PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access

Topic Computer Modeling and Simulations

 

An Influence of Geometrical Parameters of the Lock of the Blade-Disc Joint on Stress in the FEA and DIC Methods
Olga Grzejszczak, Adam Kozakiewicz
Adv. Sci. Technol. Res. J. 2021; 15(1):209-217
DOI: https://doi.org/10.12913/22998624/131662
 

On the Question of Methodology of Hybrid Sliding Bearings Estimated Load Capacity and Durability Evaluation
Myron Chernets, Mykhaylo Pashechko, Anatolii Kornienko, Juriy Chernets, Svetlana Fedorchuk
Adv. Sci. Technol. Res. J. 2020; 14(4):177-184
DOI: https://doi.org/10.12913/22998624/127169
 

The Use of Complex Networks Tools to Describe the Current State of Multidisciplinary Research in Poland
Izolda Gorgol
Adv. Sci. Technol. Res. J. 2020; 14(4):125-138
DOI: https://doi.org/10.12913/22998624/126970
 

The Study on the Damage of the Rear-Axle Shaft in a KIA Truck
Krzysztof Siczek, Marek Wozniak, Gustavo Ozuna
Adv. Sci. Technol. Res. J. 2020; 14(4):115-124
DOI: https://doi.org/10.12913/22998624/126508
 

Analysis of Impact of Gust Angle and Velocity on the Position of Stagnation Point
Michał Frant, Adam Kozakiewicz, Stanisław Kachel
Adv. Sci. Technol. Res. J. 2020; 14(4):49-57
DOI: https://doi.org/10.12913/22998624/123006
 

Analysis of the Selection of Compensation Devices Determining the Reactive Power Balance of Wind Farms
Michalina Gryniewicz-Jaworska
Adv. Sci. Technol. Res. J. 2020; 14(4):30-36
DOI: https://doi.org/10.12913/22998624/122484
 

Prediction of the Service Life of Metal-Polymer Gears Made of Glass and Carbon Fibre-Reinforced Polyamide, Considering the Impact of Height Correction
Myron Chernets, Anatoliy Kornienko
Adv. Sci. Technol. Res. J. 2020; 14(3):15-21
DOI: https://doi.org/10.12913/22998624/124553
 

Reducing Delay Time at Signal Controlled Junction with the Help of Actuated Control
Ľubomír Černický, Jana Kupčuljaková, Jozef Paľo, Alica Kalašová
Adv. Sci. Technol. Res. J. 2020; 14(3):149-157
DOI: https://doi.org/10.12913/22998624/122778
 

A Search Method for Reassembling the Elements of a Broken 2D Object
Jerzy Montusiewicz, Stanisław Piotr Skulimowski
Adv. Sci. Technol. Res. J. 2020; 14(3):49-56
DOI: https://doi.org/10.12913/22998624/122570
 

Investigation of the Aerodynamic Drag Force Exerted on a Powerboat
Zbigniew Czyż, Paweł Karpiński, Chahin Boujelbene
Adv. Sci. Technol. Res. J. 2020; 14(3):141-148
DOI: https://doi.org/10.12913/22998624/122296
 

Neural Networks in Crashworthiness Analysis of Thin-Walled Profile with Foam Filling
Michał Karol Rogala
Adv. Sci. Technol. Res. J. 2020; 14(3):93-99
DOI: https://doi.org/10.12913/22998624/120989
 

Application of Heuristic Optimization for the Selection of Parameters of the Generation System and Reactive Power Consumption of Wind Farms
Michalina Gryniewicz-Jaworska
Adv. Sci. Technol. Res. J. 2020; 14(3):9-14
DOI: https://doi.org/10.12913/22998624/120929
 

A Computational Algorithm for Path Interval Determination in Multi-Axis Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2020; 14(2):198-205
DOI: https://doi.org/10.12913/22998624/119047
 

Determination of the Value of the Damage Function in 1050A Aluminium Alloy
Patrycja Walczuk-Gągała, Zbigniew Pater, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2020; 14(2):49-55
DOI: https://doi.org/10.12913/22998624/118105
 

Numerical Analysis of the Cross-Wedge of a Hollow Rail Axle
Zbigniew Pater, Konrad Lis, Patrycja Walczuk-Gągała
Adv. Sci. Technol. Res. J. 2020; 14(1):145-153
DOI: https://doi.org/10.12913/22998624/115513
 

Design of the Optimal Geometry of the Moulded Piece Based on Numerical Analyses in Cadmould 3D-F
Paweł Mańko, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2020; 14(1):96-106
DOI: https://doi.org/10.12913/22998624/114961
 

Numerical Modeling of Superplastic Punchless Deep Drawing Process of a Ti-6Al-4V Titanium Alloy
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2020; 14(1):127-136
DOI: https://doi.org/10.12913/22998624/114029
 

An Optimization Study for Bridge Design of a Porthole Extrusion Die
Önder Ayer, Burcu Gizem Özmen, İsmail Karakaya
Adv. Sci. Technol. Res. J. 2019; 13(4):270-275
DOI: https://doi.org/10.12913/22998624/115109
 

Numerical Analysis of the Influence of Particular Parts of the High Efficient Electric Vehicle on the Aerodynamic Forces
Zbigniew Czyż, Paweł Karpiński, Salih Koçak
Adv. Sci. Technol. Res. J. 2019; 13(4):1-7
DOI: https://doi.org/10.12913/22998624/112835
 

Modelling Noise Exposure by Means of Infrared Technology
Gabriel Fedorko, David Heinz, Vieroslav Molnár, Tomas Brenner
Adv. Sci. Technol. Res. J. 2019; 13(4):230-238
DOI: https://doi.org/10.12913/22998624/112683
 

