Topic Production Engineering and Management
Increasing Competitiveness Through Innovation in an Industrial Enterprise – A Case Study of the Company Massag
Adv. Sci. Technol. Res. J. 2021; 15(1):110–125
Modern Reverse Engineering Methods Used to Modification of Jewelry
Adv. Sci. Technol. Res. J. 2020; 14(4):298–306
Influence of the Length of Components From Polymer Composite on Selected Machinability Indicators in the Circumferential Milling Process
Adv. Sci. Technol. Res. J. 2020; 14(4):229–239
Selection of the Technological Ceramic Layer Thickness in an HPDC Machine Plunger in the Aspect of its Strength
Adv. Sci. Technol. Res. J. 2020; 14(4):11–20
Application of the Bloch-Schmigalla Method to Optimize the Organization of the Process of Repairing Unmanned Ground Vehicles
Adv. Sci. Technol. Res. J. 2020; 14(3):39–48
Technological and Economic Analysis of Logistic Activities in Interior Parts Manufacturing
Adv. Sci. Technol. Res. J. 2020; 14(3):204–212
A Computational Algorithm for Path Interval Determination in Multi-Axis Filleted End Milling
Adv. Sci. Technol. Res. J. 2020; 14(2):198–205
Mechanical and Thermal Stresses in an HPDC Machine Plunger During the Dosing and Filling Process
Adv. Sci. Technol. Res. J. 2020; 14(2):1–12
Mathematical Modeling of Material Erosion During the Electrical Discharge
Adv. Sci. Technol. Res. J. 2020; 14(2):27–33
Potential and Limits of Overall Equipment Effectiveness in the Total Productivity Management
Adv. Sci. Technol. Res. J. 2020; 14(2):19–26
Specific Cutting Conditions of 100Cr6 Steel Grinding and Selected Final Roughness Parameters
Adv. Sci. Technol. Res. J. 2020; 14(2):184–189
Use of the Dynamic Simulation to Reduce Handling Complexity in the Manufacturing Process
Adv. Sci. Technol. Res. J. 2020; 14(1):81–88
An Optimization Study for Bridge Design of a Porthole Extrusion Die
Adv. Sci. Technol. Res. J. 2019; 13(4):270–275
Assessment of Influence of Sample Averaging on Accuracy of Point Coordinates Measurement Performed Using Laser Tracking Systems
Adv. Sci. Technol. Res. J. 2019; 13(4):94–99
Strength of Joints with “Hi-Lok” Fasteners in Aircraft Safety Considerations
Adv. Sci. Technol. Res. J. 2019; 13(4):87–93
Analysis of the Influence of Support During Measurement Using Coordinate Measuring Techniques
Adv. Sci. Technol. Res. J. 2019; 13(4):22–29
Robust Diagnosis of a Proton Exchange Membrane Fuel Cell Using Bond Graph Methodlogy – Physical and Electrical Faults Detection and Isolation
Adv. Sci. Technol. Res. J. 2019; 13(4):194–203
Analysis of Temperatures in the Cold Storage of Finished Products
Adv. Sci. Technol. Res. J. 2019; 13(3):54–66
Influence of the Trochoidal Tool Path on Quality Surface of Groove Walls
Adv. Sci. Technol. Res. J. 2019; 13(3):38–42
Statistical Analyses of Productivity Model Parameters for Process Improvement
Adv. Sci. Technol. Res. J. 2019; 13(2):157–167
Routing of Vehicles From Depot in Two-Level Supply Chain with a Meta-Heuristic Algorithm
Adv. Sci. Technol. Res. J. 2019; 13(2):38–45
Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Adv. Sci. Technol. Res. J. 2019; 13(1):29–36
Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Adv. Sci. Technol. Res. J. 2018; 12(4):207–215
Effective Solutions to the Transport Distribution of Material by the Mayer Method
Adv. Sci. Technol. Res. J. 2018; 12(4):177–183
The Simulation of Conveyor Control System Using the Virtual Commissioning and Virtual Reality
Adv. Sci. Technol. Res. J. 2018; 12(4):164–171
Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups
Adv. Sci. Technol. Res. J. 2018; 12(4):28–34
Use of Simulation for Waste Management and Reverse Material Flow
Adv. Sci. Technol. Res. J. 2018; 12(4):136–143
Implementation of Innovative Methods for the Creation of Strategy Algorithms in CAD/CAM System Edgecam
Adv. Sci. Technol. Res. J. 2018; 12(4):10–18
INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Adv. Sci. Technol. Res. J. 2018; 12(3):242–249
RESEARCH OF POLYMERIC EXTRUDATE WITH SEGMENT-WALL CONSTRUCTION
Adv. Sci. Technol. Res. J. 2018; 12(3):216–222
OPTIMIZATION OF DOSING TANK EMPTYING USING SPIRAL VIBRATION
Adv. Sci. Technol. Res. J. 2018; 12(3):143–149
OPTIMIZATION OF MANIPULATION LOGISTICS USING DATA MATRIX CODES
Adv. Sci. Technol. Res. J. 2018; 12(3):173–180
ADAPTIVE OPTIMAL CONTROL OF ELECTRIC POWER SYSTEM OPERATION MODE ON THE BASE OF LEAST ACTION PRINCIPLE
Michalina Gryniewicz-Jaworska, Petro D. Lezhniuk, Volodymyr V. Kulyk, Volodymyr V. Netrebskiy, Yevhenii V. Duchkov
Adv. Sci. Technol. Res. J. 2018; 12(3):61–65
THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS
Adv. Sci. Technol. Res. J. 2018; 12(3):47–54
A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL
Adv. Sci. Technol. Res. J. 2018; 12(3):106–113
EFFECTS OF FORMING TOOLS AND PROCESS PARAMETERS ON SURFACE ROUGHNESS IN INCREMENTAL SHEET FORMING, A REVIEW
