Topic Machinery, technology and equipment
Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 2. Angular Correction of the Gear Profile
Adv. Sci. Technol. Res. J. 2019; 13(2):1–6
CFD study of the Effect of Piston Crevice Volume on the Temperature Distribution in a Rapid Compression Machine
Adv. Sci. Technol. Res. J. 2019; 13(1):46–51
Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Adv. Sci. Technol. Res. J. 2019; 13(1):29–36
Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 1. Height Correction of the Gear Profile
Adv. Sci. Technol. Res. J. 2019; 13(1):52–59
Comparative Aspects of Nanoparticles in Relation to Extending Shelf-Life of Molds
Adv. Sci. Technol. Res. J. 2019; 13(1):110–115
Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Adv. Sci. Technol. Res. J. 2018; 12(4):207–215
Conveyor Failure Diagnostics Using Sound Visualization Technique
Adv. Sci. Technol. Res. J. 2018; 12(4):144–150
Experience of the Crane Steel Wire Ropes Non-Destructive Tests
Adv. Sci. Technol. Res. J. 2018; 12(4):157–163
Analysis and Classification of Noise Sources of Conveyor Systems by Sound Visualizing on the Postal Package Sorting Line
Adv. Sci. Technol. Res. J. 2018; 12(4):172–176
The Effect of Valley Location in Two-Process Surface Topography Analysis
Adv. Sci. Technol. Res. J. 2018; 12(4):97–102
An Impact of Technological Conditions on Surface Burning in Grinding of the Orbit
Adv. Sci. Technol. Res. J. 2018; 12(4):19–27
THE INFLUENCE OF AUXILARY SUPPLEMENTS ADDED IN THE EXTRUSION PROCESS TO REDUCE THE FRICTION OF A POLYMERIC FOIL
Adv. Sci. Technol. Res. J. 2018; 12(3):250–256
INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Adv. Sci. Technol. Res. J. 2018; 12(3):242–249
RESEARCH OF POLYMERIC EXTRUDATE WITH SEGMENT-WALL CONSTRUCTION
Adv. Sci. Technol. Res. J. 2018; 12(3):216–222
OBJECTIVE AND SUBJECTIVE EVALUATION OF THE RISK PHYSICAL FACTORS NEAR TO CONVEYOR SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(3):188–196
OPTIMIZATION OF MANIPULATION LOGISTICS USING DATA MATRIX CODES
Adv. Sci. Technol. Res. J. 2018; 12(3):173–180
NANOSECOND YB FIBRE LASER MILLING OF ALLUMINIUM BRONZE: EFFECT OF PROCESS PARAMETERS ON THE SURFACE FINISH
Adv. Sci. Technol. Res. J. 2018; 12(3):10–15
INFLUENCE OF PARAMETERS OF MILLING PROCESS ON THE ENERGY CONSUMPTION OF THE MACHINE TOOL
Wojciech Borkowski, Wacław Skoczyński, Paweł Piórkowski, Tomasz Jankowski, Andrzej Roszkowski, Michał Foremniak
Adv. Sci. Technol. Res. J. 2018; 12(3):24–31
DRAFT JIG STRUCTURE DESIGN FOR MEASURING DEFORMATION OF THIN-WALLED ROBOTIC OR CONVEYOR COMPONENTS
Adv. Sci. Technol. Res. J. 2018; 12(3):55–60
NUMERICAL MODELED STATIC STRESS-DEFORMED STATE OF PARALLEL PIPES IN THE DEFORMABLE ENVIRONMENT
Adv. Sci. Technol. Res. J. 2018; 12(3):114–125
QUANTIFICATION OF ROAD VEHICLE PERFORMANCE PARAMETERS UNDER LABORATORY CONDITIONS
Adv. Sci. Technol. Res. J. 2018; 12(3):16–23
RESEARCH OF COMPOSITE MATERIALS USED IN THE CONSTRUCTION OF VEHICLE BODYWORK
Adv. Sci. Technol. Res. J. 2018; 12(3):181–187
PROPOSAL OF CONTENT MAINTENANCE OF CNC MACHINE USING METHODS RELIABILITY CENTERED MAINTENANCE
Adv. Sci. Technol. Res. J. 2018; 12(3):126–133
RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(2):274–290
ASSESSMENT OF THE POSSIBILITY OF USING AN UNMANNED AIRCRAFT CLASS MINI TO ILLUMINATE TARGETS BY LASER