Soft-Sensing in Batch Annealing Based on Finite Differential Method and Support Vector Regression
Ján Kačur, Milan Durdán, Marek Laciak, Patrik Flegner
Adv. Sci. Technol. Res. J. 2019; 13(4):70-86
DOI: https://doi.org/10.12913/22998624/112542
 

Robust Diagnosis of a Proton Exchange Membrane Fuel Cell Using Bond Graph Methodlogy – Physical and Electrical Faults Detection and Isolation
Abderrahmene Sallami, Dhia Mzoughi, Abdelkader Mami
Adv. Sci. Technol. Res. J. 2019; 13(4):194-203
DOI: https://doi.org/10.12913/22998624/111704
 

Failure Analysis of Thin-Walled Composite Profile Subjected to Axial Compression
Patryk Różyło
Adv. Sci. Technol. Res. J. 2019; 13(3):170-178
DOI: https://doi.org/10.12913/22998624/111967
 

Numerical Crush Analysis of Thin-Walled Aluminium Columns with Square Cross-Section and a Partial Foam Filling
Mirosław Ferdynus, Michał Rogala
Adv. Sci. Technol. Res. J. 2019; 13(3):144-151
DOI: https://doi.org/10.12913/22998624/110611
 

Kinematic Modeling and Analysis of a Walking Machine (Robot) Leg Mechanism on a Rough Terrain
Tesfaye O. Terefe, Hirpa G. Lemu, Addisu K/Mariam, Tadele B. Tuli
Adv. Sci. Technol. Res. J. 2019; 13(3):43-53
DOI: https://doi.org/10.12913/22998624/109792
 

Influence of the Trochoidal Tool Path on Quality Surface of Groove Walls
Kamil Piotr Waszczuk, Hubert Skowronek, Paweł Karolczak, Maciej Kowalski, Marek Kołodziej
Adv. Sci. Technol. Res. J. 2019; 13(3):38-42
DOI: https://doi.org/10.12913/22998624/109789
 

Mobile Devices and Applications Use for Students of Technological Education
Halina Rarot, Olexandr Omelchuk, Vitaliy Tsisaruk
Adv. Sci. Technol. Res. J. 2019; 13(3):86-89
DOI: https://doi.org/10.12913/22998624/109783
 

Studying the Flexural Behavior of Reinforced Concrete Beams under the Effect of High Temperature: A Finite Element Model
Hamadallah Al-Baijat, Mohammad Ahmad Alhawamdeh, Aya Khawaldeh
Adv. Sci. Technol. Res. J. 2019; 13(2):150-156
DOI: https://doi.org/10.12913/22998624/109055
 

Modeling of Post-Failure Behavior of the Rock Mass and its Effect on the Stress-Deformation State in the Vicinity of a Mining Excavation
Halina Marczak
Adv. Sci. Technol. Res. J. 2019; 13(2):130-140
DOI: https://doi.org/10.12913/22998624/108647
 

Research of Typical Information Objects Traffic
Vadim Goykhman, Luiza Korganbaeva, Alexey Ermakov, Maria Nikolaeva
Adv. Sci. Technol. Res. J. 2019; 13(2):51-55
DOI: https://doi.org/10.12913/22998624/106162
 

Design, Simulation and Production of Hydraulic Briquette Press for Metal Chips
Bisrat M. Kebede, Hirpa G. Lemu
Adv. Sci. Technol. Res. J. 2019; 13(2):24-30
DOI: https://doi.org/10.12913/22998624/105809
 

Investigating the Effects of Variable Valve Timing on Spark Ignition Engine Performance
Sepehr Bapiri, Cem Sorusbay
Adv. Sci. Technol. Res. J. 2019; 13(2):100-111
DOI: https://doi.org/10.12913/22998624/103917
 

CFD study of the Effect of Piston Crevice Volume on the Temperature Distribution in a Rapid Compression Machine
Oku Ekpenyong Nyong, Celestine Ebieto, Ene Ekpo Bassey, Ikem Azorshubel Ikem
Adv. Sci. Technol. Res. J. 2019; 13(1):46-51
DOI: https://doi.org/10.12913/22998624/103380
 

Comparative Analysis of Tube Piercing Processes in the Two-Roll and Three-Roll Mills
Zbigniew Pater, Łukasz Wójcik, Patrycja Walczuk
Adv. Sci. Technol. Res. J. 2019; 13(1):37-45
DOI: https://doi.org/10.12913/22998624/102766
 

Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2019; 13(1):29-36
DOI: https://doi.org/10.12913/22998624/100630
 

Investigation of the Dynamic Characteristics and Machining Stability of a Bi-rotary Milling Tool
Jui-Pin Hung, Wei-Zhu Lin
Adv. Sci. Technol. Res. J. 2019; 13(1):14-22
DOI: https://doi.org/10.12913/22998624/100449
 

Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2018; 12(4):207-215
DOI: https://doi.org/10.12913/22998624/100499
 

Stability Problems of Comperssed Thin-Walled Structures
Hubert Dębski
Adv. Sci. Technol. Res. J. 2018; 12(4):190-198
DOI: https://doi.org/10.12913/22998624/100441
 

The Problem of Material Fracture Prediction in Cross Rolling Processes
Zbigniew Pater, Janusz Tomczak, Tomasz Adam Bulzak, Andrzej Zniszczyński
Adv. Sci. Technol. Res. J. 2018; 12(4):184-189
DOI: https://doi.org/10.12913/22998624/100398
 

