PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access

Topic Engineering and Technological Design

 

A Novel Simple Technique for Measuring the Volumetric Flow Rate and Direction of Flow Inside a Pipe – The Single and Double Coils Sensors
Asem Mohammad AL Jarrah
Adv. Sci. Technol. Res. J. 2022; 16(5):290-298
DOI: https://doi.org/10.12913/22998624/155038
 

Design of Metallurgical Production in the Context of Industry 4.0
Vladimír Rudy, Peter Malega, Naqib Daneshjo, Juraj Kováč
Adv. Sci. Technol. Res. J. 2022; 16(5):271-276
DOI: https://doi.org/10.12913/22998624/155036
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

The Effect of Undercut Anchor Diameter on the Rock Failure Cone Area in Pullout Tests
Józef Jonak, Robert Karpiński, Andrzej Wójcik, Michał Siegmund
Adv. Sci. Technol. Res. J. 2022; 16(5):261-270
DOI: https://doi.org/10.12913/22998624/154894
 

Hydrogen Enriched Hydrocarbons as New Energy Resources – As Studied by Means of Computer Simulations
Andrzej Wasiak, Olga Orynycz, Karol Tucki, Antoni Świć
Adv. Sci. Technol. Res. J. 2022; 16(5):78-85
DOI: https://doi.org/10.12913/22998624/154001
 

Experimental Research on the Influence of the Composition of the Fuel Mixture on the Operating Parameters of a Single-Cylinder Common Rail Diesel Engine
Karol Tucki, Remigiusz Mruk
Adv. Sci. Technol. Res. J. 2022; 16(5):100-109
DOI: https://doi.org/10.12913/22998624/153965
 

Construction and Verification for Metrological Properties of the Prototype Magnetic Head for Nondestructive Testing of Lift Guide Rail Wear under Test Conditions
Tomasz Krakowski, Hubert Ruta, Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2022; 16(5):28-39
DOI: https://doi.org/10.12913/22998624/153045
 

Modeling of a Primary Air Distribution in a Plenum Chamber of the 700 MWth Circulating Fluidized Bed Boiler
Paweł Mirek
Adv. Sci. Technol. Res. J. 2022; 16(5):86-99
DOI: https://doi.org/10.12913/22998624/152673
 

Strength of Epoxy-Bonded Aluminium Alloy Joints After Sandblasting
Anna Rudawska, Magd Abdel Wahab, Miroslav Müller
Adv. Sci. Technol. Res. J. 2022; 16(2):262-279
DOI: https://doi.org/10.12913/22998624/147524
 

Parametric Analysis on the Progression of Mechanical Properties on FSW of Aluminum-Copper Plates
Anil Kumar Deepati, Waleed Alhazmi, Waleed Zakri, Essam Shaban, Pankaj Biswas
Adv. Sci. Technol. Res. J. 2022; 16(2):168-178
DOI: https://doi.org/10.12913/22998624/147123
 

Investigating the Effect of Sisal Fibre Content on Durability Properties of Lightweight Foamed Concrete
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(2):141-149
DOI: https://doi.org/10.12913/22998624/147065
 

Testing the Use of Rounded Valley Aggregate in Concrete Mix in Comparison with Crushed Limestone Aggregate
Mohmd Kh Sarireh
Adv. Sci. Technol. Res. J. 2022; 16(1):282-293
DOI: https://doi.org/10.12913/22998624/145497
 

The Method of Transferring Topology Optimization Results Directly to the CAD System Database
Konrad Łyduch, Jacek Łukaszyk, Michał Nowak
Adv. Sci. Technol. Res. J. 2022; 16(1):243-252
DOI: https://doi.org/10.12913/22998624/144853
 

Implementation and Analysis of Mathematical Modeled Drive Train System in Type III Wind Turbines Using Computational Fluid Dynamics
Subash Ranjan Kabat, Chinmoy Kumar Panigrahi, Bibhu Prasad Ganthia, Subrat Kumar Barik, Byamakesh Nayak
Adv. Sci. Technol. Res. J. 2022; 16(1):180-189
DOI: https://doi.org/10.12913/22998624/144753
 