Adv. Sci. Technol. Res. J. 2018; 12(2):106–111
DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Adv. Sci. Technol. Res. J. 2018; 12(2):170–179
THE ANALYSIS OF THE TRAFFIC SIGNS VISIBILITY DURING NIGHT DRIVING
Adv. Sci. Technol. Res. J. 2018; 12(2):71–76
EVALUATION CRITERIA OF THE BELT CONVEYOR USING THE AHP METHOD AND SELECTION THE RIGHT CONVEYOR BY HURWITZ METHOD
Adv. Sci. Technol. Res. J. 2018; 12(2):137–143
ANALYSIS OF POSSIBILITIES TO IMPROVE ENVIRONMENTAL OPERATING PARAMETERS OF MODERN COMPRESSION – IGNITION ENGINES
Adv. Sci. Technol. Res. J. 2018; 12(2):206–213
MEASURING OF MECHANICAL RESISTANCES OF A HEAVY GOOD VEHICLE BY COASTDOWN TEST
Adv. Sci. Technol. Res. J. 2018; 12(2):214–221
MODELING OF SELECTED DESIGN CHARACTERISTICS OF CAM AND HYPOCYCLOIDAL DRIVES OF HIGH-PRESSURE FUEL PUMPS
Adv. Sci. Technol. Res. J. 2018; 12(2):128–136
EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adv. Sci. Technol. Res. J. 2018; 12(2):42–51
GRADIENT COMPOSITE COATINGS FOR WORKING SURFACES OF BRAKING DEVICES
Adv. Sci. Technol. Res. J. 2018; 12(2):1–5
Assessment of the Manufacturing Possibility of Thin-Walled Robotic Portals for Conveyor Worklace
Adv. Sci. Technol. Res. J. 2018; 12(1):338–345
Device Designed for Detection and Setting the Required Tensile Force in Ropes
Adv. Sci. Technol. Res. J. 2018; 12(1):200–206
Influence and Optimization of the Setting of Input Parameters of Laser Profilometry by the Surface Measurement Manufactured by the AWJ Technology
Adv. Sci. Technol. Res. J. 2018; 12(1):329–337
Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Adv. Sci. Technol. Res. J. 2018; 12(1):236–243
Comparison of Conventional and Hybrid Cars Exploitation Costs
Adv. Sci. Technol. Res. J. 2018; 12(1):221–227
Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Adv. Sci. Technol. Res. J. 2018; 12(1):135–141
Possibility of Increasing Vehicle Energy Balance Using Coasting
Adv. Sci. Technol. Res. J. 2018; 12(1):228–235
Application of MCDA in Selection of Different Mining Methods and Solutions
Adv. Sci. Technol. Res. J. 2018; 12(1):171–180
Assessment of the Possibility of Applying Ceramic Materials in Common Rail Injection Systems
Adv. Sci. Technol. Res. J. 2018; 12(1):312–321
The Influence of the Tool Surface Texture on Friction and the Surface Layers Properties of Formed Component
Adv. Sci. Technol. Res. J. 2018; 12(1):181–193
Design and Modelling of a Light Duty Trencher for Local Conditions
Adv. Sci. Technol. Res. J. 2018; 12(1):303–311
A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication and Minimum Quantity Lubrication
Adv. Sci. Technol. Res. J. 2018; 12(1):99–105
Analysis of the Effect of Wire Electric Dischage Machining Process Parameters for the Formation of High Speed Steel Form Tool
Adv. Sci. Technol. Res. J. 2018; 12(1):89–98
Acceptance and Reverification of CMM in Industrial Conditions
Adv. Sci. Technol. Res. J. 2018; 12(1):80–88
The Effects of Vehicle Load on Driving Characteristics
Adv. Sci. Technol. Res. J. 2018; 12(1):142–149
The Effect of Plunge Depth on the Strength Properties of Friction Welded Joints Using the RFSSW Method
Adv. Sci. Technol. Res. J. 2018; 12(1):41–47
Finite Elements Strenght Analysis of a Compressor Consisting of Four Helical Rotors