The Simulation of Conveyor Control System Using the Virtual Commissioning and Virtual Reality
Roman Ruzarovsky, Radovan Holubek, Daynier Rolando Delgado Sobrino, Matej Janíček
Adv. Sci. Technol. Res. J. 2018; 12(4):164-171
DOI: https://doi.org/10.12913/22998624/100349
 

An Effective and Fast Iranian License Plate Detection Using Statistical and Geometrical Approaches
Saman Poursiyah, Hosian Salami, Mohammad Mohebbi, Hamid Tabatabaee
Adv. Sci. Technol. Res. J. 2018; 12(4):115-125
DOI: https://doi.org/10.12913/22998624/100345
 

Tuning of PID Controllers – Approximate Methods
Krzysztof Przystupa
Adv. Sci. Technol. Res. J. 2018; 12(4):56-64
DOI: https://doi.org/10.12913/22998624/99987
 

Evaluation of the Damage Initiation of a Composite Thin-Walled Structure, on the Example of the ADUSTER Gyroplane Undercarriage
Karol Szklarek, Patryk Różyło
Adv. Sci. Technol. Res. J. 2018; 12(4):48-55
DOI: https://doi.org/10.12913/22998624/99986
 

Hybrid Modeling Methods of Cranial Implants
Marek Wyleżoł
Adv. Sci. Technol. Res. J. 2018; 12(4):35-47
DOI: https://doi.org/10.12913/22998624/99039
 

Use of Simulation for Waste Management and Reverse Material Flow
Nikoleta Mikušová, Eva Tomková, Miroslav Dovica, Borna Debelic, Ana Peric-Hadzic, Jozef Zajac
Adv. Sci. Technol. Res. J. 2018; 12(4):136-143
DOI: https://doi.org/10.12913/22998624/94965
 

Implementation of Innovative Methods for the Creation of Strategy Algorithms in CAD/CAM System Edgecam
Nadežda Čuboňová, Tomáš Dodok, Ivan Kuric, Miroslav Císar
Adv. Sci. Technol. Res. J. 2018; 12(4):10-18
DOI: https://doi.org/10.12913/22998624/92100
 

GEOMETRIC OPTIMIZATION OF A BEAM DETECTOR FOR A WIM SYSTEM
Aleksander Nieoczym, Kazimierz Drozd, Andrzej Wójcik
Adv. Sci. Technol. Res. J. 2018; 12(3):233-241
DOI: https://doi.org/10.12913/22998624/97296
 

INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2018; 12(3):242-249
DOI: https://doi.org/10.12913/22998624/95056
 

NUMERICAL ANALYSIS OF A FORGING PROCESS FOR PRODUCING A HOLLOW BALL FROM TUBE
Grzegorz Samołyk
Adv. Sci. Technol. Res. J. 2018; 12(3):150-157
DOI: https://doi.org/10.12913/22998624/94972
 

NUMERICAL ANALYSIS OF THE EFFECT OF NONMETALLIC INCLUSIONS LOCATION IN CARBURIZED LAYER OF 16MnCr5 STEEL ON INITIATION OF FATIGUE CRACKING
Sebastian Lipa
Adv. Sci. Technol. Res. J. 2018; 12(3):66-74
DOI: https://doi.org/10.12913/22998624/94943
 

POST-CRITICAL DEFORMATION OF THIN-WALLED LOAD-BEARING AIRCRAFT STRUCTURE REPRESENTING FRAGMENT OF THE ONE-WAY TORSION BOX
Tomasz Kopecki, Tomasz Lis, Przemysław Mazurek
Adv. Sci. Technol. Res. J. 2018; 12(3):203-209
DOI: https://doi.org/10.12913/22998624/94923
 

THERMOVISUAL MEASUREMENTS OF 3D PRINTING OF ABS AND PLA FILAMENTS
Łukasz Zgryza, Anna Raczyńska, Magdalena Paśnikowska-Łukaszuk
Adv. Sci. Technol. Res. J. 2018; 12(3):266-271
DOI: https://doi.org/10.12913/22998624/94325
 

OUT-OF-PLANE STATIC CRUSHING OF THIN-WALLED HONEYCOMB STRUCTURES. NU-MERICAL AND EXPERIMENTAL INVESTIGATION.
Radosław Ciepielewski, Paweł Dybcio, Wiesław Barnat
Adv. Sci. Technol. Res. J. 2018; 12(3):96-105
DOI: https://doi.org/10.12913/22998624/92176
 

LOCKING THE MOVEMENT OF PERSONS ON THE BRIDGE CRANE
Jozef Kuľka, Martin Mantič, Melichar Kopas, Eva Faltinova
Adv. Sci. Technol. Res. J. 2018; 12(2):260-265
DOI: https://doi.org/10.12913/22998624/92459
 

ASSESSMENT OF THE ECONOMIC EFFICIENCY OF THE MODERNIZATION OF CRUSHED STONE MANUFACTURING PROCESS: CASE STUDY
Jana Fabianová, Jaroslava Janeková, Michal Fabian
Adv. Sci. Technol. Res. J. 2018; 12(2):237-243
DOI: https://doi.org/10.12913/22998624/92299
 

DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Gabriel Fedorko, Hana Neradilová, Juraj Jackanin
Adv. Sci. Technol. Res. J. 2018; 12(2):170-179
DOI: https://doi.org/10.12913/22998624/92108
 

BUCKLING STABILITY ASSESSMENT OF PLATES UNDER UNIAXIAL COMPRESSION
Farhad Riahi, Tadeh Zirakian, Vahed Mam Ghaderi, Souran Arya
Adv. Sci. Technol. Res. J. 2018; 12(2):97-105
DOI: https://doi.org/10.12913/22998624/90789
 