Rational Liquid Cooling Systems of Internal Combustion Engines
Yuryi Moshentsev, Oleksiy Gogorenko, Olha Dvirna
Adv. Sci. Technol. Res. J. 2022; 16(1):158-169
DOI: https://doi.org/10.12913/22998624/144345
 

Investigations of Adhesive Properties of Polyamide Modified with Friction Reducing Agents
Kamil Anasiewicz, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2022; 16(1):113-121
DOI: https://doi.org/10.12913/22998624/144337
 

Research of the Tool Velocity and Product Shape Aspects of the Hot Radial Rolling of C45 Steel Rings
Piotr Surdacki, Andrzej Gontarz, Grzegorz Winiarski, Grzegorz Samołyk
Adv. Sci. Technol. Res. J. 2021; 15(4):352-363
DOI: https://doi.org/10.12913/22998624/143269
 

Vulnerability Assessment of Steel Structures with Plan Irregularities Subjected to Fire
Bhavana Jadhav, Ravindra Ramanand
Adv. Sci. Technol. Res. J. 2021; 15(4):273-282
DOI: https://doi.org/10.12913/22998624/142739
 

Response Time Estimation in Robotics Using Hierarchical Performance Modeling Approach
Ahmed Alsheikhy, Muhannad Almutiry
Adv. Sci. Technol. Res. J. 2021; 15(4):14-20
DOI: https://doi.org/10.12913/22998624/142655
 

Influence of Axial Compressor Model Simplification and Mesh Density on Surge Margin Evaluation
Rafał Muchowski, Sławomir Maciej Gubernat
Adv. Sci. Technol. Res. J. 2021; 15(3):243-253
DOI: https://doi.org/10.12913/22998624/140541
 

The Concept of a Collection System for Gas Mixture from the Interior of Chimney Openings for Unmanned Flying Systems
Michał Klimczyk
Adv. Sci. Technol. Res. J. 2021; 15(3):191-196
DOI: https://doi.org/10.12913/22998624/140494
 

Study on Tool Condition Parameters Intended for Smart Tool Management in Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2021; 15(3):108-116
DOI: https://doi.org/10.12913/22998624/138532
 

Advances in Surface Engineering Using TIG Processing to Incorporate Ceramic Particulates into Low Alloy and Microalloyed Steels – A Review
Patricia Munoz-Escalona, Shahjahan Mridha, Thomas Neville Baker
Adv. Sci. Technol. Res. J. 2021; 15(3):88-98
DOI: https://doi.org/10.12913/22998624/138467
 

Influence of the Power of Various Types of Induction Furnaces on the Shape of the Metal Bath Surface
Albert Smalcerz, Bartosz Węcki, Leszek Blacha
Adv. Sci. Technol. Res. J. 2021; 15(3):34-42
DOI: https://doi.org/10.12913/22998624/138245
 

Design Principles of Horizontal Drum Machines with Low Vibration
Ilona Drach, Andrii Goroshko, Renata Dwornicka
Adv. Sci. Technol. Res. J. 2021; 15(2):258-268
DOI: https://doi.org/10.12913/22998624/136441
 

Optimization of a Jet Engine Compressor Disc with Application of Artificial Neural Networks for Calculations Related to Time and Mass Criteria
Rafał Kieszek, Adam Kozakiewicz, Robert Rogólski
Adv. Sci. Technol. Res. J. 2021; 15(2):208-218
DOI: https://doi.org/10.12913/22998624/134061
 

Structural Analysis and Optimization of Electric Bike Front Drive with Bottom Bracket Electric Motor
Elmedin Mesic, Adnan Masic, Enis Muratović, Muamer Delic, Salem Hasanbegovic
Adv. Sci. Technol. Res. J. 2021; 15(1):273-282
DOI: https://doi.org/10.12913/22998624/132613
 

Temperature Effect on Buckling Properties of Thin-Walled Composite Profile Subjected to Axial Compression
Katarzyna Falkowicz, Michał Kuciej, Łukasz Święch
Adv. Sci. Technol. Res. J. 2024; 18(3):305-313
 

Effect of the Electrode Extension on the Geometry of Parts Made of 316LSi Steel by Wire Arc Additive Manufacturing Method (WAAM)
Przemysław Połaski, Dariusz Golański, Paweł Kołodziejczak, Anna Pakuła
Adv. Sci. Technol. Res. J. 2024; 18(3):343-359
 

