PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access
Topic Computational Methods in Mechanical Engineering
 

Accelerations caused by underwater explosions on the naval gun foundation
Bogdan Szturomski, Radosław Kiciński, Stanisław Milewski
Adv. Sci. Technol. Res. J. 2023;
 

Fractal Dimension as Robust Estimate of Low Carbon Steels Hardness
Krzysztof Zając, Karolina Płatek, Paweł Wachel, Leszek Łatka
Adv. Sci. Technol. Res. J. 2022; 16(5):335–344
DOI: https://doi.org/10.12913/22998624/155799
 

FEM Simulation of Different Engine Mount Models in an Aircraft Piston Diesel Engine
Paweł Magryta, Konrad Pietrykowski, Piotr Borowiec
Adv. Sci. Technol. Res. J. 2022; 16(5):230–241
DOI: https://doi.org/10.12913/22998624/155092
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242–249
DOI: https://doi.org/10.12913/22998624/154926
 

The Effect of Undercut Anchor Diameter on the Rock Failure Cone Area in Pullout Tests
Józef Jonak, Robert Karpiński, Andrzej Wójcik, Michał Siegmund
Adv. Sci. Technol. Res. J. 2022; 16(5):261–270
DOI: https://doi.org/10.12913/22998624/154894
 

Impact of T-Splitter on the Laminar Flow Field Around Cylinder Pier
Rafi Mohammed Qasim, Safaa Hameed Faisal, Tahseen Ali Jabbar
Adv. Sci. Technol. Res. J. 2022; 16(5):202–215
DOI: https://doi.org/10.12913/22998624/154795
 

An Elastic-Plastic Analysis of Polycrystalline Structure Using Crystal Plasticity Modelling – Theory and Benchmark Tests
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2022; 16(5):163–177
DOI: https://doi.org/10.12913/22998624/154025
 

Construction and Verification for Metrological Properties of the Prototype Magnetic Head for Nondestructive Testing of Lift Guide Rail Wear under Test Conditions
Tomasz Krakowski, Hubert Ruta, Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2022; 16(5):28–39
DOI: https://doi.org/10.12913/22998624/153045
 

Modeling of a Primary Air Distribution in a Plenum Chamber of the 700 MWth Circulating Fluidized Bed Boiler
Paweł Mirek
Adv. Sci. Technol. Res. J. 2022; 16(5):86–99
DOI: https://doi.org/10.12913/22998624/152673
 

Numerical Simulation of the Airport Evacuation Process under Fire Conditions
Michał Jasztal, Łukasz Omen, Maciej Kowalski, Waldemar Jaskółowski
Adv. Sci. Technol. Res. J. 2022; 16(2):249–261
DOI: https://doi.org/10.12913/22998624/147280
 

The Influence of Composite Lay-Up and the Shape of the Closed Section on the Stability of the Structure
Błażej Czajka, Patryk Różyło
Adv. Sci. Technol. Res. J. 2022; 16(2):216–224
DOI: https://doi.org/10.12913/22998624/147129
 

The Use of Fuzzy Evaluation and Radical Cut-Off Strategy to Improve Apictorial Puzzle Assembly with Exhaustive Search Algorithm Performance
Stanisław Piotr Skulimowski, Jerzy Montusiewicz, Marcin Badurowicz
Adv. Sci. Technol. Res. J. 2022; 16(2):179–187
DOI: https://doi.org/10.12913/22998624/147024
 

Experimental Analysis of the Post-Buckling Behaviour of Compressed Stiffened Panel with Refill Friction Stir Spot Welded and Riveted Stringers
Andrzej Kubit, Łukasz Święch, Tomasz Trzepieciński, Koen Faes
Adv. Sci. Technol. Res. J. 2022; 16(2):159–167
DOI: https://doi.org/10.12913/22998624/146899
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131–140
DOI: https://doi.org/10.12913/22998624/146765
 