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES
Gurkan Altan
Adv. Sci. Technol. Res. J. 2018; 12(2):65-70
DOI: https://doi.org/10.12913/22998624/89756
 

PRELIMINARY ANALYSIS OF A ROTARY COMPRESSION TEST
Zbigniew Pater, Patrycja Walczuk, Konrad Lis, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2018; 12(2):77-82
DOI: https://doi.org/10.12913/22998624/86812
 

THE AIR FLOW INFLUENCE ON THE DRAG FORCE OF A SPORTS CAR
Zbigniew Czyż, Paweł Karpiński, Michał Gęca, Jacobo Ulibarrena Diaz
Adv. Sci. Technol. Res. J. 2018; 12(2):121-127
DOI: https://doi.org/10.12913/22998624/86213
 

SOLUTION APPROACHES TO DIFFERENTIAL EQUATIONS OF MECHANICAL SYSTEM DYNAMICS: A CASE STUDY OF CAR SUSPENSION SYSTEM
Tesfaye Olana Terefe, Hirpa G. Lemu
Adv. Sci. Technol. Res. J. 2018; 12(2):266-273
DOI: https://doi.org/10.12913/22998624/85662
 

NUMERICAL ANALYSIS OF THE POSTBUCKLING OF THIN-WALLED COMPOSITE STRUCTURE WITH Z-PROFILE CROSS SECTION
Patryk Różyło
Adv. Sci. Technol. Res. J. 2018; 12(2):52-58
DOI: https://doi.org/10.12913/22998624/79829
 

EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adam Gnatowski, Marcin Sosnowski, Anna Pajdak, Jacek Sobczyk
Adv. Sci. Technol. Res. J. 2018; 12(2):42-51
DOI: https://doi.org/10.12913/22998624/78517
 

Acoustic Camera as a Fool for Identifying Machinery and Equipment Failures
Ľudmila Pavlikova, Beata Hricová, Ervín Lumnitzer
Adv. Sci. Technol. Res. J. 2018; 12(1):322-328
DOI: https://doi.org/10.12913/22998624/87110
 

Advanced Time-Frequency Representation in Voice Signal Analysis
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2018; 12(1):251-259
DOI: https://doi.org/10.12913/22998624/87028
 

The Design of Method Intended for Implementation of Collaborative Assembly Tasks
Vladimir Tlach, Ivan Kuric, Ivan Zajačko, Darina Kumičáková, Alexander Rengevič
Adv. Sci. Technol. Res. J. 2018; 12(1):244-250
DOI: https://doi.org/10.12913/22998624/86476
 

Simulation of Material Flow Through a Sample Divider
Jiří Rozbroj, Jan Nečas, David Žurovec, Jakub Hlosta, Daniel Gelnar, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2018; 12(1):194-199
DOI: https://doi.org/10.12913/22998624/85663
 

Design and Modelling of a Light Duty Trencher for Local Conditions
Hirpa G. Lemu, Delesa Kejela
Adv. Sci. Technol. Res. J. 2018; 12(1):303-311
DOI: https://doi.org/10.12913/22998624/85661
 

Buckling Deformation of Thin Layer Coverings of Small Curvatures Used in Aircraft Construction.
Tomasz Kopecki, Przemysław Mazurek, Tomasz Lis, Jerzy Bakunowicz
Adv. Sci. Technol. Res. J. 2018; 12(1):293-302
DOI: https://doi.org/10.12913/22998624/85660
 

Hob Identification Methods
Andrzej Piotrowski
Adv. Sci. Technol. Res. J. 2018; 12(1):150-161
DOI: https://doi.org/10.12913/22998624/81801
 

FEM Modelling of a Helical Wedge Rolling Process for Axisymmetric Parts
Zbigniew Pater, Janusz Tomczak
Adv. Sci. Technol. Res. J. 2018; 12(1):115-126
DOI: https://doi.org/10.12913/22998624/81767
 

Numerical Modelling of Behaviour of Surface Finishing of Composite Materials
Josef Vosáhlo, Martina Syrovatkova, Michal Petru
Adv. Sci. Technol. Res. J. 2018; 12(1):48-53
DOI: https://doi.org/10.12913/22998624/81449
 

Optimal Control of Wind Power Generation
Pawel Pijarski, Michal Wydra, Piotr Kacejko
Adv. Sci. Technol. Res. J. 2018; 12(1):9-18
DOI: https://doi.org/10.12913/22998624/81448
 

Numerical Simulation of Forming Titanium Thin-wall Panels with Stiffeners
Janina Adamus, Julita Winowiecka, Marcin Dyner, Piotr Lacki
Adv. Sci. Technol. Res. J. 2018; 12(1):54-62
DOI: https://doi.org/10.12913/22998624/80826
 

Diagnostics of the Passenger Lift Winch
Kamil Szydło, Rafał Longwic
Adv. Sci. Technol. Res. J. 2018; 12(1):26-35
DOI: https://doi.org/10.12913/22998624/76448
 

Finite Elements Strenght Analysis of a Compressor Consisting of Four Helical Rotors
Aleksander Nieoczym, Karol Szklarek
Adv. Sci. Technol. Res. J. 2018; 12(1):1-8
DOI: https://doi.org/10.12913/22998624/73822
 

