PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access

Topic Civil Engineering and Transport

 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

The Effect of Undercut Anchor Diameter on the Rock Failure Cone Area in Pullout Tests
Józef Jonak, Robert Karpiński, Andrzej Wójcik, Michał Siegmund
Adv. Sci. Technol. Res. J. 2022; 16(5):261-270
DOI: https://doi.org/10.12913/22998624/154894
 

Impact of T-Splitter on the Laminar Flow Field Around Cylinder Pier
Rafi Mohammed Qasim, Safaa Hameed Faisal, Tahseen Ali Jabbar
Adv. Sci. Technol. Res. J. 2022; 16(5):202-215
DOI: https://doi.org/10.12913/22998624/154795
 

Biogas Recovery from Refinery Oily Sludge by Co-Digestion Followed by Sustainable Approach for Recycling the Residual Digestate in Concrete Mixes
Zainab Ziad Ismail, Hassan Saad Jasim
Adv. Sci. Technol. Res. J. 2022; 16(5):178-191
DOI: https://doi.org/10.12913/22998624/154038
 

Flexure Behavior of Carbon Fiber Reinforced Polymers Retrofitted RC Beams
Muhammad Fahim, Muhammad Saeed, Haris Khan, Alam Gir, Shahid Ullah
Adv. Sci. Technol. Res. J. 2022; 16(2):188-195
DOI: https://doi.org/10.12913/22998624/147337
 

Numerical Simulation of the Airport Evacuation Process under Fire Conditions
Michał Jasztal, Łukasz Omen, Maciej Kowalski, Waldemar Jaskółowski
Adv. Sci. Technol. Res. J. 2022; 16(2):249-261
DOI: https://doi.org/10.12913/22998624/147280
 

Investigating the Effect of Sisal Fibre Content on Durability Properties of Lightweight Foamed Concrete
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(2):141-149
DOI: https://doi.org/10.12913/22998624/147065
 

Experimental Analysis of the Post-Buckling Behaviour of Compressed Stiffened Panel with Refill Friction Stir Spot Welded and Riveted Stringers
Andrzej Kubit, Łukasz Święch, Tomasz Trzepieciński, Koen Faes
Adv. Sci. Technol. Res. J. 2022; 16(2):159-167
DOI: https://doi.org/10.12913/22998624/146899
 

An Integrated Approach of Profile Studies for Surface Water Velocity on a Steep Slope in a Rectangular Channel
Abebe Temesgen Ayalew, Abera Ermias Koshuma, Mesfin Amaru Ayele, Democracy Dilla Dirate
Adv. Sci. Technol. Res. J. 2022; 16(2):74-80
DOI: https://doi.org/10.12913/22998624/145965
 

Testing the Use of Rounded Valley Aggregate in Concrete Mix in Comparison with Crushed Limestone Aggregate
Mohmd Kh Sarireh
Adv. Sci. Technol. Res. J. 2022; 16(1):282-293
DOI: https://doi.org/10.12913/22998624/145497
 

Rational Liquid Cooling Systems of Internal Combustion Engines
Yuryi Moshentsev, Oleksiy Gogorenko, Olha Dvirna
Adv. Sci. Technol. Res. J. 2022; 16(1):158-169
DOI: https://doi.org/10.12913/22998624/144345
 

Cellular Beams with Closely Spaced Web Openings – A Review of Analytical Calculation Models for Web-Post Buckling
Przemysław Saternus
Adv. Sci. Technol. Res. J. 2022; 16(1):213-230
DOI: https://doi.org/10.12913/22998624/144146
 

Areas of Investigation into Air Intake Systems for the Impact on Compressor Performance Stability in Aircraft Turbine Engines
Mirosław Wróblewski, Maciej Adamczyk, Adam Kozakiewicz
Adv. Sci. Technol. Res. J. 2022; 16(1):62-74
DOI: https://doi.org/10.12913/22998624/143290
 

Vulnerability Assessment of Steel Structures with Plan Irregularities Subjected to Fire
Bhavana Jadhav, Ravindra Ramanand
Adv. Sci. Technol. Res. J. 2021; 15(4):273-282
DOI: https://doi.org/10.12913/22998624/142739
 

Review of Green Buildings Spreading and Levels
Mohmd Sarireh
Adv. Sci. Technol. Res. J. 2021; 15(4):81-92
DOI: https://doi.org/10.12913/22998624/142663
 

Effect of Adhesive Joint End Shapes on the Ultimate Load-Bearing Capacity of Carbon Fibre-Reinforced Polymer/Steel Bonded Joints
Maciej Kowal
Adv. Sci. Technol. Res. J. 2021; 15(4):299-310
DOI: https://doi.org/10.12913/22998624/142370
 

Dynamics of Railway Vehicles Movement on Transition Curves
Agata Basak, Edward Nowak
Adv. Sci. Technol. Res. J. 2021; 15(4):21-29
DOI: https://doi.org/10.12913/22998624/142237
 

Sensitivity Analysis for Influence Parameters of Rail Corrugation Characteristics in Metro Straight Section
Zhiqiang Wang, Zhenyu Lei
Adv. Sci. Technol. Res. J. 2021; 15(4):110-117
DOI: https://doi.org/10.12913/22998624/142034
 