Investigation of the Effect of Young’s Modulus on the Contact Strength of Metal Polymer Plain Bearings
Myron Chernets, Mykhaylo Pashechko, Anatolii Kornienko, Jarosław Borc, Roman Zakhariia
Adv. Sci. Technol. Res. J. 2022; 16(2):67–73
DOI: https://doi.org/10.12913/22998624/145964
 

Intelligent Visual Quality Control System Based on Convolutional Neural Networks for Holonic Shop Floor Control of Industry 4.0 Manufacturing Systems
Przemysław Oborski, Przemysław Wysocki
Adv. Sci. Technol. Res. J. 2022; 16(2):89–98
DOI: https://doi.org/10.12913/22998624/145503
 

Mathematical Modeling of Stress in Circuit Cards Represented by Mechanical Oscillatory Systems
Igor Kovtun, Andrii Goroshko, Svitlana Petrashchuk
Adv. Sci. Technol. Res. J. 2022; 16(1):303–315
DOI: https://doi.org/10.12913/22998624/144574
 

The Influence of Composite Lay-Up on the Stability of a Structure with Closed Section
Patryk Różyło, Hubert Dębski
Adv. Sci. Technol. Res. J. 2022; 16(1):260–265
DOI: https://doi.org/10.12913/22998624/145156
 

Implementation and Analysis of Mathematical Modeled Drive Train System in Type III Wind Turbines Using Computational Fluid Dynamics
Subash Ranjan Kabat, Chinmoy Kumar Panigrahi, Bibhu Prasad Ganthia, Subrat Kumar Barik, Byamakesh Nayak
Adv. Sci. Technol. Res. J. 2022; 16(1):180–189
DOI: https://doi.org/10.12913/22998624/144753
 

Effect of Nanoindentation Rate on Plastic Deformation in Cu Thin Films
Dariusz Chocyk, Tomasz Zientarski
Adv. Sci. Technol. Res. J. 2022; 16(1):170–179
DOI: https://doi.org/10.12913/22998624/142775
 

Response Time Estimation in Robotics Using Hierarchical Performance Modeling Approach
Ahmed Alsheikhy, Muhannad Almutiry
Adv. Sci. Technol. Res. J. 2021; 15(4):14–20
DOI: https://doi.org/10.12913/22998624/142655
 

Sensitivity Analysis for Influence Parameters of Rail Corrugation Characteristics in Metro Straight Section
Zhiqiang Wang, Zhenyu Lei
Adv. Sci. Technol. Res. J. 2021; 15(4):110–117
DOI: https://doi.org/10.12913/22998624/142034
 

A Semi-Empirical Model of the Wheel-Soil System
Piotr Tarkowski
Adv. Sci. Technol. Res. J. 2021; 15(4):93–100
DOI: https://doi.org/10.12913/22998624/142011
 

A Model for Planning Wagonload Freight Transport Under Relative Uncertainty
Tadeusz Cisowski, Łukasz Wojciechowski, Jarosław Zubrzycki, Arkadiusz Małek
Adv. Sci. Technol. Res. J. 2021; 15(4):332–341
DOI: https://doi.org/10.12913/22998624/141963
 

Simulation of the Griffith's Crack Using Own Method of Predicting the Crack Propagation
Jerzy Podgórski, Jakub Gontarz
Adv. Sci. Technol. Res. J. 2021; 15(4):1–13
DOI: https://doi.org/10.12913/22998624/141908
 

Digital Shape and Geometric Dimension Analysis of Polymer Fuel Tanks
Jerzy Józwik, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2021; 15(4):38–48
DOI: https://doi.org/10.12913/22998624/141649
 

Comparative Study on Path Interval and Two Tool Condition Parameters in Ball and Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2021; 15(4):311–320
DOI: https://doi.org/10.12913/22998624/141258
 

Selection of the Friction Model for Numerical Analyses of the Impact of Longitudinal Vibration on Stick-Slip Movement
Marta Rybkiewicz, Mariusz Leus
Adv. Sci. Technol. Res. J. 2021; 15(3):277–287
DOI: https://doi.org/10.12913/22998624/141184
 