Experimental Energy Recovery from a Backpack Using Various Harvester Concepts
Krzysztof Kecik
Adv. Sci. Technol. Res. J. 2024; 18(3):67-78
 

Influence of Selected Weather Conditions on the Photovoltaic System Efficiency in Central Poland – Case Study
Mariusz T. Sarniak
Adv. Sci. Technol. Res. J. 2024; 18(2):177-186
DOI: https://doi.org/10.12913/22998624/184104
 

Design and Implementation of a Versatile Flexible 3D Wire Bending Machine with Accuracy Algorithm
Mohammed O. Farhan, Mohanned M.H. AL-Khafaji, Muhannad Q. Abood
Adv. Sci. Technol. Res. J. 2024; 18(1):244-254
DOI: https://doi.org/10.12913/22998624/180310
 

Innovative Design and Machining Verification of a Dual Axis Swivel Table for a Milling Machine
Wei-Zhu Lin, Jian-Xuan Xiao, Yung-Chih Lin, Bo-Wei Chang, Jui-Pin Hung
Adv. Sci. Technol. Res. J. 2024; 18(1):306-319
DOI: https://doi.org/10.12913/22998624/178528
 

Improves the Brake Working of the Rescue Winch to Control the Stop Brake Process
Truong Giang Duong, Van Tinh Nguyen
Adv. Sci. Technol. Res. J. 2024; 18(1):255-267
DOI: https://doi.org/10.12913/22998624/177662
 

Influence of the Extrusion Cavity Shape on the Ultimate Extrusion Force Value During Pellet Extrusion Through Multiple-Cavity Dies
Jan Górecki, Wiktor Łykowski, Maria Gumeni
Adv. Sci. Technol. Res. J. 2024; 18(1):118-128
DOI: https://doi.org/10.12913/22998624/177029
 

Additive and Subtractive Manufacturing of Inconel 718 Components - Estimation of Time, Costs and Carbon Dioxide Emission – Case Study
Wojciech Zębala, Anna Gaweł
Adv. Sci. Technol. Res. J. 2024; 18(1):98-109
DOI: https://doi.org/10.12913/22998624/176824
 

Study on Near-Dry EDM Performance Characteristics of MSGNP/Al-7075 Using Air, Argon, Nitrogen, and Freon Dielectric Medium
Haneen Lateef Abd, Saad Mahmood Ali
Adv. Sci. Technol. Res. J. 2023; 17(6):254-273
DOI: https://doi.org/10.12913/22998624/174970
 

Measurements of Tensile Strength and Elongation of 3D Printed Polylactide Solids Produced with Different Temperatures of Extruder Using Coordinate Measuring Technique and Finite Element Method
Anna Magdalena Gaweł, Ksenia Ostrowska, Aleksandra Lisowska
Adv. Sci. Technol. Res. J. 2023; 17(6):356-366
DOI: https://doi.org/10.12913/22998624/174907
 

Numerical and Experimental Studies on 3D Printed Compliant Mechanisms in Gripper Applications
Piotr Wiesław Niedziałek, Aleksy Figurski, Michał Piotr Kowalik
Adv. Sci. Technol. Res. J. 2023; 17(6):228-244
DOI: https://doi.org/10.12913/22998624/174109
 

Geometrical Accuracy and Strength of Micro-Needles Made of Polylactide by Fused Filament Fabrication Method
Radosław Wichniarek, Wiesław Kuczko, Dorota Tomczak, Ariadna Nowicka, Monika Wojtyłko, Anna Froelich, Tomasz Osmałek
Adv. Sci. Technol. Res. J. 2023; 17(6):116-126
DOI: https://doi.org/10.12913/22998624/174079
 

Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys
Magdalena Jażdżewska, Beata Majkowska-Marzec, Roman Ostrowski, Jean-Marc Olive
Adv. Sci. Technol. Res. J. 2023; 17(6):27-38
DOI: https://doi.org/10.12913/22998624/172981
 