A Model for Planning Wagonload Freight Transport Under Relative Uncertainty
Tadeusz Cisowski, Łukasz Wojciechowski, Jarosław Zubrzycki, Arkadiusz Małek
Adv. Sci. Technol. Res. J. 2021; 15(4):332-341
DOI: https://doi.org/10.12913/22998624/141963
 

Simulation of the Griffith's Crack Using Own Method of Predicting the Crack Propagation
Jerzy Podgórski, Jakub Gontarz
Adv. Sci. Technol. Res. J. 2021; 15(4):1-13
DOI: https://doi.org/10.12913/22998624/141908
 

Direct and In-Direct Strength Evaluation of Refractory Structural Elements Subjected to Temperature Cycles
Ganesh D. Awchat
Adv. Sci. Technol. Res. J. 2021; 15(4):160-173
DOI: https://doi.org/10.12913/22998624/141260
 

Travel Time Forecasting Based on Fuzzy Patterns
Adam Kiersztyn, Agnieszka Gandzel, Leopold Koczan, Maciej Celiński
Adv. Sci. Technol. Res. J. 2021; 15(3):224-232
DOI: https://doi.org/10.12913/22998624/140540
 

Cost-Benefit Analysis of Using Recycled Coarse Aggregate In Plain and Fiber Reinforced Concrete
Ganesh Deoraoji Awchat
Adv. Sci. Technol. Res. J. 2021; 15(3):233-242
DOI: https://doi.org/10.12913/22998624/139205
 

Modelling Hydrocarbons Cold-Start Emission from Passenger Cars
Piotr Laskowski, Damian Zasina, Magdalena Zimakowska-Laskowska, Piotr Orliński
Adv. Sci. Technol. Res. J. 2021; 15(3):117-125
DOI: https://doi.org/10.12913/22998624/138764
 

Research of Nitrogen Oxides Concentrations in Exhaust Gas of Compression Ignition Engine Fuelled with Alternative Fuel
Mieczysław Sikora, Piotr Orliński, Mateusz Bednarski
Adv. Sci. Technol. Res. J. 2021; 15(2):75-83
DOI: https://doi.org/10.12913/22998624/135597
 

Effects of Hydrated Lime on Moisture Susceptibility of Asphalt Concrete
Mohammad Nour Ibrahim Al-Marafi
Adv. Sci. Technol. Res. J. 2021; 15(2):13-17
DOI: https://doi.org/10.12913/22998624/135585
 

Evaluation of Mechanical Properties of Lightweight Concrete with Pumice Aggregate
Malik Salman Shafiq, Fasih Ahmed Khan, Yasir Irfan Badrashi, Fayaz Ahmed Khan, Muhammad Fahim, Asim Abbas, Waqas Adil
Adv. Sci. Technol. Res. J. 2021; 15(2):30-38
DOI: https://doi.org/10.12913/22998624/135198
 

Use of Rice Husk Ash as Partial Replacement of Cement in Sandcrete Blocks
Wajid Khan, Muhammad Fahim, Saeed Zaman, Sajjad Wali Khan, Yasir Irfan Badrashi, Fayaz Khan
Adv. Sci. Technol. Res. J. 2021; 15(2):101-107
DOI: https://doi.org/10.12913/22998624/133470
 

Experimental Verification of Standard Recommendations for Estimating the Load-Carrying Capacity of Undercut Anchors in Rock Material
Józef Jonak, Robert Karpiński, Michał Siegmund, Anna Machrowska, Dariusz Prostański
Adv. Sci. Technol. Res. J. 2021; 15(1):230-244
DOI: https://doi.org/10.12913/22998624/132279
 

Sustainable Approach for Recycling Medical Waste Needles to Partially Replace Aggregate in Lightweight Concrete Production
Lubna Kahtan Hamada, Zainab Ziad Ismail
Adv. Sci. Technol. Res. J. 2021; 15(1):166-173
DOI: https://doi.org/10.12913/22998624/131557
 

Low Temperature Combustion of Jet Propellant-8 Fuel in Compression Ignition Engine with the Low Compression Ratio
Grzegorz Marek Pawlak, Patryk Płochocki, Tomasz Skrzek
Adv. Sci. Technol. Res. J. 2020; 14(4):273-283
DOI: https://doi.org/10.12913/22998624/127796
 

The Study on the Damage of the Rear-Axle Shaft in a KIA Truck
Krzysztof Siczek, Marek Wozniak, Gustavo Ozuna
Adv. Sci. Technol. Res. J. 2020; 14(4):115-124
DOI: https://doi.org/10.12913/22998624/126508
 

Reducing Delay Time at Signal Controlled Junction with the Help of Actuated Control
Ľubomír Černický, Jana Kupčuljaková, Jozef Paľo, Alica Kalašová
Adv. Sci. Technol. Res. J. 2020; 14(3):149-157
DOI: https://doi.org/10.12913/22998624/122778
 