Influence of Axial Compressor Model Simplification and Mesh Density on Surge Margin Evaluation
Rafał Muchowski, Sławomir Maciej Gubernat
Adv. Sci. Technol. Res. J. 2021; 15(3):243–253
DOI: https://doi.org/10.12913/22998624/140541
 

Study on Tool Condition Parameters Intended for Smart Tool Management in Filleted End Milling
Tsutomu Sekine
Adv. Sci. Technol. Res. J. 2021; 15(3):108–116
DOI: https://doi.org/10.12913/22998624/138532
 

Calculation of Contact Pressures in Cylindrical Metal-Polymer Sliding Guides
Myron Chernets, Mykhaylo Pashechko, Anatolii Kornienko, Anatoly Ishchenko
Adv. Sci. Technol. Res. J. 2021; 15(3):30–33
DOI: https://doi.org/10.12913/22998624/137965
 

Study of Contact Pressures in Total Hip Replacement
Myron Czerniec, Jarosław Zubrzycki
Adv. Sci. Technol. Res. J. 2021; 15(2):176–183
DOI: https://doi.org/10.12913/22998624/136178
 

Application of Electronic Speckle Pattern Interferometry for Evaluation of the Static Stiffness of a Complex Orthopedic Implant
Piotr Mrozek, Piotr Borkowski
Adv. Sci. Technol. Res. J. 2021; 15(2):39–48
DOI: https://doi.org/10.12913/22998624/135805
 

The Optimization of PHBV-hemp Fiber Biocomposite Manufacturing Process on the Selected Example
Wiesław Jan Frącz, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):127–137
DOI: https://doi.org/10.12913/22998624/135399
 

Enhancement of Aerodynamic Efficiency of Aerofoil Using Improved Blowing and Suction System
K. Balaji, G. Jims John Wessley
Adv. Sci. Technol. Res. J. 2021; 15(2):116–126
DOI: https://doi.org/10.12913/22998624/134642
 

Selected Methods of Obtaining Adequate Forms of Deformation of Supercritical Thin-Walled Flat Plates
Tomasz Kopecki
Adv. Sci. Technol. Res. J. 2021; 15(2):184–190
DOI: https://doi.org/10.12913/22998624/134284
 

Optimization of a Jet Engine Compressor Disc with Application of Artificial Neural Networks for Calculations Related to Time and Mass Criteria
Rafał Kieszek, Adam Kozakiewicz, Robert Rogólski
Adv. Sci. Technol. Res. J. 2021; 15(2):208–218
DOI: https://doi.org/10.12913/22998624/134061
 

Modeling of Compression Test of Natural Fiber Composite Sections
Grażyna Ryzińska, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):138–147
DOI: https://doi.org/10.12913/22998624/133486
 

Experimental Verification of Standard Recommendations for Estimating the Load-Carrying Capacity of Undercut Anchors in Rock Material
Józef Jonak, Robert Karpiński, Michał Siegmund, Anna Machrowska, Dariusz Prostański
Adv. Sci. Technol. Res. J. 2021; 15(1):230–244
DOI: https://doi.org/10.12913/22998624/132279
 

The Coupled Eulerian-Lagrangian Analysis of the KOBO Extrusion Process
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2021; 15(1):197–208
DOI: https://doi.org/10.12913/22998624/131663
 

Techniques for Production Quality Control in the Global Company
Naqib Daneshjo, Peter Malega, Peter Drábik
Adv. Sci. Technol. Res. J. 2021; 15(1):174–183
DOI: https://doi.org/10.12913/22998624/131558
 

Computational Methods of the Identification of Chaboche Isotropic-Kinematic Hardening Model (CIKH) Parameters Derived From the Cyclic Loading Tests
Marta Wójcik, Andrzej Gontarz, Andrzej Skrzat, Grzegorz Winiarski
 

Neural Network Based Model for Drone Detection with Acoustic Measurements in an Anechoic Chamber
Waldemar Paszkowski, Arkadiusz Gola, Antoni Świć
 

