PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access

Topic Scientific and technical research

 

Response Surface Analysis of the Compressive Strength of Self-Compacting Concrete Incorporating Metakaolin
Ayobami Adebola Busari, Bamidele Dahunsi, Joseph Akinmusuru, Tolulope Loto, Samuel Ajayi
Adv. Sci. Technol. Res. J. 2019; 13(2):7-13
DOI: https://doi.org/10.12913/22998624/105608
 

Experimental Study for Soil Modification Cement Grouting
Majid Ahmadpour
Adv. Sci. Technol. Res. J. 2019; 13(2):141-149
DOI: https://doi.org/10.12913/22998624/103603
 

Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 2. Angular Correction of the Gear Profile
Myron Czerniec
Adv. Sci. Technol. Res. J. 2019; 13(2):1-6
DOI: https://doi.org/10.12913/22998624/99038
 

Designing a Gateway Device for Internet of Things Applications
Deniz Taşkin, Mustafa Çetingöz
Adv. Sci. Technol. Res. J. 2019; 13(1):79-87
DOI: https://doi.org/10.12913/22998624/103383
 

CFD study of the Effect of Piston Crevice Volume on the Temperature Distribution in a Rapid Compression Machine
Oku Ekpenyong Nyong, Celestine Ebieto, Ene Ekpo Bassey, Ikem Azorshubel Ikem
Adv. Sci. Technol. Res. J. 2019; 13(1):46-51
DOI: https://doi.org/10.12913/22998624/103380
 

Dynamic and Stress Analysis of a Locking Mechanism in the Ansys Workbench Software Environment
Alžbeta Sapietová, Pavol Novák, Milan Sága, Peter Šulka, Milan Sapieta
Adv. Sci. Technol. Res. J. 2019; 13(1):23-28
DOI: https://doi.org/10.12913/22998624/101601
 

Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 1. Height Correction of the Gear Profile
Myron Czerniec
Adv. Sci. Technol. Res. J. 2019; 13(1):52-59
DOI: https://doi.org/10.12913/22998624/99037
 

Statistical Analyses of Selected Maintenance Parameters of Vehicles of Road Transport Companies
Jacek Caban, Paweł Droździel, Leszek Krzywonos, Iwona Katarzyna Rybicka, Branislav Šarkan, Ján Vrábel
Adv. Sci. Technol. Res. J. 2019; 13(1):1-13
DOI: https://doi.org/10.12913/22998624/92106
 

Comparative Aspects of Nanoparticles in Relation to Extending Shelf-Life of Molds
Jan Novotný, Irena Lysoňková, Jaromír Cais, Štefan Michna
Adv. Sci. Technol. Res. J. 2019; 13(1):110-115
DOI: https://doi.org/10.12913/22998624/92105
 

Drive System Parameters Influence on Run-Up Process of the Drilling Rig Pumping Unit
Roman Kovalchuk, Yuriy Molkov, Taras Lenkovskiy, Oleksandr Grytsenko, Volodymyr Krasinskyi, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2018; 12(4):199-206
DOI: https://doi.org/10.12913/22998624/100442
 

Conveyor Failure Diagnostics Using Sound Visualization Technique
Marek Moravec, Miroslav Badida, Miroslava Jamborova, Anna Badidova
Adv. Sci. Technol. Res. J. 2018; 12(4):144-150
DOI: https://doi.org/10.12913/22998624/100352
 

Optimization of Production Logistics
Rudolf Kampf, Martina Hlatká, Ladislav Bartuska
Adv. Sci. Technol. Res. J. 2018; 12(4):151-156
DOI: https://doi.org/10.12913/22998624/100351
 

Experience of the Crane Steel Wire Ropes Non-Destructive Tests
Pavel Peterka, Jozef Krešák, Marek Vojtko
Adv. Sci. Technol. Res. J. 2018; 12(4):157-163
DOI: https://doi.org/10.12913/22998624/100350
 

The Simulation of Conveyor Control System Using the Virtual Commissioning and Virtual Reality
Roman Ruzarovsky, Radovan Holubek, Daynier Rolando Delgado Sobrino, Matej Janíček
Adv. Sci. Technol. Res. J. 2018; 12(4):164-171
DOI: https://doi.org/10.12913/22998624/100349
 