Verifying the Prediction Result Reliability Using k-ε, Eddy Dissipation, and Discrete Transfer Models Applied on Methane Combustion Using a Prototype Low-Pressure Burner
Stanislav Honus, Václav Pospíšilík, Simona Jursová, Zdeněk Šmída, Vieroslav Molnár, Miroslav Dovica
Adv. Sci. Technol. Res. J. 2017; 11(4):252-259
DOI: https://doi.org/10.12913/22998624/80922
 

Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
DOI: https://doi.org/10.12913/22998624/80848
 

The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Stanisław Bławucki, Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2017; 11(4):260-269
DOI: https://doi.org/10.12913/22998624/80841
 

Identification of Noise Generated by Driving Set of Autogyro Using an Acoustic Camera
Paweł Magryta, Zbigniew Czyż, Krzysztof Skiba
Adv. Sci. Technol. Res. J. 2017; 11(4):247-251
DOI: https://doi.org/10.12913/22998624/80825
 

Possibilities of More Efficient Use of Simulation Tools in Enterprise Logistics
Matúš Hegedüš, Gabriel Fedorko, Matúš Beluško, Martina Hlatká, Pavel Fábera, Hana Neradilová
Adv. Sci. Technol. Res. J. 2017; 11(4):189-197
DOI: https://doi.org/10.12913/22998624/80319
 

Modelling of Conveyor Belt Passage by Driving Drum Using Finite Element Methods
Nikoleta Mikušová, Slavomir Millo
Adv. Sci. Technol. Res. J. 2017; 11(4):239-246
DOI: https://doi.org/10.12913/22998624/80311
 

Effect of Incidence Angle Varying from 0 rad to π/2 rad and Intensity of Radio Waves on the Performance of a Silicon Solar Cell
Issa Zerbo, Mamoudou Saria, Martial Zoungrana, Adama Ouedraogo, Dieudonné Joseph Bathiebo
Adv. Sci. Technol. Res. J. 2017; 11(4):68-75
DOI: https://doi.org/10.12913/22998624/80090
 

The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Michał Jakubowicz, Janusz Dereżyński
Adv. Sci. Technol. Res. J. 2017; 11(4):198-205
DOI: https://doi.org/10.12913/22998624/79830
 

Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Gurkan Irsel
Adv. Sci. Technol. Res. J. 2017; 11(4):83-96
DOI: https://doi.org/10.12913/22998624/77069
 

Peg-on-Hole: Fundamental Principles of Motion of a Peg Leaning on a Horizontal Hole Edge
Dmitry Simakov, Ludmila Chernyakhovskaya
Adv. Sci. Technol. Res. J. 2017; 11(4):49-59
DOI: https://doi.org/10.12913/22998624/77036
 

Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft
Łukasz Wójcik, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2017; 11(4):60-67
DOI: https://doi.org/10.12913/22998624/75966
 

Artificial Neural Network Modelling of Vibration in the Milling of AZ91D Alloy
Ireneusz Zagórski, Monika Kulisz, Aleksandra Semeniuk, Anna Malec
Adv. Sci. Technol. Res. J. 2017; 11(3):261-269
DOI: https://doi.org/10.12913/22998624/76546
 

Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Jan Nečas, Jakub Hlosta, David Žurovec, Martin Žídek, Jiří Rozbroj, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2017; 11(3):246-252
DOI: https://doi.org/10.12913/22998624/76100
 

An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Jan Buša, Jan Buša Jr,, Miroslav Dovica, Michal Fabián, Peter Izol, Stanislav Honus
Adv. Sci. Technol. Res. J. 2017; 11(3):223-232
DOI: https://doi.org/10.12913/22998624/76094
 

Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
Štefan Václav, Nikolay Sergeevich Sivtsev, Katarína Senderská
Adv. Sci. Technol. Res. J. 2017; 11(3):211-222
DOI: https://doi.org/10.12913/22998624/76093
 

Variable Valve Timing Scheduling in a 4-Stroke Internal Combustion Cylinder Utilizing Artificial Neural Networks
Sepehr Bapiri, Omid Chaghaneh, Hossein Ghomashi
Adv. Sci. Technol. Res. J. 2017; 11(3):114-121
DOI: https://doi.org/10.12913/22998624/75968
 

Modeling of Thermal Cycle CI Engine with Multi-Stage Fuel Injection
Arkadiusz Jamrozik, Wojciech Tutak, Adam Gnatowski, Renata Gnatowska, Jerzy Winczek, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2017; 11(3):179-186
DOI: https://doi.org/10.12913/22998624/75967
 

Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Gurkan Irsel
Adv. Sci. Technol. Res. J. 2017; 11(3):150-163
DOI: https://doi.org/10.12913/22998624/75887
 

Optimal Design of Fractional Sliding Mode Control Based on Multi-Objective Genetic Algorithm for a Two-Link Flexible Manipulator
Milad Pouya, Pooyan Vahidi Pashaki
Adv. Sci. Technol. Res. J. 2017; 11(3):56-65
DOI: https://doi.org/10.12913/22998624/74134
 

Analysis of Fiber Orientation in the Wood-Polymer Composites (WPC) on Selected Examples
Wiesław Jan Frącz, Grzegorz Janowski
Adv. Sci. Technol. Res. J. 2017; 11(3):122-129
DOI: https://doi.org/10.12913/22998624/71150
 

An Experimental Study on Wall Thickness Distribution in Thermoforming
Sencer Süreyya Karabeyoglu, Olcay Ekşi, Ertuğrul Selçuk Erdoğan
Adv. Sci. Technol. Res. J. 2017; 11(3):139-142
DOI: https://doi.org/10.12913/22998624/71148
 

FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy
Patryk Różyło, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2017; 11(3):94-101
DOI: https://doi.org/10.12913/22998624/70691
 