Braking Characteristics of the Specified Modern Electric Vehicle During Intensive Braking
Eduard Kolla, Ján Ondruš, Marián Gogola, Željko Šarić
Adv. Sci. Technol. Res. J. 2020; 14(3):125-134
DOI: https://doi.org/10.12913/22998624/122197
 

Point Protection of Primary Beams of Steel Grillages Against Lateral Torsional Buckling
Rafał Piotrowski, Monika Siedlecka
Adv. Sci. Technol. Res. J. 2020; 14(3):1-8
DOI: https://doi.org/10.12913/22998624/121532
 

Assessing the Impact of the Change in the Tire Pressure on the Rolling Resistance and Fuel Consumption
František Synák, Alica Kalašová
Adv. Sci. Technol. Res. J. 2020; 14(3):100-106
DOI: https://doi.org/10.12913/22998624/120801
 

Concrete Capillarity under Different Curing Conditions Produced in Kurdistan-Iraq
Bengin Herki
Adv. Sci. Technol. Res. J. 2020; 14(2):131-139
DOI: https://doi.org/10.12913/22998624/118942
 

Effect of Test Velocity on the Energy Absorption Under Progressive Crushing of Composite Tubes
Grażyna Ryzińska, Roman Gieleta
Adv. Sci. Technol. Res. J. 2020; 14(2):94-102
DOI: https://doi.org/10.12913/22998624/118551
 

Visual Effects of Surface Emissivity in Thermal Imaging
Arkadiusz Urzędowski, Dorota Wójcicka-Migasiuk, Barbara Buraczyńska
Adv. Sci. Technol. Res. J. 2020; 14(2):215-222
DOI: https://doi.org/10.12913/22998624/118103
 

Proposal of a Mechanism for Car Seat Movement
Vladimír Pavelčík, Dalibor Barta, Milan Sapieta
Adv. Sci. Technol. Res. J. 2020; 14(1):50-57
DOI: https://doi.org/10.12913/22998624/113286
 

The Use of a Plate Conveyor for Transporting Aluminum Cans in the Food Industry
Iwona Katarzyna Rybicka, Jacek Caban
Adv. Sci. Technol. Res. J. 2020; 14(1):26-31
DOI: https://doi.org/10.12913/22998624/113283
 

Influence of Semi-Active Suspension Characteristics on the Driving Comfort
Robertas Pečeliūnas
Adv. Sci. Technol. Res. J. 2020; 14(1):18-25
DOI: https://doi.org/10.12913/22998624/113282
 

Analysis of the Possibilities of Improving the Selected Properties Surface Layer of Butt Joints Made Using the FSW Method
Magdalena Bucior, Rafał Kluz, Andrzej Kubit, Kamil Ochał
Adv. Sci. Technol. Res. J. 2020; 14(1):1-9
DOI: https://doi.org/10.12913/22998624/111662
 

Analysis of Fly Ash Concrete with Scanning Electron Microscopy and X-Ray Diffraction
Burhan Uzbaş, Abdulkadir Cüneyt Aydin
Adv. Sci. Technol. Res. J. 2019; 13(4):100-110
DOI: https://doi.org/10.12913/22998624/114178
 

Proposal of Conversion the Tugboat Engines to Diesel - LNG Operation
Martin Jurkovič, Tomas Kalina, Lubomir Jancosek, Robert Kadnar, Piotr Gorzelanczyk, Karel Jerabek
Adv. Sci. Technol. Res. J. 2019; 13(4):129-142
DOI: https://doi.org/10.12913/22998624/113424
 

Modelling Noise Exposure by Means of Infrared Technology
Gabriel Fedorko, David Heinz, Vieroslav Molnár, Tomas Brenner
Adv. Sci. Technol. Res. J. 2019; 13(4):230-238
DOI: https://doi.org/10.12913/22998624/112683
 

Convergence Analysis of Finite Element Approach to Classical Approach for Analysis of Plates in Bending
Ferdinand Niyonyungu, Jules Karangwa
Adv. Sci. Technol. Res. J. 2019; 13(4):170-180
DOI: https://doi.org/10.12913/22998624/111703
 

Traffic Modelling of the Circular Junction in the City of Žilina
Kristián Čulík, Veronika Harantová, Alica Kalašová
Adv. Sci. Technol. Res. J. 2019; 13(4):162-169
DOI: https://doi.org/10.12913/22998624/111476
 

Identifying Optimal FSW Process Parameters for 2024 Al Alloy Butt Joints
Rafał Kluz, Magdalena Bucior, Andrzej Kubit
Adv. Sci. Technol. Res. J. 2019; 13(4):48-53
DOI: https://doi.org/10.12913/22998624/110740
 

Fretting-Wear Mechanism of Textured Surfaces
Mykhaylo Pashechko, Volodymyr Marchuk, Myroslav Kindrachuk, Oleksandr Tisov, Anatolii Kornienko, Oleksandr Dukhota
Adv. Sci. Technol. Res. J. 2019; 13(3):186-191
DOI: https://doi.org/10.12913/22998624/111966
 