Effect of Friction on Buckling Behavior in Shallow Spherical to Hemispherical Shells in Contact with Rigid Boundaries under Uniform External Pressure
XuanCuong NGUYEN, Yoshio ARAI, Wakako ARAKI
 

Prediction of Size of Iron Spherules Formed from Melted Micrometeoroids
Wieslaw Z. Polak
Adv. Sci. Technol. Res. J. 2023; 17(6):388–393
DOI: https://doi.org/10.12913/22998624/175312
 

Computational and Experimental Investigation of Inert Gas Flow Field in Direct Metal Laser Melting Printer Build Chamber
Paweł Czekałowski, Wit Stryczniewicz, Paweł Żuk, Krzysztof Panna, Paweł Borkowski, Michał Bujak, Tomasz Iglewski
Adv. Sci. Technol. Res. J. 2023; 17(6):378–387
DOI: https://doi.org/10.12913/22998624/174955
 

Measurements of Tensile Strength and Elongation of 3D Printed Polylactide Solids Produced with Different Temperatures of Extruder Using Coordinate Measuring Technique and Finite Element Method
Anna Magdalena Gaweł, Ksenia Ostrowska, Aleksandra Lisowska
Adv. Sci. Technol. Res. J. 2023; 17(6):356–366
DOI: https://doi.org/10.12913/22998624/174907
 

Buckling of Compressed Thin-Walled Composite Structures with Closed Sections
Patryk Różyło, Kuba Rosłaniec, Michał Kuciej
Adv. Sci. Technol. Res. J. 2023; 17(6):63–72
DOI: https://doi.org/10.12913/22998624/174193
 

Analysis of the Triggering Mechanism of the Square Thin-Walled Absorber
Michał Rogala, Jakub Gajewski
Adv. Sci. Technol. Res. J. 2023; 17(6):206–216
DOI: https://doi.org/10.12913/22998624/173215
 

Numerical Study of the Effect of the Trailing-Edge Devices (Gurney Flap and Divergent Trailing-edge Flap) on the Aerodynamic Characteristics of an Airfoil in Transonic Flow for Drone Applications
Malgorzata Kmiotek, Adrian Kordos, Adam Piszczatowski, Adam Zaremba
Adv. Sci. Technol. Res. J. 2023; 17(5):248–259
DOI: https://doi.org/10.12913/22998624/172565
 

Prediction of Waviness Values in Skew Rolling Using Machine Learning Methods
Konrad Lis, Zbigniew Pater, Janusz Tomczak, Tomasz Adam Bulzak, Tomasz Kusiak
Adv. Sci. Technol. Res. J. 2023; 17(5):350–359
DOI: https://doi.org/10.12913/22998624/172338
 

Improving the Calibration of Surface Time Domain Reflectometry Sensors for Moisture Evaluation of Building Materials Using the Analysis of Covariance Method
Anna Futa, Magdalena Jastrzębska, Magdalena Paśnikowska-Łukaszuk, Elżbieta Wośko, Zbigniew Suchorab
Adv. Sci. Technol. Res. J. 2023; 17(5):326–336
DOI: https://doi.org/10.12913/22998624/172010
 

Analysis of the Possibility of Using Neural Networks to Monitor the Technical Efficiency of Diesel Engines During Operation
Karol Tucki, Olga A. Orynycz, Antoni Świć, Andrzej Wasiak, Remigiusz Mruk, Akadiusz Gola
Adv. Sci. Technol. Res. J. 2023; 17(6):1–15
DOI: https://doi.org/10.12913/22998624/172003
 

Industrial Application of Surface Crack Detection in Sheet Metal Stamping Using Shift-and-Add Speckle Imaging
Sławomir Świłło, Robert Cacko
Adv. Sci. Technol. Res. J. 2023; 17(5):220–235
DOI: https://doi.org/10.12913/22998624/171811
 