Adv. Sci. Technol. Res. J. 2018; 12(1):1–8
Utilisation of Kinect Sensors for the Design of a Human-Robot Collaborative Workcell
Adv. Sci. Technol. Res. J. 2017; 11(4):270–278
Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
Adv. Sci. Technol. Res. J. 2017; 11(4):286–293
Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76–82
Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
Adv. Sci. Technol. Res. J. 2017; 11(4):305–310
Influence of Polylactide Modification with Blowing Agents on Selected Mechanical Properties
Adv. Sci. Technol. Res. J. 2017; 11(4):206–214
Possibilities of Belzona Adhesive Joints Application for Austenitic Steel Used in Ship Constructions
Adv. Sci. Technol. Res. J. 2017; 11(4):134–140
The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Adv. Sci. Technol. Res. J. 2017; 11(4):260–269
The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Adv. Sci. Technol. Res. J. 2017; 11(4):198–205
Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Adv. Sci. Technol. Res. J. 2017; 11(4):159–167
Electrochemical Grinding of Titanium-Containing Materials
Adv. Sci. Technol. Res. J. 2017; 11(4):183–188
Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Adv. Sci. Technol. Res. J. 2017; 11(4):97–102
Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Adv. Sci. Technol. Res. J. 2017; 11(4):83–96
Peg-on-Hole: Fundamental Principles of Motion of a Peg Leaning on a Horizontal Hole Edge
Adv. Sci. Technol. Res. J. 2017; 11(4):49–59
Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Adv. Sci. Technol. Res. J. 2017; 11(4):111–122
Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft
Adv. Sci. Technol. Res. J. 2017; 11(4):60–67
The Effect of Selected Conditions in a Thermoforming Process on Wall Thickness Variations
Adv. Sci. Technol. Res. J. 2017; 11(4):41–48
Impact of the Technological Conditions of Plane Surface Machining on a Triangular Milling Cutter on the Residual Hysteresis of the Movement Axis of the Machine
Adv. Sci. Technol. Res. J. 2017; 11(3):240–245
Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints
Adv. Sci. Technol. Res. J. 2017; 11(3):270–276
Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Adv. Sci. Technol. Res. J. 2017; 11(3):204–210
Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Adv. Sci. Technol. Res. J. 2017; 11(3):246–252
An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Adv. Sci. Technol. Res. J. 2017; 11(3):223–232
Proposal of the Sound Insulating Measures for Vibrational Sorter and Verification of the Effectiveness Measures
Adv. Sci. Technol. Res. J. 2017; 11(3):196–203
The Use of Lean Manufacturing Techniques – SMED Analysis to Optimization of the Production Process
Adv. Sci. Technol. Res. J. 2017; 11(3):187–195
Variable Valve Timing Scheduling in a 4-Stroke Internal Combustion Cylinder Utilizing Artificial Neural Networks
Adv. Sci. Technol. Res. J. 2017; 11(3):114–121
Modeling of Thermal Cycle CI Engine with Multi-Stage Fuel Injection
Arkadiusz Jamrozik, Wojciech Tutak, Adam Gnatowski, Renata Gnatowska, Jerzy Winczek, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2017; 11(3):179–186
Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Adv. Sci. Technol. Res. J. 2017; 11(3):150–163
Local Resistance of Heating Molybdenum Sheet in a Test Device