Numerical Study of the Effect of the Trailing-Edge Devices (Gurney Flap and Divergent Trailing-edge Flap) on the Aerodynamic Characteristics of an Airfoil in Transonic Flow for Drone Applications
Malgorzata Kmiotek, Adrian Kordos, Adam Piszczatowski, Adam Zaremba
Adv. Sci. Technol. Res. J. 2023; 17(5):248-259
DOI: https://doi.org/10.12913/22998624/172565
 

Prediction of Waviness Values in Skew Rolling Using Machine Learning Methods
Konrad Lis, Zbigniew Pater, Janusz Tomczak, Tomasz Adam Bulzak, Tomasz Kusiak
Adv. Sci. Technol. Res. J. 2023; 17(5):350-359
DOI: https://doi.org/10.12913/22998624/172338
 

Experimental Investigation on an Algorithm for Testing the Quality of Powder Distribution During 3D Printing Process
Marcin Korzeniowski, Aleksandra Małachowska, Mateusz Biały, Maria Kanczewska, Michał Tkaczyk, Krzysztof Grajczyk
Adv. Sci. Technol. Res. J. 2023; 17(5):289-301
DOI: https://doi.org/10.12913/22998624/171809
 

A New Effective Algorithm for Mechanical Assembly Sequence Planning
Michał Sąsiadek, Maciej Niedziela, Waldemar Woźniak, Tomasz Jachowicz, Nikoleta Mikušová
Adv. Sci. Technol. Res. J. 2023; 17(5):56-67
DOI: https://doi.org/10.12913/22998624/171271
 

Investigation of Multi-Cold Rolling Passes on Mechanical Characteristics and Surface Quality of AlCuV Alloy
Nabeel Abu Shaban, Safwan M Al-Qawabah, Hashem S. Alkhaldi
Adv. Sci. Technol. Res. J. 2023; 17(5):68-76
DOI: https://doi.org/10.12913/22998624/171265
 

Conception of a Durability Prediction Method for a Metal-elastomer Machine Mount
Wojciech Sikora, Robert Pilch, Maksymilian Smolnik
Adv. Sci. Technol. Res. J. 2023; 17(5):28-40
DOI: https://doi.org/10.12913/22998624/170978
 

The Influence of Light Intensity on the Operation of Vision System in Collaborative Robot
Adrian Bochen, Bartłomiej Ambrożkiewicz
Adv. Sci. Technol. Res. J. 2023; 17(4):206-214
DOI: https://doi.org/10.12913/22998624/169884
 

Mandrel-Free Bending of Tubes with Small Radii – A Theoretical and Experimental Study
Jacek Michalczyk, Andrzej Gontarz, Sylwia Wiewiórowska, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2023; 17(4):189-205
DOI: https://doi.org/10.12913/22998624/169883
 

Study to Determine the Effect of Blade Distance and Chain Speed on the Productivity of Trench Excavators Using Taguchi Method
Duong Truong Giang
Adv. Sci. Technol. Res. J. 2023; 17(4):139-149
DOI: https://doi.org/10.12913/22998624/169427
 

Innovative Technologies for the Use of Drilling Waste in Reclamation and Shaping the Physicochemical Properties of Degraded Soils
Marta Bik-Małodzińska, Grażyna Żukowska, Iwona Paśmionka
Adv. Sci. Technol. Res. J. 2023; 17(3):294-301
DOI: https://doi.org/10.12913/22998624/166759
 

Bayesian Regression Based Approach for Beam Deflection Estimation
Raed Sabri Batbooti, Bassam A. Mohammed, Tahseen Ali Jabbar, Safaa H. Faisal
Adv. Sci. Technol. Res. J. 2023; 17(3):206-213
DOI: https://doi.org/10.12913/22998624/166313
 

Investigation of Adding Microscopic Slide Glass Nano Particles on the Metallurgical Characterization and Mechanical Properties of Cast Aluminum 7075 Composites
Haneen Lateef, Shukry H. Aghdeab, Baha S. Mahdi
Adv. Sci. Technol. Res. J. 2023; 17(3):214-225
DOI: https://doi.org/10.12913/22998624/166282
 

Apparatus for the Measurement of Electromagnetic Activity of Landslides
Krzysztof Maniak, Remigiusz Mydlikowski
Adv. Sci. Technol. Res. J. 2023; 17(3):184-195
DOI: https://doi.org/10.12913/22998624/166202
 