Analysis and Classification of Noise Sources of Conveyor Systems by Sound Visualizing on the Postal Package Sorting Line
Pavol Liptai, Ervin Lumnitzer, Marek Moravec, Miriama Piňosová
Adv. Sci. Technol. Res. J. 2018; 12(4):172-176
DOI: https://doi.org/10.12913/22998624/100348
 

Designing and Upgrading the Assembly Process and Verifying the Performance of the Pick to Light System Program
Naqib Daneshjo, Albert Mares, Erika Dudas Pajerska, Zuzana Hajduova
Adv. Sci. Technol. Res. J. 2018; 12(4):126-135
DOI: https://doi.org/10.12913/22998624/100346
 

Properties of Mechatronic System for Hand Rehabilitation
Jacek Stanisław Tutak, Szymon Gurak
Adv. Sci. Technol. Res. J. 2018; 12(4):103-114
DOI: https://doi.org/10.12913/22998624/100344
 

Developing a Bluetooth Low Energy Sensor Node for Greenhouse in Precision Agriculture as Internet of Things Application
Deniz Taşkın, Cem Taşkın, Selçuk Yazar
Adv. Sci. Technol. Res. J. 2018; 12(4):88-96
DOI: https://doi.org/10.12913/22998624/100342
 

Optimization of Machine Learning Process Using Parallel Computing
Michal Kazimierz Grzeszczyk
Adv. Sci. Technol. Res. J. 2018; 12(4):81-87
DOI: https://doi.org/10.12913/22998624/100341
 

Effect of Mesh Electrodes Geometry on the Ozone Concentration in the Presence of Micanite Dielectric
Ernest Gnapowski
Adv. Sci. Technol. Res. J. 2018; 12(4):76-80
DOI: https://doi.org/10.12913/22998624/100340
 

Unconventional Materials from Sewage Sludge with a Potential Application in a Road Construction
Marta Wójcik, Łukasz Bąk, Feliks Stachowicz
Adv. Sci. Technol. Res. J. 2018; 12(4):65-75
DOI: https://doi.org/10.12913/22998624/99991
 

Use of Simulation for Waste Management and Reverse Material Flow
Nikoleta Mikušová, Eva Tomková, Miroslav Dovica, Borna Debelic, Ana Peric-Hadzic, Jozef Zajac
Adv. Sci. Technol. Res. J. 2018; 12(4):136-143
DOI: https://doi.org/10.12913/22998624/94965
 

An Impact of Technological Conditions on Surface Burning in Grinding of the Orbit
Dana Stančeková, Jozef Mrázik, Iwona Katarzyna Rybicka, Nataša Náprstková, Pavel Kraus
Adv. Sci. Technol. Res. J. 2018; 12(4):19-27
DOI: https://doi.org/10.12913/22998624/92104
 

Solutions of the Roller Conveyor in Terms of Logistics Provider
Lucia Madleňáková, Mária Matúšková, Radovan Madleňák, Anna Rudawska, Iwona Rybicka
Adv. Sci. Technol. Res. J. 2018; 12(4):1-9
DOI: https://doi.org/10.12913/22998624/92098
 

ANALYSIS AND ASSESSMENT OF ENERGY EFFICIENCY OF PASSENGER LIFTS
Tomasz Krakowski, Hubert Ruta
Adv. Sci. Technol. Res. J. 2018; 12(3):257-265
DOI: https://doi.org/10.12913/22998624/95165
 

INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2018; 12(3):242-249
DOI: https://doi.org/10.12913/22998624/95056
 

CONCEPT OF UNDERGROUND GAS STORAGE IN THE LIMESTONE ROCKS IN SLOVENIA
Željko Vukelić, Milivoj Vulić
Adv. Sci. Technol. Res. J. 2018; 12(3):197-202
DOI: https://doi.org/10.12913/22998624/94977
 

OBJECTIVE AND SUBJECTIVE EVALUATION OF THE RISK PHYSICAL FACTORS NEAR TO CONVEYOR SYSTEM
Miriama Piňosová, Miriam Andejiová, Pavol Liptai, Ervin Lumnitzer
Adv. Sci. Technol. Res. J. 2018; 12(3):188-196
DOI: https://doi.org/10.12913/22998624/94964
 

CONTROL OF MODULAR CONVEYOR AND AUTOMATED HANDLING DEVICES INTERCONNECTION
Vaclav Cempirek, Vladislav Zitricky, Jozef Gasparik, Peter Blaho
Adv. Sci. Technol. Res. J. 2018; 12(3):210-215
DOI: https://doi.org/10.12913/22998624/94963
 