Experimental Investigation on an Algorithm for Testing the Quality of Powder Distribution During 3D Printing Process
Marcin Korzeniowski, Aleksandra Małachowska, Mateusz Biały, Maria Kanczewska, Michał Tkaczyk, Krzysztof Grajczyk
Adv. Sci. Technol. Res. J. 2023; 17(5):289–301
DOI: https://doi.org/10.12913/22998624/171809
 

Impact of the Development of the Design of Firefighter Helmets on the Mechanical Shock Absorption Capacity
Agata Walczak, Daniel Pieniak, Paweł Lonkwic, Włodzimierz Kupicz, Szymon Ptak, Piotr Piątek, Wiktor Wąsik, Artur Renkas
Adv. Sci. Technol. Res. J. 2023; 17(6):171–184
DOI: https://doi.org/10.12913/22998624/171753
 

Estimating the Size of a Crater after an Underwater Explosion
Radosław Kiciński
Adv. Sci. Technol. Res. J. 2023; 17(5):187–194
DOI: https://doi.org/10.12913/22998624/171503
 

Numerical Analysis of Lamb Wave Propagation in Composite Plate with Different Fiber Orientation Angles – Acoustic Emission Approach
Jakub Rzeczkowski
Adv. Sci. Technol. Res. J. 2023; 17(5):104–113
DOI: https://doi.org/10.12913/22998624/171452
 

A New Effective Algorithm for Mechanical Assembly Sequence Planning
Michał Sąsiadek, Maciej Niedziela, Waldemar Woźniak, Tomasz Jachowicz, Nikoleta Mikušová
Adv. Sci. Technol. Res. J. 2023; 17(5):56–67
DOI: https://doi.org/10.12913/22998624/171271
 

Investigation of Multi-Cold Rolling Passes on Mechanical Characteristics and Surface Quality of AlCuV Alloy
Nabeel Abu Shaban, Safwan M Al-Qawabah, Hashem S. Alkhaldi
Adv. Sci. Technol. Res. J. 2023; 17(5):68–76
DOI: https://doi.org/10.12913/22998624/171265
 

Conception of a Durability Prediction Method for a Metal-elastomer Machine Mount
Wojciech Sikora, Robert Pilch, Maksymilian Smolnik
Adv. Sci. Technol. Res. J. 2023; 17(5):28–40
DOI: https://doi.org/10.12913/22998624/170978
 

Evaluation of Density Fields of Numerical Analysis Output of Solid Carbon Dioxide Extrusion Process
Jan Górecki, Tymoteusz Lindner, Krzysztof Wałęsa
Adv. Sci. Technol. Res. J. 2023; 17(4):235–248
DOI: https://doi.org/10.12913/22998624/170237
 

REDUCE – A Python Module for Reducing Inconsistency in Pairwise Comparison Matrices
Paweł Kuraś, Dominik Strzalka, Bartosz Kowal, Jiří Mazurek
Adv. Sci. Technol. Res. J. 2023; 17(4):227–234
DOI: https://doi.org/10.12913/22998624/170187
 

The Influence of Light Intensity on the Operation of Vision System in Collaborative Robot
Adrian Bochen, Bartłomiej Ambrożkiewicz
Adv. Sci. Technol. Res. J. 2023; 17(4):206–214
DOI: https://doi.org/10.12913/22998624/169884
 

Experimental-Numerical Analysis of a Flat Plate Subjected to Shearing and Manufactured by Incremental Techniques
Tomasz Kopecki, Łukasz Święch
Adv. Sci. Technol. Res. J. 2023; 17(4):179–188
DOI: https://doi.org/10.12913/22998624/169740
 

Study to Determine the Effect of Blade Distance and Chain Speed on the Productivity of Trench Excavators Using Taguchi Method
Duong Truong Giang
Adv. Sci. Technol. Res. J. 2023; 17(4):139–149
DOI: https://doi.org/10.12913/22998624/169427
 

