Field Data
Tomasz Rymarczyk, Jan Sikora, Monika Kulisz, Grzegorz Kłosowski
Adv. Sci. Technol. Res. J. 2024; 18(7):396-405
DOI: https://doi.org/10.12913/22998624/192489
 

Extended Evaluation of the Impact of Rainfall, Sewer Network and Land Use Retention on Drainage System Performance in a Multi-Criteria Approach – Modeling, Sensitivity Analysis
Bartosz Szeląg, Francesco Fatone, Adam Kiczko, Dariusz Majerek, Anita Białek, Grzegorz Łagód, Adam Piotrowicz, Lidia Dąbek
Adv. Sci. Technol. Res. J. 2024; 18(6):291-303
DOI: https://doi.org/10.12913/22998624/192023
 

Influence of Incidental Water on Changes in the Amount of Wastewater Flowing into the Treatment Plant
Karolina Jóźwiakowska, Grzegorz Kaczor, Andrzej Marczuk, Piotr Bugajski
Adv. Sci. Technol. Res. J. 2024; 18(6):392-405
DOI: https://doi.org/10.12913/22998624/192021
 

Analysis of the Dimensional Accuracy of Point Clouds Created by Photographic Scanning
Karol Kwieciński, Maciej Paluch, Aleksandra Lisowska
Adv. Sci. Technol. Res. J. 2024; 18(6):121-132
DOI: https://doi.org/10.12913/22998624/191430
 

Tennis Patterns Recognition Based on a Novel Tennis Dataset – 3DTennisDS
Maria Skublewska-Paszkowska, Pawel Powroznik, Edyta Lukasik, Jakub Smolka
Adv. Sci. Technol. Res. J. 2024; 18(6):159-176
DOI: https://doi.org/10.12913/22998624/191264
 

Development o the Design of an Experimental Adsorber and Optimization of its Gas-Dynamic Parameters
Vasyl Mykhailiuk, Damian Dzienniak, Yevstakhiy Kryzhanivskyy, Ruslan Deineha, Roman Stetsiuk, Andrzej Uhryński, Tomasz Rokita
Adv. Sci. Technol. Res. J. 2024; 18(6):177-188
DOI: https://doi.org/10.12913/22998624/191263
 

The Effect of Energy Components Modifications on the Crashworthiness of Thin-Walled Structures
Michał Rogala, Jakub Gajewski
Adv. Sci. Technol. Res. J. 2024; 18(6):110-120
DOI: https://doi.org/10.12913/22998624/191194
 

Two-Stage Golomb – Context-Adaptive Binary Arithmetic Coders Coding in Lossless Image Compression
Małgorzata Frydrychowicz, Grzegorz Ulacha
Adv. Sci. Technol. Res. J. 2024; 18(6):62-85
DOI: https://doi.org/10.12913/22998624/191111
 

Laser Ultrasonic Technique for Simultaneous Measurement of Thickness, Slope, and Wave Velocities for Slope Plate in the Thermoelastic Regime
Nguyen Tien Dung, Yoshio Arai
Adv. Sci. Technol. Res. J. 2024; 18(5):217-233
DOI: https://doi.org/10.12913/22998624/191014
 

Implementation of Blended Learning Approach for Tertiary Level Training on Vehicle Electrification
Theodoros Kosmanis, Krzysztof Górski, Dimitrios Tziourtzioumis, Przemysław Sander, Smigins Ruslans
Adv. Sci. Technol. Res. J. 2024; 18(7):138-149
DOI: https://doi.org/10.12913/22998624/190948
 

Developing a High-Performance System to Strengthen Construction Structures Against Mechanical Fatigue Using Shape Memory Materials
Amine Riad, Mouna Ben Zohra, Abdelilah Alhamany
Adv. Sci. Technol. Res. J. 2024; 18(5):186-194
DOI: https://doi.org/10.12913/22998624/190688
 

Determining the Environmental Impact of Cradle to Gate in Coal-Fired Power Generation
Pramudita Triatmojo, Febrian Hadinata, Tuti Indah Sari
Adv. Sci. Technol. Res. J. 2024; 18(5):195-205
DOI: https://doi.org/10.12913/22998624/190677
 