A Risk Analysis and Ranking Application for Lifting Vehicles Used in Construction Sites with Integrated AHP and Fine-Kinney Approach
Fatih Yılmaz, Mehmet Selim Ozcan
Adv. Sci. Technol. Res. J. 2019; 13(3):152-161
DOI: https://doi.org/10.12913/22998624/111779
 

Experimental Research of the Weakening of the fFuselage Skin by RFSSW Single Row Joints
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Wojciech Bochnowski, Ryszard Perłowski
Adv. Sci. Technol. Res. J. 2019; 13(3):90-97
DOI: https://doi.org/10.12913/22998624/110373
 

Studying the Flexural Behavior of Reinforced Concrete Beams under the Effect of High Temperature: A Finite Element Model
Hamadallah Al-Baijat, Mohammad Ahmad Alhawamdeh, Aya Khawaldeh
Adv. Sci. Technol. Res. J. 2019; 13(2):150-156
DOI: https://doi.org/10.12913/22998624/109055
 

Examination of Aircraft 's Cable Control Systems Tension
Józef Sebastian Brzęczek
Adv. Sci. Technol. Res. J. 2019; 13(2):65-71
DOI: https://doi.org/10.12913/22998624/106238
 

Plasma Actuator with Two Mesh Electrodes to Control the Flow Boundary Layer
Ernest Gnapowski
Adv. Sci. Technol. Res. J. 2019; 13(2):31-37
DOI: https://doi.org/10.12913/22998624/106134
 

Review of Selected Methods for Increasing the Aerodynamic Force of the Wing
Ernest Gnapowski
Adv. Sci. Technol. Res. J. 2019; 13(1):60-67
DOI: https://doi.org/10.12913/22998624/103858
 

Analysis of the operating conditions of the ASz-62IR engine during flight
Piotr Andrzej Jakliński, Jacek Czarnigowski, Karol Jan Ścisłowski
 

Application of the multifractal spectrum to the analysis of vibration signals generated during testing of selected composite materials
Tomasz FIGLUS, Mateusz Kozioł
 

Validation of numerical and analytical model of bearing type bolted steel lap joint with friction-slip mechanism and a threaded portion of the shank in bearing
Małgorzata Snela, Rafał Budziński, Lucjan Ślęczka
Adv. Sci. Technol. Res. J. 2024; 18(7)
 

Implementation of Unmanned Aerial Vehicles in the Automated Assessment of Geodetic Database Validity
Klaudia Maciąg, Michał Maciąg, Przemysław Leń
 

Influence of Incidental Water on Changes in the Amount of Wastewater Flowing into the Treatment Plant
Karolina Jóźwiakowska, Grzegorz Kaczor, Andrzej Marczuk, Piotr Bugajski
Adv. Sci. Technol. Res. J. 2024; 18(6):392-405
DOI: https://doi.org/10.12913/22998624/192021
 

Frost Resistance of Concretes with Low-Clinker Cements Depending on Curing Time
Jacek Góra, Małgorzata Grzegorczyk-Frańczak
Adv. Sci. Technol. Res. J. 2024; 18(6):406-421
DOI: https://doi.org/10.12913/22998624/191891
 

Fault Detection and Diagnostic Methods for Railway Systems – A Literature Survey
Jakub Wróbel, Paweł Bury, Mateusz Zając, Artur Kierzkowski, Sławomir Tubek, Jędrzej Blaut
Adv. Sci. Technol. Res. J. 2024; 18(6):361-391
DOI: https://doi.org/10.12913/22998624/191762
 

Water Absorption and Microbial Corrosion Resistance of Hemp Concrete Modified with the Acid Casein Admixture
Przemysław Brzyski, Urszula Gąska-Jędruch
Adv. Sci. Technol. Res. J. 2024; 18(6):432-448
DOI: https://doi.org/10.12913/22998624/191695
 

Determination of the Load-Bearing Capacity of the Bonded Joint of Hot-Dip Galvanised Steel Elements with CFRP Fabric – Pilot Laboratory and Numerical Investigations
Katarzyna Rzeszut, Maciej Adam Dybizbański, Ilona Szewczak
Adv. Sci. Technol. Res. J. 2024; 18(6):206-217
DOI: https://doi.org/10.12913/22998624/191429
 

The Optimizing the Vehicle Selection Decision in Carsharing Systems
Ewelina Sendek-Matysiak
Adv. Sci. Technol. Res. J. 2024; 18(6):86-96
DOI: https://doi.org/10.12913/22998624/191112
 

Implementation of Blended Learning Approach for Tertiary Level Training on Vehicle Electrification
Theodoros Kosmanis, Krzysztof Górski, Dimitrios Tziourtzioumis, Przemysław Sander, Smigins Ruslans
 

Influence of Butanol-Diesel Oil Fuel Blends on Marine Engine Vibration Characteristics
Marcin Kluczyk
Adv. Sci. Technol. Res. J. 2024; 18(5):372-384
DOI: https://doi.org/10.12913/22998624/190834
 

Developing a High-Performance System to Strengthen Construction Structures Against Mechanical Fatigue Using Shape Memory Materials
Amine Riad, Mouna Ben Zohra, Abdelilah Alhamany
Adv. Sci. Technol. Res. J. 2024; 18(5):186-194
DOI: https://doi.org/10.12913/22998624/190688
 