Effect of Eccentricity of Load on Critical Force of Thin-Walled Columns CFRP
Pawel Wysmulski, Jan Kral
Adv. Sci. Technol. Res. J. 2017; 11(3):109-113
DOI: https://doi.org/10.12913/22998624/70690
 

Application of System Modeling and Simulation of the Photovoltaic Production
Raja Glaa, Nafaa Jeddi, Najeh Lakhoua, Lilia El Amraoui
Adv. Sci. Technol. Res. J. 2017; 11(3):48-55
DOI: https://doi.org/10.12913/22998624/70179
 

DESIGN OF A CALCULATION FEM MODEL OF THE TEST STATIC STAND OF PIPE CONVEYOR FOR ANALYSIS OF CONTACT FORCES
Gabriel Fedorko, Vieroslav Molnar
Adv. Sci. Technol. Res. J. 2017; 11(2):220-225
DOI: https://doi.org/10.12913/22998624/71268
 

VALIDATION OF MOVEMENT OVER A BELT CONVEYOR DRUM
Jiří Rozbroj, Jan Nečas, Daniel Gelnar, Jakub Hlosta, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2017; 11(2):118-124
DOI: https://doi.org/10.12913/22998624/71183
 

NUMERICAL ANALYSIS OF THE STRESS-STRAIN STATE OF A ROPE STRAND WITH LINEAR CONTACT UNDER TENSION AND TORSION LOADING CONDITIONS
Evgenij Kalentev, Štefan Václav, Pavol Božek, Alexander Korshunov, Valerij Tarasov
Adv. Sci. Technol. Res. J. 2017; 11(2):231-239
DOI: https://doi.org/10.12913/22998624/71181
 

NUMERICAL INVESTIGATION OF INITIAL CONDITIONS INFLUENCE ON VALUE OF PRESSURE IMPULSE ACTING ON SPECIAL VEHICLE DURING ACCEPTANCE TESTING
Wiesław Barnat
Adv. Sci. Technol. Res. J. 2017; 11(2):125-132
DOI: https://doi.org/10.12913/22998624/71179
 

SIMULATION OF HELICAL GEAR FORMING OF AZ31 MAGNESIUM MATERIAL
Önder Ayer
Adv. Sci. Technol. Res. J. 2017; 11(2):187-191
DOI: https://doi.org/10.12913/22998624/70998
 

NUMERICAL THERMAL ANALYSIS OF A CAR BRAKING SYSTEM
Patryk Różyło
Adv. Sci. Technol. Res. J. 2017; 11(2):38-43
DOI: https://doi.org/10.12913/22998624/70693
 

OVERVIEW OF THE RESEARCH ON ROLL FORGING PROCESSES
Zbigniew Pater, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2017; 11(2):72-86
DOI: https://doi.org/10.12913/22998624/70645
 

MODELLING CHARACTERISTICS OF SPARK IGNITION ENGINE INJECTION SYSTEM
Mieczysław Dziubiński, Grzegorz Litak, Artur Drozd, Piotr Żukowicz
Adv. Sci. Technol. Res. J. 2017; 11(2):103-117
DOI: https://doi.org/10.12913/22998624/70565
 

AN APPROACH TO COMPUTER-AIDED RECONSTRUCTION OF MUSEUM EXHIBITS
Jacek Kęsik, Jerzy Montusiewicz, Rahim Kayumov
Adv. Sci. Technol. Res. J. 2017; 11(2):87-94
DOI: https://doi.org/10.12913/22998624/69419
 

ANALYSIS OF THERMAL PROPERTIES AND HEAT LOSS IN CONSTRUCTION AND ISOTHERMAL MATERIALS OF MULTILAYER BUILDING WALLS
Arkadiusz Urzędowski, Joanna Styczeń, Dorota Wójcicka-Migasiuk
Adv. Sci. Technol. Res. J. 2017; 11(2):33-37
DOI: https://doi.org/10.12913/22998624/69418
 

THE IMPACT OF THE ELEVATOR GUIDES CONTAMINATION ON THE BRAKING PROCESS DELAY FOR SELECTED PROGRESSIVE GEARS
Rafał Longwic, Kamil Szydło
Adv. Sci. Technol. Res. J. 2017; 11(2):1-7
DOI: https://doi.org/10.12913/22998624/68908
 

BUCKLING BEHAVIOUR OF SINGLE-WALLED CARBON NANOTUBES UNDER AXIAL LOADING
Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(1):208-211
DOI: https://doi.org/10.12913/22998624/68468
 

POSTBUCKLING BEHAVIOUR OF LAMINATED PLATES WITH A CUT-OUT
Katarzyna Falkowicz, Hubert Dębski
Adv. Sci. Technol. Res. J. 2017; 11(1):186-193
DOI: https://doi.org/10.12913/22998624/68283
 

THE EFFICIENCY OF THE GAVER-STEHFEST METHOD TO SOLVE OF ONE-DIMENSIONAL GAS FLOW MODEL
Małgorzata Wójcik, Mirosław Szukiewicz, Paweł Kowalik, Wiesław Próchniak
Adv. Sci. Technol. Res. J. 2017; 11(1):246-252
DOI: https://doi.org/10.12913/22998624/68138
 

NUMERICAL ANALYSIS OF THE CRITICAL STATE OF THIN-WALLED STRUCTURE WITH Z-PROFILE CROSS SECTION
Patryk Różyło, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2017; 11(1):194-200
DOI: https://doi.org/10.12913/22998624/67677
 