Derivation of Material Constants for Experimental SKR-788 Silicone Samples via Simulation Modeling and Laboratory Testing
Vasyl Mykhailiuk, Yevstakhiy Kryzhanivskyy, Yurii Mosora, Ruslan Deineha, Damian Dzienniak, Szymon Bajda, Michał Bembenek
Adv. Sci. Technol. Res. J. 2024; 18(5):268-276
DOI: https://doi.org/10.12913/22998624/190411
 

Research on the Use of Multifrequency Excitations for Energy Harvesting in a Combustion Engine
Jacek Caban, Paweł Stączek, Piotr Wolszczak, Radosław Nowak, Stanisław Karczmarzyk
Adv. Sci. Technol. Res. J. 2024; 18(5):400-412
DOI: https://doi.org/10.12913/22998624/190250
 

A Numerical Study of the Influence of Cone Angle of the Breakout Anchor Head on the Crack Trajectory of the Medium
Andrzej Wójcik, Józef Jonak, Robert Karpiński, Kamil Jonak, Dariusz Prostański, Roman Kaczyński
Adv. Sci. Technol. Res. J. 2024; 18(5):101-112
DOI: https://doi.org/10.12913/22998624/190133
 

Using the Design of Experimental Method for Problem-solving of Noisy Parts in the Automotive Industry
Vladimíra Schindlerová, Václav Sýkora, Dana Stančeková, Jozef Mrázik
Adv. Sci. Technol. Res. J. 2024; 18(5):65-74
DOI: https://doi.org/10.12913/22998624/190060
 

Theoretical Analysis of Radial-Axial Ring Rolling Process of 7075 Aluminium Alloy
Jarosław Lulkiewicz, Anna Kawałek, Teresa Bajor, Maria Gąsiorkiewicz, Szymon Szkudelski, Michał Chruściński, Stanisław Ziółkiewicz
Adv. Sci. Technol. Res. J. 2024; 18(4):386-399
DOI: https://doi.org/10.12913/22998624/189901
 

A New Envelope Computational Method for Meshing Heliacal Gears Profiling Applied to Air Compressor Screw Pair
Long Hoang
Adv. Sci. Technol. Res. J. 2024; 18(4):347-354
DOI: https://doi.org/10.12913/22998624/189674
 

Investigating Vibration Transmission in Cargo Containers During Heavy-Duty Off-Road Transport
Radu Vilau, Daniela Voicu, Ramona-Monica Stoica, Ticusor Ciobotaru, Magdalena Rykała, Łukasz Rykała
Adv. Sci. Technol. Res. J. 2024; 18(4):312-328
DOI: https://doi.org/10.12913/22998624/189613
 

Forging of a Hollow Ball Using a Deformable Insert Assembly
Grzegorz Samołyk
Adv. Sci. Technol. Res. J. 2024; 18(5):32-40
DOI: https://doi.org/10.12913/22998624/189592
 

Evolutionary and Sparse Regression Approach for Data-Driven Modelling of an Overhead Crane Dynamics
Tom Kusznir, Jarosław Smoczek, Bolesław Karwat
Adv. Sci. Technol. Res. J. 2024; 18(4):282-295
DOI: https://doi.org/10.12913/22998624/189497
 

Design and Analysis LCCL–LC Compensation for Electric Vehicle Systems
Mokhalad Khaleel Alghrairi, Saad Mutashar, Waleed Algriree, Hussein Mohammed Ridha, Bayan Mahdi Sabbar
Adv. Sci. Technol. Res. J. 2024; 18(4):273-281
DOI: https://doi.org/10.12913/22998624/189465
 

Study of the Effects of Heat Exchanger Location on Turbofan Engine Performance
Robert Jakubowski, Arkadiusz Bednarz, Łukasz Rogalski
Adv. Sci. Technol. Res. J. 2024; 18(4):355-368
DOI: https://doi.org/10.12913/22998624/189464
 

The Role of Cathode Heat in the Schottky Correction in the Ionization Layers of Arc Plasma
Tapark Abdlraheem Saber, Rafid Abbas Ali, Huda Muhammad Jawad
Adv. Sci. Technol. Res. J. 2024; 18(4):265-272
DOI: https://doi.org/10.12913/22998624/189290
 

Numerical Study of Rotary Friction Welding of Automotive Components
Wojciech Więckowski, Piotr Lacki, Anna Derlatka, Paweł Wieczorek
Adv. Sci. Technol. Res. J. 2024; 18(4):336-346
DOI: https://doi.org/10.12913/22998624/188742
 