Investigation of Hot-Dip Galvanising Influence on the Buckling Resistance of Steel Angles
Marcin Górecki, Kamil Jastrzębski, Lucjan Ślęczka
Adv. Sci. Technol. Res. J. 2024; 18(5):332-341
DOI: https://doi.org/10.12913/22998624/190548
 

Heat Flow Through a Wall with a Thermal Barrier
Dorota Leciej-Pirczewska, Władysław Szaflik
Adv. Sci. Technol. Res. J. 2024; 18(5):277-286
DOI: https://doi.org/10.12913/22998624/190474
 

Analysis of the Impact of Selected Factors on Damage to Rolling Bearings of Rail Vehicle Wheelsets
Paweł Biel, Maciej Szkoda, Magdalena Machno
Adv. Sci. Technol. Res. J. 2024; 18(5):206-216
DOI: https://doi.org/10.12913/22998624/190364
 

Comparison of Mechanical Properties of Ad Hoc T-Section Reinforced Concrete Beams Made of Concrete with the Use of Natural and Recycled Aggregate
Barbara Sadowska-Buraczewska, Justyna Kujawska
Adv. Sci. Technol. Res. J. 2024; 18(6):465-475
DOI: https://doi.org/10.12913/22998624/190252
 

Research on the Use of Multifrequency Excitations for Energy Harvesting in a Combustion Engine
Jacek Caban, Paweł Stączek, Piotr Wolszczak, Radosław Nowak, Stanisław Karczmarzyk
Adv. Sci. Technol. Res. J. 2024; 18(5):400-412
DOI: https://doi.org/10.12913/22998624/190250
 

A Numerical Study of the Influence of Cone Angle of the Breakout Anchor Head on the Crack Trajectory of the Medium
Andrzej Wójcik, Józef Jonak, Robert Karpiński, Kamil Jonak, Dariusz Prostański, Roman Kaczyński
Adv. Sci. Technol. Res. J. 2024; 18(5):101-112
DOI: https://doi.org/10.12913/22998624/190133
 

Analysis of Replacement of Internal Combustion Engine with the Hydrogen Fuel Cell in Ship Powertrain
Rafał Krakowski
Adv. Sci. Technol. Res. J. 2024; 18(5):385-399
DOI: https://doi.org/10.12913/22998624/190130
 

Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing – Preliminary Study
Przemysław Klik, Adam Cisowski, Witold Rządkowski, Paweł Pyrzanowski, Michał Piotr Kowalik
Adv. Sci. Technol. Res. J. 2024; 18(5):41-50
DOI: https://doi.org/10.12913/22998624/189847
 

Influence of Dimethyl Ether Combustion in the Compression-Ignition Engine on the Peak and Effective Measures of the Vibroacoustic Process and Toxic Compounds Emission
Marek Waligórski, Maciej Bajerlein, Wojciech Karpiuk, Rafał Smolec
Adv. Sci. Technol. Res. J. 2024; 18(4):369-385
DOI: https://doi.org/10.12913/22998624/189636
 

Reloading Modulus Estimation Based on Static and Dynamic Plate Load Tests Carried out on Unpaved Forest Roads
Michał Pawłowski, Sylwester M. Grajewski, Szymon Węgliński
Adv. Sci. Technol. Res. J. 2024; 18(4):250-264
DOI: https://doi.org/10.12913/22998624/189403
 

Mathematical Evaluation of Passenger and Freight Rail Transport as Viewed Through the COVID-19 Pandemic and the War in Ukraine Situation
Anna Borucka, Edward Kozłowski
Adv. Sci. Technol. Res. J. 2024; 18(4):238-249
DOI: https://doi.org/10.12913/22998624/188503
 

Experimental Study on Wood-Adhesive-Steel-Bolts Hybrid Connections with Slotted-in Steel Plates
Bartosz Kawecki
Adv. Sci. Technol. Res. J. 2024; 18(4):76-88
DOI: https://doi.org/10.12913/22998624/188326
 

Analysis of the Influence of Fuel Dose on the Electrical Parameters of the Starting Process of a Single-Cylinder Diesel Engine
Jacek Caban, Jarosław Seńko, Tomasz Słowik, Szymon Dowkontt, Dorota Górnicka
Adv. Sci. Technol. Res. J. 2024; 18(4):55-65
DOI: https://doi.org/10.12913/22998624/188268
 

Impact of the Effort of a Reinforced Concrete Element on the Results of the Reinforcement Corrosion Risk Tested Using the Galvanostatic Pulse Method
Wioletta Raczkiewicz, Artur Robert Wójcicki
Adv. Sci. Technol. Res. J. 2024; 18(4):33-41
DOI: https://doi.org/10.12913/22998624/188084
 

Modeling and Performance Analysis of Hydrogen Powered Hybrid Bike
Manoj Kumar Gurunathan, Navasingh Rajesh Jesudoss Hynes, Marian Bartoszuk, Angela J. Sujana, Omar Ali Al-Khashman
Adv. Sci. Technol. Res. J. 2024; 18(3):360-368
DOI: https://doi.org/10.12913/22998624/186528
 