INFLUENCE OF THE PATH TYPE ON SELECTED TECHNOLOGICAL EFFECTS IN THE TROCHOIDAL MILLING
Kamil Waszczuk, Paweł Karolczak, Magdalena Wisniewska, Maceiej Kowalski
Adv. Sci. Technol. Res. J. 2017; 11(1):147-153
DOI: https://doi.org/10.12913/22998624/66501
 

APPLICATION OF ANSYS IN TEACHING FEM ON THE EXAMPLE OF A LOADED MARS ROVER CHASSIS
Ewa Łazuka, Małgorzata Łazuka
Adv. Sci. Technol. Res. J. 2016; 10(32):269-274
DOI: https://doi.org/10.12913/22998624/66682
 

MONITORING OF CONCRETE CURING IN EXTRADOSED BRIDGE SUPPORTED BY NUMERICAL SIMULATION
Aleksandra Mariak, Jacek Chróścielewski, Agnieszka Sabik, Błażej Meronk, Krzysztof Wilde
Adv. Sci. Technol. Res. J. 2016; 10(32):254-262
DOI: https://doi.org/10.12913/22998624/66186
 

SPECTRAL METHODS IN POLISH EMOTIONAL SPEECH RECOGNITION
Paweł Powroźnik, Dariusz Czerwiński
Adv. Sci. Technol. Res. J. 2016; 10(32):73-81
DOI: https://doi.org/10.12913/22998624/65138
 

THE IMPACT OF GEOMETRY ERRORS ON THE MOTION TRANSMISSION OF DUAL PATH GEARING
Jacek Pacana, Andrzej Pacana
Adv. Sci. Technol. Res. J. 2016; 10(32):94-100
DOI: https://doi.org/10.12913/22998624/65134
 

RELIABILITY EVALUATION OF RENEWABLE ENERGY-BASED POWER SYSTEM CONTAINING ENERGY STORAGE
Amir Ghaedi, Erfaneh Noroozi
Adv. Sci. Technol. Res. J. 2016; 10(32):198-205
DOI: https://doi.org/10.12913/22998624/65132
 

THEORETICAL AND EXPERIMENTAL ANALYSIS OF ROTARY COMPRESSION OF BALL PINS HOLLOW FORGINGS
Janusz Tomczak, Tomasz Bulzak, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2016; 10(32):109-117
DOI: https://doi.org/10.12913/22998624/65129
 

NUMERICAL MODELING OF SKEW ROLLING PROCESS OF TWIST DRILLS
Tomasz Adam Bulzak, Zbigniew Pater, Janusz Tomczak
Adv. Sci. Technol. Res. J. 2016; 10(32):124-131
DOI: https://doi.org/10.12913/22998624/65125
 

VISCOUS AND MAGNETIC FORCE ACTING IN A HIGH SPEED SOLENOID VALVE
Robert Goraj
Adv. Sci. Technol. Res. J. 2016; 10(32):132-143
DOI: https://doi.org/10.12913/22998624/65124
 

A MATHEMATICAL MODEL OF CHP 2000 TYPE PROGRESSIVE GEAR
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2016; 10(32):150-155
DOI: https://doi.org/10.12913/22998624/65120
 

ANALYSIS OF PRINTING PARAMETERS FOR PRODUCTION OF COMPONENTS WITH ​EASY3DMAKER​ PRINTER
Alexander Rengevič, Mikuláš Fúra, Nadežda Čuboňová
Adv. Sci. Technol. Res. J. 2016; 10(32):1-8
DOI: https://doi.org/10.12913/22998624/65114
 

TASKRADAR: TASK VISUALISATION AND MONITORING WITHIN AUTOMOTIVE PRODUCT DEVELOPMENT LIFECYCLE USING SEMANTIC TECHNOLOGIES
Selver Softic, Manfred Rosenberger, Ioan Turcin, Alexander Stocker
Adv. Sci. Technol. Res. J. 2016; 10(31):124-129
DOI: https://doi.org/10.12913/22998624/64072
 

SIMULATION OF COMPONENTS MIXING IN ORDER TO DETERMINE WORKING BODIES RATIONAL PARAMETERS
Igor Stadnyk, Tatiana Vitenko, Paweł Droździel, Andrij Derkach
Adv. Sci. Technol. Res. J. 2016; 10(31):130-138
DOI: https://doi.org/10.12913/22998624/64068
 

PROPOSAL OF DEVICE FOR MONITORING OF EDUCATIONAL MACHINE TOOLS
Miroslav Císar, Ivan Kuric, Nadežda Čuboňová, Štefan Vlček
Adv. Sci. Technol. Res. J. 2016; 10(31):80-86
DOI: https://doi.org/10.12913/22998624/64067
 

STRUCTURAL ANALYSIS OF ARTICULAR CARTILAGE OF THE HIP JOINT USING FINITE ELEMENT METHOD
Robert Karpiński, Łukasz Jaworski, Jarosław Zubrzycki
Adv. Sci. Technol. Res. J. 2016; 10(31):240-246
DOI: https://doi.org/10.12913/22998624/64064
 

EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE COMPRESSION OF A THIN-WALLED COMPOSITE PLATE
Katarzyna Falkowicz, Przemysław Mazurek, Patryk Różyło, Paweł Wysmulski, Wojciech Smagowski
Adv. Sci. Technol. Res. J. 2016; 10(31):177-184
DOI: https://doi.org/10.12913/22998624/64063
 

A SCHEME FOR TEMPLATE SECURITY AT FEATURE FUSION LEVEL IN MULTIMODAL BIOMETRIC SYSTEM
Arvind Selwal, Sunil Kumar Gupta, Surender Kumar
Adv. Sci. Technol. Res. J. 2016; 10(31):23-30
DOI: https://doi.org/10.12913/22998624/64062
 