Adv. Sci. Technol. Res. J. 2017; 11(3):87–93
Analysis of Fiber Orientation in the Wood-Polymer Composites (WPC) on Selected Examples
Adv. Sci. Technol. Res. J. 2017; 11(3):122–129
An Experimental Study on Wall Thickness Distribution in Thermoforming
Adv. Sci. Technol. Res. J. 2017; 11(3):139–142
THE STUDY OF THE SURFACE QUALITY OF THE THIN WALL BEARING UNITS TO ROLLS ROLLER SEATS PIPE CONVEYOR
Adv. Sci. Technol. Res. J. 2017; 11(2):192–197
CNC MILLING MACHINE PRECISION ANALYSIS THROUGH NUMERICAL MODELLING
Adv. Sci. Technol. Res. J. 2017; 11(2):212–219
NECESSITY OF WIRE ROPE REPLACEMENT IN CRANE LIFTING EQUIPMENT AFTER CHANGE OF CRANE OPERATIONAL PARAMETERS
Adv. Sci. Technol. Res. J. 2017; 11(2):226–230
THE EFFECT OF PROCESS PARAMETERS ON THICKNESS DISTRIBUTION IN THERMOFORMING
Adv. Sci. Technol. Res. J. 2017; 11(2):198–204
MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES
Adv. Sci. Technol. Res. J. 2017; 11(2):166–171
A PRESSURE-BUBBLE VACUUM FORMING PROCESS FOR POLYSTYRENE SHEET
Adv. Sci. Technol. Res. J. 2017; 11(2):180–186
INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Adv. Sci. Technol. Res. J. 2017; 11(2):159–165
DEDICATED EXHAUST GAS RECIRCULATION IN SPARK IGNITION ENGINES
Adv. Sci. Technol. Res. J. 2017; 11(2):44–50
KINEMATIC SYNTHESIS OF LINKAGE MECHANISMS USING BURMESTER POINTS AT THE GIVEN DWELL DURATION OF THE OUTPUT LINK
Adv. Sci. Technol. Res. J. 2017; 11(2):139–145
THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS
Anna Rudawska, Katarzyna Głogowska, Tetiana Vitenko, Dana Stančeková, Nadežda Čuboňová, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2017; 11(2):8–16
MONITORING OF CUTTING CONDITIONS WITH THE EMPIRICAL MODE DECOMPOSITION
Adv. Sci. Technol. Res. J. 2017; 11(1):96–103
SAVITZKY-GOLAY METHOD FOR THE EVALUATION OF DECELERATION OF THE FIRCTION LIFT
Adv. Sci. Technol. Res. J. 2017; 11(1):138–146
INFLUENCE OF SELECTED CUTTING CONDITIONS ON CUTTING FORCES
Adv. Sci. Technol. Res. J. 2017; 11(1):179–185
EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45
Adv. Sci. Technol. Res. J. 2017; 11(1):173–178
REDUCING ENERGY CONSUMPTION BY PASSENGER CAR WITH USING OF NON-ELECTRICAL HYBRID DRIVE TECHNOLOGY
Adv. Sci. Technol. Res. J. 2017; 11(1):166–172
WORKSHOP PROGRAMMING AS PART OF TECHNOLOGICAL PREPARATION OF PRODUCTION
Adv. Sci. Technol. Res. J. 2017; 11(1):111–116
INFLUENCE OF THE HOMOGENIZATION TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF AlSi10CuNiMgMn ALLOY
Adv. Sci. Technol. Res. J. 2017; 11(1):104–110
INFLUENCE OF THE PATH TYPE ON SELECTED TECHNOLOGICAL EFFECTS IN THE TROCHOIDAL MILLING
Adv. Sci. Technol. Res. J. 2017; 11(1):147–153
DETERMINATION OF RESIDUAL STRESS DISTRIBUTION IN HIGH STRENGTH ALUMINUM ALLOY AFTER EDM
Adv. Sci. Technol. Res. J. 2017; 11(1):29–35
THE CHARACTERISTICS OF THE OPERATING PARAMETERS OF THE VERTICAL AXIS WIND TURBINE FOR THE SELECTED WIND SPEED
Adv. Sci. Technol. Res. J. 2017; 11(1):58–65
MICROSTRUCTURAL STUDY OF FAILURE PHENOMENA IN WC 94%-Co 6% HARD METAL ALLOY TIPS OF RADIAL PICKS
Sakuntala Nahak, Somnath Chattopadhyaya, Saurabh Dewangan, Sergej Hloch, Grzegorz Krolczyk, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2017; 11(1):36–47
INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511
Adv. Sci. Technol. Res. J. 2016; 10(32):86–96