Analysis of Thin-Walled Elements, with Ribbed Stiffeners, in the State of Post-Critical Deformations
Przemysław Alfred Mazurek
Adv. Sci. Technol. Res. J. 2023; 17(4):61–69
DOI: https://doi.org/10.12913/22998624/168739
 

Application of Laboratory Tests in Numerical Analysis for Exhaust Emissions in Business Jet Engines
Adam Kozakiewicz, Aleksandra Kołodziejska, Rafał Kieszek
Adv. Sci. Technol. Res. J. 2023; 17(4):21–35
DOI: https://doi.org/10.12913/22998624/167456
 

Method of Selecting a Rational Strategy in Sustainable Friction Drilling
Roman Stryczek, Paweł Błaszczak
Adv. Sci. Technol. Res. J. 2023; 17(3):320–332
DOI: https://doi.org/10.12913/22998624/167455
 

Validation of Extension-Bending and Extension-Twisting Coupled Laminates in Elastic Element
Katarzyna Falkowicz
Adv. Sci. Technol. Res. J. 2023; 17(3):309–319
DOI: https://doi.org/10.12913/22998624/167451
 

Constraint Programming for Flexible Flow Shop Scheduling Problem with Repeated Jobs and Repeated Operations
Kateryna Czerniachowska, Radosław Wichniarek, Krzysztof Żywicki
Adv. Sci. Technol. Res. J. 2023; 17(3):280–293
DOI: https://doi.org/10.12913/22998624/166588
 

Bayesian Regression Based Approach for Beam Deflection Estimation
Raed Sabri Batbooti, Bassam A. Mohammed, Tahseen Ali Jabbar, Safaa H. Faisal
Adv. Sci. Technol. Res. J. 2023; 17(3):206–213
DOI: https://doi.org/10.12913/22998624/166313
 

Combining the Technology of Long-Range Laser 3D Scanners and Structured Light Handheld 3D Scanners to Digitize Large-sized Objects
Ignacy Karol Lipowiecki, Witold Rządkowski, Wojciech Zapał, Michał Piotr Kowalik
Adv. Sci. Technol. Res. J. 2023; 17(3):196–205
DOI: https://doi.org/10.12913/22998624/166186
 

Study of Contact Parameters in Metal-On-Plastic Hip Endoprosthesis with the Analytical-Numerical Method of Contact Mechanics
Myron Chernets, Jarosław Zubrzycki
Adv. Sci. Technol. Res. J. 2023; 17(3):145–153
DOI: https://doi.org/10.12913/22998624/165914
 

New Methodology for Predicting the Cracking Phenomenon in the Radial Extrusion Process of Hollow Parts with a Flange
Grzegorz Winiarski, Grzegorz Samołyk
Adv. Sci. Technol. Res. J. 2023; 17(3):64–72
DOI: https://doi.org/10.12913/22998624/163108
 

Analysis and Improvement of an Industrial Process of Hot Die Forging of an Elongated Forging Tipped with a Joggle with the Use of Numerical Simulation Results
Marek Robert Hawryluk, Marcin Rychlik, Sławomir Polak, Maciej Zwierzchowski, Łukasz Dudkiewicz, Jan Marzec, Paweł Jabłoński
Adv. Sci. Technol. Res. J. 2023; 17(2):192–205
DOI: https://doi.org/10.12913/22998624/162158
 

Experimental Research in the Aspect of Determining the Mechanical and Strength Properties of the Composite Material Made of Carbon-Epoxy Composite
Patryk Różyło, Wojciech Smagowski, Jakub Paśnik
Adv. Sci. Technol. Res. J. 2023; 17(2):232–246
DOI: https://doi.org/10.12913/22998624/161598
 

Determination of Critical Damage Function Values of CW008A Copper and S355 Steel in Tensile and Torsion Tests
Patrycja Walczuk-Gągała, Zbigniew Pater, Łukasz Wójcik, Konrad Lis
Adv. Sci. Technol. Res. J. 2023; 17(2):173–180
DOI: https://doi.org/10.12913/22998624/161053
 