THE APPLICATION OF MASSING HANDLING THEORY FOR EVALUATION OF THE APPLICATION OF WHARVES AND LOADING FACILITIES IN THE MARITIME PORT
Zbigniew Matuszak, Sylwia Bundz, Marek Jaśkiewicz, Józef Stokłosa, Paweł Posuniak
Adv. Sci. Technol. Res. J. 2016; 10(31):281-288
DOI: https://doi.org/10.12913/22998624/64017
 

DEVELOPMENT AND IMPLEMENTATION OF HASH FUNCTION FOR GENERATING HASHED MESSAGE
Amir Ghaeedi, Erfaneh Noroozi
Adv. Sci. Technol. Res. J. 2016; 10(31):31-39
DOI: https://doi.org/10.12913/22998624/64016
 

MODAL ANALYSIS OF REAL TIMBER FRAME HOUSES WITH DIFFERENT INSULATION MATERIALS
Marcin Szczepański, Wojciech Migda, Robert Jankowski
Adv. Sci. Technol. Res. J. 2016; 10(31):215-221
DOI: https://doi.org/10.12913/22998624/64014
 

NUMERICAL ANALYSIS OF THE BEHAVIOR OF COMPRESSED THIN-WALLED ELEMENTS WITH HOLES
Patryk Różyło, Katarzyna Wrzesińska
Adv. Sci. Technol. Res. J. 2016; 10(31):199-206
DOI: https://doi.org/10.12913/22998624/64006
 

AN INNOVATIVE METHOD FOR FORMING BALLS FROM SCRAP RAIL HEADS
Zbigniew Pater, Janusz Tomczak, Tomasz Bulzak
Adv. Sci. Technol. Res. J. 2016; 10(31):151-157
DOI: https://doi.org/10.12913/22998624/64005
 

DESIGNING HYDRAULIC AIR CHAMBER IN WATER TRANSMISSION SYSTEMS USING GENETIC ALGORITHM
Abdorahim Jamal, Mohsen Najarchi, S. Mohammad Mehdi Najafi Zade
Adv. Sci. Technol. Res. J. 2016; 10(31):1-7
DOI: https://doi.org/10.12913/22998624/62119
 

SEISMIC BEHAVIOR OF BURIED PIPELINES SUBJECTED TO NORMAL FAULT MOTION
Seyyed Ali Sabet, Seyyed Mohammad Reza Nayyeri
Adv. Sci. Technol. Res. J. 2016; 10(30):84-88
DOI: https://doi.org/10.12913/22998624/62827
 

EEULA: AN ENERGY-AWARE EVENT-DRIVEN UNICAST ALGORITHM FOR WIRELESS SENSOR NETWORK BY LEARNING AUTOMATA
Ali Azimi Kashani, Ali Mohamad Monjezi Noori
Adv. Sci. Technol. Res. J. 2016; 10(30):9-18
DOI: https://doi.org/10.12913/22998624/62826
 

A WAVELET-BASED MODEL FOR FOVEAL DETECTION OF SPATIAL CONTRAST WITH FREQUENCY DEPENDENT APERTURE EFFECT
Hamed Hooshangnejad, Shahriar Gharibzadeh, Farzad Towhidkhah
Adv. Sci. Technol. Res. J. 2016; 10(30):51-68
DOI: https://doi.org/10.12913/22998624/62771
 

COOPERATIVE COMMUNICATION WITH SCHEME SELECTION
Seyed Vahid Mortezavi Zadeh, Mmehdi Fartash
Adv. Sci. Technol. Res. J. 2016; 10(30):19-23
DOI: https://doi.org/10.12913/22998624/62733
 

FUZZY BASED TRUST MANAGEMENT SYSTEM FOR CLOUD ENVIRONMENT
Sunil Kumar, Sumit Mittal, Manpreet Singh
Adv. Sci. Technol. Res. J. 2016; 10(30):32-37
DOI: https://doi.org/10.12913/22998624/62703
 

ANALYSIS OF HELICAL ROLLING PROCESS OF BALLS FORMED FROM A HEAD OF A SCRAPPED RAIL
Zbigniew Pater
Adv. Sci. Technol. Res. J. 2016; 10(30):110-114
DOI: https://doi.org/10.12913/22998624/62702
 

THE EFFECT OF FLY ASH ON FLEXURAL CAPACITY CONCRETE BEAMS
Amir Mohammad Amiri, Amin Olfati, Shima Najjar, Peyman Beiranvand, M.H. Naseri Fard
Adv. Sci. Technol. Res. J. 2016; 10(30):89-95
DOI: https://doi.org/10.12913/22998624/62630
 

DESIGNING A PID CONTROLLER TO CONTROL A FUEL CELL VOLTAGE USING THE IMPERIALIST COMPETITIVE ALGORITHM
Mohammad Marefati, Ali Shamel, Reza Alayi, Babak Gholaminia, Hamed Rohi
Adv. Sci. Technol. Res. J. 2016; 10(30):176-181
DOI: https://doi.org/10.12913/22998624/62629
 

THEORETICAL AND EXPERIMENTAL ANALYSIS OF LOADING IMPACT FROM THE PROGRESSIVE GEAR ON THE LIFT BRAKING DISTANCE WITH THE USE OF THE FREE FALL METHOD
Paweł Lonkwic, Patryk Różyło
Adv. Sci. Technol. Res. J. 2016; 10(30):103-109
DOI: https://doi.org/10.12913/22998624/62628
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top