Adv. Sci. Technol. Res. J. 2018; 12(3):75–95
SELECTION OF AN APPROPRIATE DISTRIBUTION CHANNEL FOR HIGH-VALUE STONE
Adv. Sci. Technol. Res. J. 2018; 12(2):298–306
REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
Adv. Sci. Technol. Res. J. 2018; 12(2):244–251
ASSESSMENT OF THE ECONOMIC EFFICIENCY OF THE MODERNIZATION OF CRUSHED STONE MANUFACTURING PROCESS: CASE STUDY
Adv. Sci. Technol. Res. J. 2018; 12(2):237–243
RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(2):274–290
DETERMINATION OF CALIBRATION SPHERE PARAMETERS INFLUENCE ON THE RESULTS OF ARTICULATING PROBE HEAD QUALIFICATION
Adv. Sci. Technol. Res. J. 2018; 12(2):252–259
APPLICATION OF SUPPLY CHAIN MANAGEMENT IN CONSTRUCTION INDUSTRY
Adv. Sci. Technol. Res. J. 2018; 12(2):11–19
STUDY OF THE EFFECT OF THE ELECTROLESS Ni-P COATING THICKNESS APPLIED ON AW-7075 ALUMINUM ALLOY ON ITS MECHANICAL PROPERTIES
Adv. Sci. Technol. Res. J. 2018; 12(2):291–297
INCREASING EFFICIENCY OF FLEXIBLE MANUFACTURING SYSTEMS BASED ON COMPUTER PRODUCT GROUPING
Adv. Sci. Technol. Res. J. 2018; 12(2):6–10
EVALUATION CRITERIA OF THE BELT CONVEYOR USING THE AHP METHOD AND SELECTION THE RIGHT CONVEYOR BY HURWITZ METHOD
Adv. Sci. Technol. Res. J. 2018; 12(2):137–143
MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES
Adv. Sci. Technol. Res. J. 2018; 12(2):112–120
SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING
Adv. Sci. Technol. Res. J. 2018; 12(2):222–230
THE EFFECT OF RFSSW PARAMETERS ON THE LOAD BEARING CAPACITY OF ALUMINUM 7075-T6 SHEET METAL JOINTS
Adv. Sci. Technol. Res. J. 2018; 12(2):35–41
EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adv. Sci. Technol. Res. J. 2018; 12(2):42–51
Studying the Effect of Finishing Work on the Geometric Accuracy of the Laser Cut Elements
Adv. Sci. Technol. Res. J. 2018; 12(1):267–272
Influence and Optimization of the Setting of Input Parameters of Laser Profilometry by the Surface Measurement Manufactured by the AWJ Technology
Adv. Sci. Technol. Res. J. 2018; 12(1):329–337
Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Adv. Sci. Technol. Res. J. 2018; 12(1):236–243
Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Adv. Sci. Technol. Res. J. 2018; 12(1):135–141
Operational Properties of Anti-graffiti Coating Systems for Rolling Stock
Adv. Sci. Technol. Res. J. 2018; 12(1):127–134
The Evaluation of Properties of Mechanically Clinched Joints Made of Ferrous and Non-Ferrous Materials
Adv. Sci. Technol. Res. J. 2018; 12(1):162–170
Effect of Tool Eccentricity on Microstructure and Properties of FSW Joints Made of Al 7075 T6 Alloy
Adv. Sci. Technol. Res. J. 2017; 11(4):333–338
Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
Adv. Sci. Technol. Res. J. 2017; 11(4):286–293
Tribological Properties of Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions Determined in the Tests Conducted in Engine Fuel Atmosphere
Adv. Sci. Technol. Res. J. 2017; 11(4):215–219
Optimization of Production Processes Using the Yamazumi Method
Adv. Sci. Technol. Res. J. 2017; 11(4):175–182
Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
Adv. Sci. Technol. Res. J. 2017; 11(4):305–310
Influence of Polylactide Modification with Blowing Agents on Selected Mechanical Properties
Adv. Sci. Technol. Res. J. 2017; 11(4):206–214
The Effect of Machining Conditions on the Forces in the Process of Roller Brush Machining
Adv. Sci. Technol. Res. J. 2017; 11(4):294–300
The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Adv. Sci. Technol. Res. J. 2017; 11(4):260–269
Possibilities of More Efficient Use of Simulation Tools in Enterprise Logistics
Adv. Sci. Technol. Res. J. 2017; 11(4):189–197
Stone Dust Agglomeration for Utilizing as Building Material
Adv. Sci. Technol. Res. J. 2017; 11(4):168–174
Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Adv. Sci. Technol. Res. J. 2017; 11(4):159–167
Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Adv. Sci. Technol. Res. J. 2017; 11(4):97–102
Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Adv. Sci. Technol. Res. J. 2017; 11(4):83–96
Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Adv. Sci. Technol. Res. J. 2017; 11(4):111–122
Influence of Machining Strategies and Technological History of Semi-Finished Product on the Deformation of Thin-Wall Elements After Milling
Adv. Sci. Technol. Res. J. 2017; 11(3):289–296
Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints
Adv. Sci. Technol. Res. J. 2017; 11(3):270–276
The Use of Lean Manufacturing Techniques – SMED Analysis to Optimization of the Production Process
Adv. Sci. Technol. Res. J. 2017; 11(3):187–195
Assessment of the Impact of Probe Head Hysteresis on the Accuracy of Five-Axis Coordinate Measuring Systems
Adv. Sci. Technol. Res. J. 2017; 11(3):277–282
Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Adv. Sci. Technol. Res. J. 2017; 11(3):150–163
Most read
- Month
- Year