THEORETICAL AND EXPERIMENTAL ANALYSIS OF ROTARY COMPRESSION OF BALL PINS HOLLOW FORGINGS
Adv. Sci. Technol. Res. J. 2016; 10(32):109–117
INCREASING METROLOGICAL AUTONOMY OF IN-PLANT MEASURING SYSTEMS
Adv. Sci. Technol. Res. J. 2016; 10(32):193–197
NUMERICAL MODELING OF SKEW ROLLING PROCESS OF TWIST DRILLS
Adv. Sci. Technol. Res. J. 2016; 10(32):124–131
VISCOUS AND MAGNETIC FORCE ACTING IN A HIGH SPEED SOLENOID VALVE
Adv. Sci. Technol. Res. J. 2016; 10(32):132–143
A MATHEMATICAL MODEL OF CHP 2000 TYPE PROGRESSIVE GEAR
Adv. Sci. Technol. Res. J. 2016; 10(32):150–155
THE RESEARCH ON AGEING OF GLYCOL-BASED BRAKE FLUIDS OF VEHICLES IN OPERATION
Jacek Caban, Paweł Droździel, Ján Vrábel, Branislav Šarkan, Andrzej Marczuk, Laszek Krzywonos, Iwona Rybicka
Adv. Sci. Technol. Res. J. 2016; 10(32):9–16
APPLICATION OF CHEMICAL PRE-TREATMENT ON THE POLISHED SURFACE OF ALUMINIUM ALLOYS
Adv. Sci. Technol. Res. J. 2016; 10(32):17–23
APPLICABILITY OF SELECTED GROUPS OF ROUGHNESS PARAMETERS FOR DESCRIPTION OF SURFACE LAYER OF FLAT - TOP “PLATEAU” STRUCTURES
Adv. Sci. Technol. Res. J. 2016; 10(32):32–39
USING OF NON-CONVENTIONAL FUELS IN HYBRID VEHICLE DRIVES
Adv. Sci. Technol. Res. J. 2016; 10(32):240–247
THE ISSUE OF DETERMINING THE GEOMETRIC POSITION DEVIATION OF THE THREADED HOLES
Adv. Sci. Technol. Res. J. 2016; 10(32):47–52
INFLUENCE OF THE THICKNESS OF Ni-P COATING APPLIED ON 7075 ALUMINUM ALLOY ON ITS HARDNESS
Kazimierz Czapczyk, Piotr Siwak, Piotr Jabłoński, Łukasz Furmański, Paweł Grobelny, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2016; 10(32):53–58
ANALYTICAL INTELLIGENCE TOOLS FOR MULTICRITERIAL DIAGNOSTICS OF CNC MACHINES
Adv. Sci. Technol. Res. J. 2016; 10(32):59–64
MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
Adv. Sci. Technol. Res. J. 2016; 10(31):144–150
TASKRADAR: TASK VISUALISATION AND MONITORING WITHIN AUTOMOTIVE PRODUCT DEVELOPMENT LIFECYCLE USING SEMANTIC TECHNOLOGIES
Adv. Sci. Technol. Res. J. 2016; 10(31):124–129
SYNTHESIS OF A PUMPING UNIT WITH CONSIDERATION OF A FLEXIBLE MEMBER IN THE SYSTEM
Adv. Sci. Technol. Res. J. 2016; 10(31):119–123
THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Adv. Sci. Technol. Res. J. 2016; 10(31):109–118
ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES
Adv. Sci. Technol. Res. J. 2016; 10(31):87–93
ANALYSIS OF THE PRE-ROTATION ENGINE LOADS IN THE AUTOGYRO
Adv. Sci. Technol. Res. J. 2016; 10(31):169–176
NORMATIVE MEASUREMENTS OF NOISE AT CNC MACHINES WORK STATIONS
Adv. Sci. Technol. Res. J. 2016; 10(30):138–143
IDENTIFICATION AND MONITORING OF NOISE SOURCES OF CNC MACHINE TOOLS BY ACOUSTIC HOLOGRAPHY METHODS
Adv. Sci. Technol. Res. J. 2016; 10(30):127–137
SELECTION OF REFERENCE PLANE BY THE LEAST SQUARES FITTING METHODS
Adv. Sci. Technol. Res. J. 2016; 10(30):164–175
THEORETICAL AND EXPERIMENTAL ANALYSIS OF LOADING IMPACT FROM THE PROGRESSIVE GEAR ON THE LIFT BRAKING DISTANCE WITH THE USE OF THE FREE FALL METHOD
Adv. Sci. Technol. Res. J. 2016; 10(30):103–109
ANALYSIS OF VIBROACOUSTIC SIGNALS RECORDED IN THE PASSENGER LIFT CABIN
Adv. Sci. Technol. Res. J. 2016; 10(30):193–201
TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS
Adv. Sci. Technol. Res. J. 2016; 10(30):182–192
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.