Effect of Surface Hydrophobization on the Durability of Concrete with Cement Kiln Dust
Małgorzata Grzegorczyk-Frańczak, Wojciech Andrzejuk, Robert Hunek, Grzegorz Łagód
Adv. Sci. Technol. Res. J. 2024; 18(3):214-233
DOI: https://doi.org/10.12913/22998624/186212
 

Enhanced Concrete Performance and Sustainability with Fly Ash and Ground Granulated Blast Furnace Slag – A Comprehensive Experimental Study
Rajasekhar Cheruvu, Burugupalli Kameswara Rao
Adv. Sci. Technol. Res. J. 2024; 18(3):161-174
DOI: https://doi.org/10.12913/22998624/186192
 

Open Source Intelligence Opportunities and Challenges – A Review
Sabina Szymoniak, Kacper Foks
Adv. Sci. Technol. Res. J. 2024; 18(3):123-139
DOI: https://doi.org/10.12913/22998624/186036
 

Analysis of the Modernised Railway Vehicle Component with Regard to Reliability and Operational Safety
Stanisław Młynarski, Robert Pilch, Maksymilian Smolnik, Jan Szybka
Adv. Sci. Technol. Res. J. 2024; 18(3):21-32
DOI: https://doi.org/10.12913/22998624/185438
 

Management of the Special Processes – An Experimental Study of Bent Reinforced Concrete Beams
Dorota Michałowska-Maziejuk, Dorota Klimecka-Tatar, Manuela Ingaldi, Bożena Kaczmarska, Agnieszka Czajkowska
Adv. Sci. Technol. Res. J. 2024; 18(2):248-265
DOI: https://doi.org/10.12913/22998624/184195
 

Damages of the Section Insulator Guide Caused by Electric Arc
Jarosław Jozef Konieczny, Krzysztof Labisz
Adv. Sci. Technol. Res. J. 2024; 18(2):214-225
DOI: https://doi.org/10.12913/22998624/184091
 

Improves the Brake Working of the Rescue Winch to Control the Stop Brake Process
Truong Giang Duong, Van Tinh Nguyen
Adv. Sci. Technol. Res. J. 2024; 18(1):255-267
DOI: https://doi.org/10.12913/22998624/177662
 

Performance and Emission of the Aircraft with Hybrid Propulsion During Take-Off Operation Cycle
Małgorzata Pawlak, Michał Kuźniar
Adv. Sci. Technol. Res. J. 2024; 18(1):155-166
DOI: https://doi.org/10.12913/22998624/177254
 

Computational Methods of the Identification of Chaboche Isotropic-Kinematic Hardening Model Parameters Derived from the Cyclic Loading Tests
Marta Wójcik, Andrzej Gontarz, Andrzej Skrzat, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2024; 18(1):61-75
DOI: https://doi.org/10.12913/22998624/175930
 

Accelerations Caused by Underwater Explosions on the Naval Gun Foundation
Bogdan Szturomski, Radosław Kiciński, Stanisław Milewski
Adv. Sci. Technol. Res. J. 2024; 18(1):129-141
DOI: https://doi.org/10.12913/22998624/174846
 

Toxic Emission During Road Tests of Urban Bus
Paweł Magryta, Łukasz Grabowski, Grzegorz Barański, Mirosław Wendeker
Adv. Sci. Technol. Res. J. 2023; 17(6):16-26
DOI: https://doi.org/10.12913/22998624/172413
 

Impact of an Electric Locomotive on a Perfectly Smooth Railway Track in Terms of Rail Corrugation Formation
Jan Matej, Piotr Orliński
Adv. Sci. Technol. Res. J. 2023; 17(5):77-88
DOI: https://doi.org/10.12913/22998624/171387
 

Analysis of the Impact of Using CFRP Tapes on the Performance of Bent Thin-Walled Beams Connected with a Sandwich Panel – Pilot Studies
Ilona Szewczak
Adv. Sci. Technol. Res. J. 2023; 17(4):282-289
DOI: https://doi.org/10.12913/22998624/170255
 

Bending Moment Control and Weight Optimization in Space Structures by Adding Extra Members in the Optimal Locations
Ahmed Manguri, Najmadeen Saeed, Marcin Szczepanski, Robert Jankowski
Adv. Sci. Technol. Res. J. 2023; 17(4):313-324
DOI: https://doi.org/10.12913/22998624/169573
 

Experimental and Theoretical Investigation of Galvanized Steel and Fiber-Reinforced Polymer Composites Textile Adhesive Double Lap Joints
Maciej Adam Dybizbański, Katarzyna Rzeszut
Adv. Sci. Technol. Res. J. 2023; 17(4):110-120
DOI: https://doi.org/10.12913/22998624/169343
 

Assessment of Removal of Fines from Reclaimed Asphalt Binder Using Fourier Transform Infrared Spectroscopy
Pranoti Deepak Dare, Namdeo Hedaoo
Adv. Sci. Technol. Res. J. 2023; 17(4):79-88
DOI: https://doi.org/10.12913/22998624/169059
 

