Topic Computer Engineering
Investigation of the Dynamic Characteristics and Machining Stability of a Bi-rotary Milling Tool
Adv. Sci. Technol. Res. J. 2019; 13(1)
The Simulation of Conveyor Control System Using the Virtual Commissioning and Virtual Reality
Adv. Sci. Technol. Res. J. 2018; 12(4):164–171
An Effective and Fast Iranian License Plate Detection Using Statistical and Geometrical Approaches
Adv. Sci. Technol. Res. J. 2018; 12(4):115–125
Optimization of Machine Learning Process Using Parallel Computing
Adv. Sci. Technol. Res. J. 2018; 12(4):81–87
Evaluation of the Damage Initiation of a Composite Thin-Walled Structure, on the Example of the ADUSTER Gyroplane Undercarriage
Adv. Sci. Technol. Res. J. 2018; 12(4):48–55
Hybrid Modeling Methods of Cranial Implants
Adv. Sci. Technol. Res. J. 2018; 12(4):35–47
GEOMETRIC OPTIMIZATION OF A BEAM DETECTOR FOR A WIM SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(3):233–241
INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Adv. Sci. Technol. Res. J. 2018; 12(3):242–249
THERMOVISUAL MEASUREMENTS OF 3D PRINTING OF ABS AND PLA FILAMENTS
Adv. Sci. Technol. Res. J. 2018; 12(3):266–271
OUT-OF-PLANE STATIC CRUSHING OF THIN-WALLED HONEYCOMB STRUCTURES. NU-MERICAL AND EXPERIMENTAL INVESTIGATION.
Adv. Sci. Technol. Res. J. 2018; 12(3):96–105
INCREASING EFFICIENCY OF FLEXIBLE MANUFACTURING SYSTEMS BASED ON COMPUTER PRODUCT GROUPING
Adv. Sci. Technol. Res. J. 2018; 12(2):6–10
VISION GUIDED PARALLEL ROBOT AND ITS APPLICATION FOR AUTOMATED ASSEMBLY TASK
Adv. Sci. Technol. Res. J. 2018; 12(2):150–157
IMAGE CLASSIFICATION FOR JPEG COMPRESSION
Adv. Sci. Technol. Res. J. 2018; 12(2):29–34
THE AIR FLOW INFLUENCE ON THE DRAG FORCE OF A SPORTS CAR
Adv. Sci. Technol. Res. J. 2018; 12(2):121–127
USE OF THE FINITE ELEMENT METHOD TO DESIGN THE PROPERTIES OF SHAPED JOINTS MADE OF COMPOSITE MATERIALS
Adv. Sci. Technol. Res. J. 2018; 12(2):59–64
SOLUTION APPROACHES TO DIFFERENTIAL EQUATIONS OF MECHANICAL SYSTEM DYNAMICS: A CASE STUDY OF CAR SUSPENSION SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(2):266–273
APPLICATION OF THE ELASTIC-PLASTIC MODEL IN THE ANALYSIS OF THE DISPLACEMENT IN A ROCK MASS
Adv. Sci. Technol. Res. J. 2018; 12(2):188–196
NUMERICAL ANALYSIS OF THE POSTBUCKLING OF THIN-WALLED COMPOSITE STRUCTURE WITH Z-PROFILE CROSS SECTION
Adv. Sci. Technol. Res. J. 2018; 12(2):52–58
Acoustic Camera as a Fool for Identifying Machinery and Equipment Failures
Adv. Sci. Technol. Res. J. 2018; 12(1):322–328
Investigation of Aerodynamic Interference in a Multirotor by PIV Method
Adv. Sci. Technol. Res. J. 2018; 12(1):106–114
Design and Modelling of a Light Duty Trencher for Local Conditions
Adv. Sci. Technol. Res. J. 2018; 12(1):303–311
Utilisation of Kinect Sensors for the Design of a Human-Robot Collaborative Workcell
Adv. Sci. Technol. Res. J. 2017; 11(4):270–278
The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Adv. Sci. Technol. Res. J. 2017; 11(4):260–269
Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Adv. Sci. Technol. Res. J. 2017; 11(4):83–96
Environment Adaptive Lighting Systems for Smart Homes
Adv. Sci. Technol. Res. J. 2017; 11(3):172–178
Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Adv. Sci. Technol. Res. J. 2017; 11(3):246–252
An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Adv. Sci. Technol. Res. J. 2017; 11(3):223–232
Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
Adv. Sci. Technol. Res. J. 2017; 11(3):211–222
Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies
Adv. Sci. Technol. Res. J. 2017; 11(3):283–288
Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Adv. Sci. Technol. Res. J. 2017; 11(3):150–163