Fuel-Saving Solution for Forklifts Using Hydraulic Energy Storage and Regeneration Device Cluster Additionally Installed
Van Tinh Nguyen
Adv. Sci. Technol. Res. J. 2024; 18(4):137-148
DOI: https://doi.org/10.12913/22998624/188590
 

Mathematical Evaluation of Passenger and Freight Rail Transport as Viewed Through the COVID-19 Pandemic and the War in Ukraine Situation
Anna Borucka, Edward Kozłowski
Adv. Sci. Technol. Res. J. 2024; 18(4):238-249
DOI: https://doi.org/10.12913/22998624/188503
 

Influence of Material State on Austenitic Transformation in HSLA-Type Steel
Anna Wojtacha, Mateusz Morawiec, Marek Opiela
Adv. Sci. Technol. Res. J. 2024; 18(4):66-75
DOI: https://doi.org/10.12913/22998624/188323
 

Numerical Modelling of a Rotary Compression Test on a Cylindrical Specimen
Zbigniew Pater
Adv. Sci. Technol. Res. J. 2024; 18(4):23-32
DOI: https://doi.org/10.12913/22998624/188026
 

High-Temperature Two-Stage Subcritical Heat Pump Running on Environmentally Friendly Refrigerants
Paweł Obstawski, Krzysztof Tomczuk
Adv. Sci. Technol. Res. J. 2024; 18(3):369-381
DOI: https://doi.org/10.12913/22998624/187103
 

Applying the Machine Learning Method to Improve Calibration Quality of Time Domain Reflectometry Measuring Technique
Dominika Mikušová, Zbigniew Suchorab, Magdalena Paśnikowska-Łukaszuk, Jacek Zaburko, Anton Trnik
Adv. Sci. Technol. Res. J. 2024; 18(3):270-279
DOI: https://doi.org/10.12913/22998624/187007
 

Implementation and Performance Evaluation of a Model Predictive Controller for a Semi-Autogenous Grinding Mill
Dipali Rohit Shende, Abner Simon
Adv. Sci. Technol. Res. J. 2024; 18(3):257-269
DOI: https://doi.org/10.12913/22998624/186763
 

The Process of Bending Pipes for Components of Aircraft Frames and Trusses
Paweł Bałon, Edward Rejman, Bartłomiej Kiełbasa, Robert Smusz, Grzegorz Szeliga
Adv. Sci. Technol. Res. J. 2024; 18(3):333-342
DOI: https://doi.org/10.12913/22998624/186745
 

Stability of Thin-Walled Composite Structures with Closed Sections Under Compression
Kuba Rosłaniec, Patryk Różyło
Adv. Sci. Technol. Res. J. 2024; 18(3):188-199
DOI: https://doi.org/10.12913/22998624/186473
 

Simulation and Experimental Study of the Termo-Mechanical Effect of the Milling Process of 7075 Aluminium Alloy
Witold Habrat, Joanna Lisowicz, Jarosław Tymczyszyn, Anna Skroban
Adv. Sci. Technol. Res. J. 2024; 18(3):58-66
DOI: https://doi.org/10.12913/22998624/185680
 

Analyzing the Impact of Population Size in AI-Based Reconstruction of the Thermal Parameter in Heat Conduction Modeling
Elzbieta Gawronska, Maria Anna Zych, Robert Dyja, Michal Kowalkowski
Adv. Sci. Technol. Res. J. 2024; 18(2):349-364
DOI: https://doi.org/10.12913/22998624/185298
 

Computational Fluid Dynamics Studies of a Vertical Axis Wind Turbine with a Variable Swept Area
Idzi Pędzisz, Paweł Magryta, Konrad Pietrykowski
Adv. Sci. Technol. Res. J. 2024; 18(2):333-348
DOI: https://doi.org/10.12913/22998624/185255
 

Artificial Intelligence Based Emergency Identification Computer System
Diana Velychko, Halyna Osukhivska, Yuri Palaniza, Nadiia Lutsyk, Łukasz Sobaszek
Adv. Sci. Technol. Res. J. 2024; 18(2):296-304
DOI: https://doi.org/10.12913/22998624/184343
 

Modeling and Analysis of Fuel Cell Power Generation System Using Proportional Integral Speed Controller
Satyanarayana Addala, I.E.S. Naidu