Performance Comparison of Four-Stroke Diesel Engine Fuelled by Various Biodiesel Blends and Diesel
Samer As’ad, Sameh Alsaqoor, Mamdoh Abdel Alaziz Al-Busoul, M. Abu-Zaid, Magdalena Joka-Yilidz, Gabriel Borowski, Mustafa Awwad Al-Khawaldeh
Adv. Sci. Technol. Res. J. 2023; 17(4):46-52
DOI: https://doi.org/10.12913/22998624/168257
 

Application of Laboratory Tests in Numerical Analysis for Exhaust Emissions in Business Jet Engines
Adam Kozakiewicz, Aleksandra Kołodziejska, Rafał Kieszek
Adv. Sci. Technol. Res. J. 2023; 17(4):21-35
DOI: https://doi.org/10.12913/22998624/167456
 

A Potential Environmental Sustainability of Wood Ash in Normal and Geopolymer Concrete – A Review
Muhammad Nura Isa, Hanizam Awang, Khairunisa Muthusamy
Adv. Sci. Technol. Res. J. 2023; 17(4):1-20
DOI: https://doi.org/10.12913/22998624/167407
 

On a Possibility of a Side Impact Collision Analysis
Jerzy Kisilowski, Jarosław Zalewski, Rafał Kowalik
Adv. Sci. Technol. Res. J. 2023; 17(3):257-268
DOI: https://doi.org/10.12913/22998624/166567
 

Multidimensional Analysis of Air Pollution Measurements Concentration with PM10 and PM2.5 on the Campus of the Bialystok University of Technology
Ewa Szatyłowicz, Gökçe Edizsoy, Oyanur Öztürk, İclal Yanaşık, Emilia Siemiończyk, Iwona Skoczko, Adam Tabor
Adv. Sci. Technol. Res. J. 2023; 17(3):226-235
DOI: https://doi.org/10.12913/22998624/166384
 

Influence of the Quality of Metal Sheet Edges After Strip Slitting Processes in Integrated Lines on the Quality of Laser Welds
Marcin Stańczyk
Adv. Sci. Technol. Res. J. 2023; 17(2):136-146
DOI: https://doi.org/10.12913/22998624/161239
 

The Computational Method of Predicting the Crack Path in Confrontation with Laboratory Tests
Jakub Gontarz, Jerzy Podgórski
Adv. Sci. Technol. Res. J. 2023; 17(2):90-110
DOI: https://doi.org/10.12913/22998624/161007
 

The Possibility of Using Sewage Sludge Pellets as Thermal Insulation
Piotr Kosiński, Bartosz Kask, Małgorzata Franus, Magdalena Piłat-Rożek, Joanna Szulżyk-Cieplak, Grzegorz Łagód
Adv. Sci. Technol. Res. J. 2023; 17(2):161-172
DOI: https://doi.org/10.12913/22998624/159724
 

Numerical Modelling and Experimental Testing on Polyurethane Adhesively Bonded Joints Behaviour in Wood-Wood and Wood-Carbon Fibre Reinforced Polymer Layouts
Bartosz Kawecki
Adv. Sci. Technol. Res. J. 2023; 17(2):36-52
DOI: https://doi.org/10.12913/22998624/159723
 

Modification of Concrete Surface with Higher Fatty Acids
Danuta Barnat-Hunek, Wojciech Andrzejuk, Małgorzata Szafraniec, Magdalena Kachel, Robert Hunek
Adv. Sci. Technol. Res. J. 2023; 17(2):307-321
DOI: https://doi.org/10.12913/22998624/159722
 

Oxidative Aging Characterization of Pyro-Oil Modified Binders Using Fourier Transform Infrared Spectroscopy
Nikita Taran Bhagat, Hemantkumar Prakash Hadole, Mahadeo Sambhaji Ranadive
Adv. Sci. Technol. Res. J. 2023; 17(1):140-149
DOI: https://doi.org/10.12913/22998624/159056
 

Research on an Innovative FLEX Bicycle Frame with a Softtail Vibration Damping System
Łukasz Kuczek, Paweł Marczak, Wacław Muzykiewicz, Marcin Mroczkowski, Paweł Paćko, Dawid Drop
Adv. Sci. Technol. Res. J. 2023; 17(1):290-303
DOI: https://doi.org/10.12913/22998624/159041
 

Testing of Technical Fabrics under Fast Camera Control
Paweł Kłosowski, Krystyna Michałowska, Marek Przyborski, Wojciech Jurczak
Adv. Sci. Technol. Res. J. 2023; 17(1):332-344
DOI: https://doi.org/10.12913/22998624/158883
 

Application of Plasma Actuator with Two Mesh Electrodes to Active Control of Boundary Layer at 50 Hz Power Supply
Ernest Gnapowski, Jarosław Pytka, Sebastian Gnapowski, Jerzy Józwik, Paweł Tomiło
Adv. Sci. Technol. Res. J. 2023; 17(1):58-63
DOI: https://doi.org/10.12913/22998624/157207
 