Analysis and Improvement of an Industrial Process of Hot Die Forging of an Elongated Forging Tipped with a Joggle with the Use of Numerical Simulation Results
Marek Robert Hawryluk, Marcin Rychlik, Sławomir Polak, Maciej Zwierzchowski, Łukasz Dudkiewicz, Jan Marzec, Paweł Jabłoński
Adv. Sci. Technol. Res. J. 2023; 17(2):192-205
DOI: https://doi.org/10.12913/22998624/162158
 

Influence of Water-Jet on Micro-Formed Parts Process via Nano-Indentation and SEM Analysis
James Kwasi Quaisie, Philip Yamba, Vitus Mwinteribo Tabie, Anthony Akayeti, Jamal-Deen Kukurah, Abdul-Hamid Mohammed
Adv. Sci. Technol. Res. J. 2023; 17(2):353-361
DOI: https://doi.org/10.12913/22998624/161884
 

A High Gain Single Switch DC-DC Converter with Double Voltage Booster Switched Inductors
Nagaraju Addagatla, Rajender Boini
Adv. Sci. Technol. Res. J. 2023; 17(2):1-11
DOI: https://doi.org/10.12913/22998624/161447
 

Analysis of Flow-Induced Vibrations in a Heat Exchanger Tube Bundle Subjected to Variable Tube Flow Velocity
Akmal Hafeez, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman, Muhammad Mohsin Rashid, Hasan Farid Khan, Muhammad Ayub, Adeel Qadir
Adv. Sci. Technol. Res. J. 2023; 17(2):279-288
DOI: https://doi.org/10.12913/22998624/161278
 

Influence of the Quality of Metal Sheet Edges After Strip Slitting Processes in Integrated Lines on the Quality of Laser Welds
Marcin Stańczyk
Adv. Sci. Technol. Res. J. 2023; 17(2):136-146
DOI: https://doi.org/10.12913/22998624/161239
 

Research on an Innovative FLEX Bicycle Frame with a Softtail Vibration Damping System
Łukasz Kuczek, Paweł Marczak, Wacław Muzykiewicz, Marcin Mroczkowski, Paweł Paćko, Dawid Drop
Adv. Sci. Technol. Res. J. 2023; 17(1):290-303
DOI: https://doi.org/10.12913/22998624/159041
 

The Effect of Fiber Arrangement in the Bio-Laminate and Geometric Parameters on the Stability of Thin-Walled Angle Column Under Axial Compression
Jarosław Gawryluk
Adv. Sci. Technol. Res. J. 2023; 17(1):150-159
DOI: https://doi.org/10.12913/22998624/158854
 

Analysis of Torsional Strength of PA2200 Material Shape Additively with the Selective Laser Sintering Technology
Jacek Bernaczek, Mariusz Dębski, Małgorzata Gontarz, Roman Grygoruk, Jerzy Józwik, Bogdan Kozik, Piotr Mikulski
Adv. Sci. Technol. Res. J. 2023; 17(2):12-24
DOI: https://doi.org/10.12913/22998624/158838
 

Selected Aspects of 3D Printing for Emergency Replacement of Structural Elements
Krzysztof Jasiński, Lech Murawski, Marcin Kluczyk, Adam Muc, Adam Szeleziński, Tomasz Muchowski, Marek Chodnicki
Adv. Sci. Technol. Res. J. 2023; 17(1):274-289
DOI: https://doi.org/10.12913/22998624/158486
 

Supporting Welding Work in the Aspect of Increasing Production Process Efficiency
Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2023; 17(1):8-14
DOI: https://doi.org/10.12913/22998624/157418
 

Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Adv. Sci. Technol. Res. J. 2023; 17(1):35-45
DOI: https://doi.org/10.12913/22998624/157393
 

Dimensional-Shape Verification of a Selected Part of Machines Manufactured by Additive Techniques
Jacek Bernaczek, Grzegorz Budzik, Tomasz Dziubek, Łukasz Przeszłowski, Kinga Wójciak
Adv. Sci. Technol. Res. J. 2023; 17(1):46-57
DOI: https://doi.org/10.12913/22998624/157289
 