The Computational Method of Predicting the Crack Path in Confrontation with Laboratory Tests
Jakub Gontarz, Jerzy Podgórski
Adv. Sci. Technol. Res. J. 2023; 17(2):90–110
DOI: https://doi.org/10.12913/22998624/161007
 

The Effect of Fiber Arrangement in the Bio-Laminate and Geometric Parameters on the Stability of Thin-Walled Angle Column Under Axial Compression
Jarosław Gawryluk
Adv. Sci. Technol. Res. J. 2023; 17(1):150–159
DOI: https://doi.org/10.12913/22998624/158854
 

Analysis of Torsional Strength of PA2200 Material Shape Additively with the Selective Laser Sintering Technology
Jacek Bernaczek, Mariusz Dębski, Małgorzata Gontarz, Roman Grygoruk, Jerzy Józwik, Bogdan Kozik, Piotr Mikulski
Adv. Sci. Technol. Res. J. 2023; 17(2):12–24
DOI: https://doi.org/10.12913/22998624/158838
 

Selected Aspects of 3D Printing for Emergency Replacement of Structural Elements
Krzysztof Jasiński, Lech Murawski, Marcin Kluczyk, Adam Muc, Adam Szeleziński, Tomasz Muchowski, Marek Chodnicki
Adv. Sci. Technol. Res. J. 2023; 17(1):274–289
DOI: https://doi.org/10.12913/22998624/158486
 

Using Inconsistency Reduction Algorithms in Comparison Matrices to Improve the Performance of Generating Random Comparison Matrices with a Given Inconsistency Coefficient Range
Paweł Kuraś, Alicja Gerka
Adv. Sci. Technol. Res. J. 2023; 17(1):222–229
DOI: https://doi.org/10.12913/22998624/158019
 

Temperature and Die Angular Effect on Tensile Strength, Hardness, Extrusion Load and Flow Stress in Aluminum 6063 Processed by Equal Channel Angular Extrusion Method
Temitayo M. Azeez, Lateef O. Mudashiru, Tesleem B. Asafa, Saheed Akande, Omolayo M. Ikumapayi, Joseph F. Kayode, Ikenna D. Uchegbu, Sunday A. Afolalu
Adv. Sci. Technol. Res. J. 2023; 17(1):345–353
DOI: https://doi.org/10.12913/22998624/158018
 

Supporting Welding Work in the Aspect of Increasing Production Process Efficiency
Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2023; 17(1):8–14
DOI: https://doi.org/10.12913/22998624/157418
 

Dimensional-Shape Verification of a Selected Part of Machines Manufactured by Additive Techniques
Jacek Bernaczek, Grzegorz Budzik, Tomasz Dziubek, Łukasz Przeszłowski, Kinga Wójciak
Adv. Sci. Technol. Res. J. 2023; 17(1):46–57
DOI: https://doi.org/10.12913/22998624/157289
 

Application of Geometric Simulation for Determination of Dynamic Undeformed Chip Thickness in Milling
Sebastian Bombiński, Krzysztof Jemielniak
Adv. Sci. Technol. Res. J. 2023; 17(1):173–181
DOI: https://doi.org/10.12913/22998624/157114
 

Usage of Cold Forcing Method for a Gas Turbine Engine of Supersonic Transport
Viktors Gutakovskis, Vladimirs Gudakovskis, Ilmars Blumbergs, Elina Sarma
Adv. Sci. Technol. Res. J. 2023; 17(1):267–273
DOI: https://doi.org/10.12913/22998624/156985
 

Research of Speed Parameters of the Ring Rolling Process
Piotr Surdacki, Andrzej Gontarz, Grzegorz Winiarski, Łukasz Wójcik, Sylwia Wiewiórowska
Adv. Sci. Technol. Res. J. 2022; 16(6):251–257
DOI: https://doi.org/10.12913/22998624/156816
 