Establishing Emergency Sections on Land Roads in Order to Improve the Quality of Transport Services, Creating Comfortable Conditions for International and Local Traffic
Jurijus Zaranka, Jonas Matijosius, Urte Radvilaite, Jacek Caban, Agnieszka Dudziak
Adv. Sci. Technol. Res. J. 2023; 17(1):75-85
DOI: https://doi.org/10.12913/22998624/157108
 

Usage of Cold Forcing Method for a Gas Turbine Engine of Supersonic Transport
Viktors Gutakovskis, Vladimirs Gudakovskis, Ilmars Blumbergs, Elina Sarma
Adv. Sci. Technol. Res. J. 2023; 17(1):267-273
DOI: https://doi.org/10.12913/22998624/156985
 

Test Results of the Modulus of Elasticity of Concretes with Various Coarse Aggregates and Standard Recommendations
Jacek Góra, Wojciech Piasta
Adv. Sci. Technol. Res. J. 2022; 16(6):232-243
DOI: https://doi.org/10.12913/22998624/156583
 

Parametric Studies on Structural Behaviour of Strengthened Beams Using Glass Fiber Reinforced Plastic
Er. Akshay D. Barkale, Sunil B. Thakare
Adv. Sci. Technol. Res. J. 2022; 16(6):192-197
DOI: https://doi.org/10.12913/22998624/156336
 

Carbon Fibre Reinforced Polymer Fatigue Strengthening of Old Steel Material
Maciej Kowal, Daniel Pietras
Adv. Sci. Technol. Res. J. 2023; 17(1):197-209
DOI: https://doi.org/10.12913/22998624/156216
 

Using Minimum Actuators to Control Shape and Stress of a Double Layer Spherical Model Under Gravity and Lateral Loadings
Najmadeen Saeed, Javad Katebi, Ahmed Manguri, Aram Mahmood, Marcin Szczepanski, Robert Jankowski
Adv. Sci. Technol. Res. J. 2022; 16(6):1-13
DOI: https://doi.org/10.12913/22998624/155214
 

Dynamic Processes Modeling in a Peristaltic Pump with a Hydraulic Drive for the Bingham Fluid
Olha Dvirna, Vladimir Shatokhin, Yaroslav Ivanchuk, Natalia Veselovskaya, Wojciech Jurczak
Adv. Sci. Technol. Res. J. 2022; 16(4):256-269
DOI: https://doi.org/10.12913/22998624/152944
 

The Study of Geometry of the Selected Transition Curves in the Design of Circular Roads
Agata Basak
Adv. Sci. Technol. Res. J. 2022; 16(4):270-278
DOI: https://doi.org/10.12913/22998624/152936
 

The Concept of Three-Dimensional Visualisation of Urbanised Areas for a 3D Real Property Register in Poland
Przemysław Leń, Klaudia Maciąg, Michał Maciąg, Monika Mika, Justyna Wójcik-Leń
Adv. Sci. Technol. Res. J. 2022; 16(4):298-308
DOI: https://doi.org/10.12913/22998624/152935
 

Evaluation the Effect of Adding Oil Shale Ash on the Compressive Strength of Concrete
Mousa Gougazeh
Adv. Sci. Technol. Res. J. 2022; 16(4):130-137
DOI: https://doi.org/10.12913/22998624/152455
 

Effect of Nanofillers on the Mechanical Properties of Vinyl Ester Resin Used as a Carbon Fiber Reinforced Polymer Matrix
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Krzysztof Ochałek, Katarzyna Burnat
Adv. Sci. Technol. Res. J. 2022; 16(4):10-21
DOI: https://doi.org/10.12913/22998624/152053
 

Indication of the Target Alternative Fuel for Shipping
Jerzy Herdzik
Adv. Sci. Technol. Res. J. 2022; 16(4):48-55
DOI: https://doi.org/10.12913/22998624/151757
 

Stress Analysis of Steel Beams Made of Sigma Cross-Section
Maciej Adam Dybizbański, Katarzyna Rzeszut, Aleksandra Szczepańska
Adv. Sci. Technol. Res. J. 2022; 16(4):106-118
DOI: https://doi.org/10.12913/22998624/151535
 

Bamboo as a Construction Material: Prospects and Challenges
Muhammad Fahim, Muhammad Haris, Wajid Khan, Saeed Zaman
Adv. Sci. Technol. Res. J. 2022; 16(3):165-175
DOI: https://doi.org/10.12913/22998624/149737
 

Possibilities for Improving the Cooling Systems of IC Engines of Marine Power Plants
Yuryi Moshentsev, Oleksiy Gogorenko, Olha Dvirna
Adv. Sci. Technol. Res. J. 2022; 16(3):183-192
DOI: https://doi.org/10.12913/22998624/149658
 

Evaluating a Proposed Urban Transportation System Using Advance Transport and Land-Use Modelling Framework
Raymond Akuh, Ming Zhong, Asif Raza
Adv. Sci. Technol. Res. J. 2022; 16(3):234-244
DOI: https://doi.org/10.12913/22998624/149607
 

The Potential of Sisal Fibre as an Additive in Lightweight Foamed Concrete for Thermal Properties Enhancement
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(3):89-97
DOI: https://doi.org/10.12913/22998624/149213
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top