Usage of Cold Forcing Method for a Gas Turbine Engine of Supersonic Transport
Viktors Gutakovskis, Vladimirs Gudakovskis, Ilmars Blumbergs, Elina Sarma
Adv. Sci. Technol. Res. J. 2023; 17(1):267-273
DOI: https://doi.org/10.12913/22998624/156985
 

Research of Speed Parameters of the Ring Rolling Process
Piotr Surdacki, Andrzej Gontarz, Grzegorz Winiarski, Łukasz Wójcik, Sylwia Wiewiórowska
Adv. Sci. Technol. Res. J. 2022; 16(6):251-257
DOI: https://doi.org/10.12913/22998624/156816
 

Evaluation of Wind Energy Potential in View of the Wind Speed Parameters – A Case Study for the Southern Jordan
Sameh Alsaqoor, Abdullah Marashli, Reem At-Tawarah, Gabriel Borowski, Ali Alahmer, Nader Aljabarin, Nabil Beithou
Adv. Sci. Technol. Res. J. 2022; 16(6):275-285
DOI: https://doi.org/10.12913/22998624/156412
 

The Bio-Oil Production by Pulse Power Discharges
Sebastian Gnapowski, Volodymyr Holubets, Ernest Gnapowski
Adv. Sci. Technol. Res. J. 2022; 16(6):226-231
DOI: https://doi.org/10.12913/22998624/156206
 

Influence of Physical and Constructive Parameters on Durability of Sieves of Grain Cleaning Machines
Serhii Kharchenko, Farida Kharchenko, Sylwester Samborski, Jakub Paśnik, Stepan Kovalyshyn, Kiril Sirovitskiy
Adv. Sci. Technol. Res. J. 2022; 16(6):156-165
DOI: https://doi.org/10.12913/22998624/156128
 

Repair of Closed Fermentation Chamber and its Influence on Strength Properties of the Tank – Case Study
Bogdan Szturomski, Radosław Kiciński, Aneta Szturomska, Jacek Krawczyk
Adv. Sci. Technol. Res. J. 2022; 16(6):97-107
DOI: https://doi.org/10.12913/22998624/155817
 

Effect of the Aerodynamic Elements of the Hatchback Tailgate on the Aerodynamic Drag of the Vehicle
Michal Fabian, Róbert Huňady, František Kupec, Tomáš Mlaka
Adv. Sci. Technol. Res. J. 2022; 16(6):73-87
DOI: https://doi.org/10.12913/22998624/155308
 

Creation of More Efficient Work Environment through the New Design of the Automatic Robotic Assembly Station
Naqib Daneshjo, Dušan Sabadka, Peter Malega, Matúš Dzuro, Michal Jankovič
Adv. Sci. Technol. Res. J. 2022; 16(4):74-84
DOI: https://doi.org/10.12913/22998624/151547
 

Optimization of Proportional-Integral Controllers of Grid-Connected Wind Energy Conversion System Using Grey Wolf Optimizer Based on Artificial Neural Network for Power Quality Improvement
Fathi Abdulmajeed M. Alremali, Ersagun Kürşat Yaylacı, İhsan Uluer
Adv. Sci. Technol. Res. J. 2022; 16(3):295-305
DOI: https://doi.org/10.12913/22998624/150401
 

Possibilities for Improving the Cooling Systems of IC Engines of Marine Power Plants
Yuryi Moshentsev, Oleksiy Gogorenko, Olha Dvirna
Adv. Sci. Technol. Res. J. 2022; 16(3):183-192
DOI: https://doi.org/10.12913/22998624/149658
 

Magnetic Coupling of Two Coils Due to Flow of Pure Water Inside Them – Double Coil Volumetric Flow Sensor
Asem Mohammad AL Jarrah, Nader Aljabarin
Adv. Sci. Technol. Res. J. 2022; 16(3):47-53
DOI: https://doi.org/10.12913/22998624/147973
 

Case Study of Composite Chassis Manufacturing Process Using Low Temperature Molds Tempered with Gradual Heat Annealing Process
Witold Rządkowski, Przemysław Klik, Jan Tracz, Michał Kowalik
Adv. Sci. Technol. Res. J. 2022; 16(3):12-21
DOI: https://doi.org/10.12913/22998624/147368
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top