Influence of Composite Lay-Up on the Stability of Channel-Section Profiles Weakened by Cut-Outs – A Numerical Investigation
Katarzyna Falkowicz, Paolo Sebastiano Valvo
Adv. Sci. Technol. Res. J. 2023; 17(1):108–115
DOI: https://doi.org/10.12913/22998624/156635
 

Application of the Acoustic Emission Technique for Damage Identification in the Fiber Reinforced Polymer Composites
Sylwester Samborski, Izabela Korzec
Adv. Sci. Technol. Res. J. 2023; 17(1):210–221
DOI: https://doi.org/10.12913/22998624/156602
 

Case Study on the Influence of Forming Parameters on Complex Shape Part Deformation
Paweł Bałon, Bartłomiej Kiełbasa, Łukasz Kowalski, Robert Smusz
Adv. Sci. Technol. Res. J. 2022; 16(6):204–213
DOI: https://doi.org/10.12913/22998624/156464
 

Influence of Physical and Constructive Parameters on Durability of Sieves of Grain Cleaning Machines
Serhii Kharchenko, Farida Kharchenko, Sylwester Samborski, Jakub Paśnik, Stepan Kovalyshyn, Kiril Sirovitskiy
Adv. Sci. Technol. Res. J. 2022; 16(6):156–165
DOI: https://doi.org/10.12913/22998624/156128
 

Identification of Tool Wear During Cast Iron Drilling Using Machine Learning Methods
Paweł Twardowski, Maciej Tabaszewski, Agata Felusiak-Czyryca, Piotr Kieruj, Martyna Wiciak-Pikuła, Jakub Czyżycki
Adv. Sci. Technol. Res. J. 2022; 16(6):126–139
DOI: https://doi.org/10.12913/22998624/155985
 

Derivation of Symmetric Secant Stiffness Matrices for Nonlinear Finite Element Analysis
Paolo Sebastiano Valvo
Adv. Sci. Technol. Res. J. 2022; 16(6):118–125
DOI: https://doi.org/10.12913/22998624/155942
 

Effect of Workpiece Slenderness on the Numerical Flow Lines Distribution in the Cross-Section of a Circular-Symmetric Part Hot Die Forged with a Hammer
Tomasz Miłek
Adv. Sci. Technol. Res. J. 2022; 16(6):108–117
DOI: https://doi.org/10.12913/22998624/155941
 

Repair of Closed Fermentation Chamber and its Influence on Strength Properties of the Tank – Case Study
Bogdan Szturomski, Radosław Kiciński, Aneta Szturomska, Jacek Krawczyk
Adv. Sci. Technol. Res. J. 2022; 16(6):97–107
DOI: https://doi.org/10.12913/22998624/155817
 

Numerical Buckling Analysis of Thin-Walled Channel-Section Composite Profiles Weakened by Cut-Outs
Katarzyna Falkowicz
Adv. Sci. Technol. Res. J. 2022; 16(6):88–96
DOI: https://doi.org/10.12913/22998624/155397
 

The Influence of Normal Pressure on the Friction Force Reduction Effect Caused by Longitudinal Tangential Vibrations
Mariusz Leus, Marta Rybkiewicz, Marcin Woźniak
Adv. Sci. Technol. Res. J. 2022; 16(6):14–22
DOI: https://doi.org/10.12913/22998624/155055
 

Tooth Contact Analysis of Cylindrical Gears with an Unconventional Tooth Profile
Michał Batsch, Dawid Wydrzyński, Łukasz Przeszłowski
Adv. Sci. Technol. Res. J. 2022; 16(4):119–129
DOI: https://doi.org/10.12913/22998624/152172
 

Numerical Analysis of the Impact of Geometric Parameters of the Outcuts in the Wing Torsion Box Wall on the Mechanical Properties of the Structure
Tomasz Kopecki
Adv. Sci. Technol. Res. J. 2022; 16(3):176–182
DOI: https://doi.org/10.12913/22998624/149909
 
Most read
Indexes
 
Keywords index
Authors index
© 2006-2023 Journal hosting platform by Bentus