OPTIMIZATION OF DOSING TANK EMPTYING USING SPIRAL VIBRATION
David Zurovec, Jan Necas, Jan Diviš, Jakub Hlosta, Jiri Zegzulka, Katerina Urbanova
Adv. Sci. Technol. Res. J. 2018; 12(3):143-149
DOI: https://doi.org/10.12913/22998624/94962
 

OPTIMIZATION OF MANIPULATION LOGISTICS USING DATA MATRIX CODES
Elena Pivarciova, Ladislav Karrach, Zuzana Tučková
Adv. Sci. Technol. Res. J. 2018; 12(3):173-180
DOI: https://doi.org/10.12913/22998624/94961
 

USING HYDRODYNAMIC CAVITATION DEVICE IN THE INDUSTRY
Tatiana Vitenko, Paweł Droździel, Anna Rudawska
Adv. Sci. Technol. Res. J. 2018; 12(3):158-167
DOI: https://doi.org/10.12913/22998624/94944
 

POST-CRITICAL DEFORMATION OF THIN-WALLED LOAD-BEARING AIRCRAFT STRUCTURE REPRESENTING FRAGMENT OF THE ONE-WAY TORSION BOX
Tomasz Kopecki, Tomasz Lis, Przemysław Mazurek
Adv. Sci. Technol. Res. J. 2018; 12(3):203-209
DOI: https://doi.org/10.12913/22998624/94923
 

ADAPTIVE OPTIMAL CONTROL OF ELECTRIC POWER SYSTEM OPERATION MODE ON THE BASE OF LEAST ACTION PRINCIPLE
Michalina Gryniewicz-Jaworska, Petro D. Lezhniuk, Volodymyr V. Kulyk, Volodymyr V. Netrebskiy, Yevhenii V. Duchkov
Adv. Sci. Technol. Res. J. 2018; 12(3):61-65
DOI: https://doi.org/10.12913/22998624/94922
 

THERMOVISUAL MEASUREMENTS OF 3D PRINTING OF ABS AND PLA FILAMENTS
Łukasz Zgryza, Anna Raczyńska, Magdalena Paśnikowska-Łukaszuk
Adv. Sci. Technol. Res. J. 2018; 12(3):266-271
DOI: https://doi.org/10.12913/22998624/94325
 

DAILY KILOMETRAGE ANALYSIS FOR SELECTED VEHICLE GROUPS
Dariusz Dobrowolski, Paweł Droździel, Radovan Madleňák, Iwona Katarzyna Rybicka, Dariusz Siłuch
Adv. Sci. Technol. Res. J. 2018; 12(3):39-46
DOI: https://doi.org/10.12913/22998624/92109
 

QUANTIFICATION OF ROAD VEHICLE PERFORMANCE PARAMETERS UNDER LABORATORY CONDITIONS
Branislav Šarkan, Ondrej Stopka
Adv. Sci. Technol. Res. J. 2018; 12(3):16-23
DOI: https://doi.org/10.12913/22998624/92107
 

SELECTION OF AN APPROPRIATE DISTRIBUTION CHANNEL FOR HIGH-VALUE STONE
Nikoleta Mikušová, Eva Tomková, David Hrdlý, Petr Pruša, Rudolf Kampf
Adv. Sci. Technol. Res. J. 2018; 12(2):298-306
DOI: https://doi.org/10.12913/22998624/92354
 

REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
Vieroslav Molnar, Beáta Stehlíková
Adv. Sci. Technol. Res. J. 2018; 12(2):244-251
DOI: https://doi.org/10.12913/22998624/92342
 

THE CAUSES OF THE DAMAGE TO THE BEARING ROPE – THE FAILUREANALYSIS
Pavel Peterka, Jozef Krešák
Adv. Sci. Technol. Res. J. 2018; 12(2):231-236
DOI: https://doi.org/10.12913/22998624/92341
 

RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Yuri Turygin, Pavol Bozek, Ivan Abaramov, Yury Nikitin
Adv. Sci. Technol. Res. J. 2018; 12(2):274-290
DOI: https://doi.org/10.12913/22998624/92298
 

APPLICATION OF SUPPLY CHAIN MANAGEMENT IN CONSTRUCTION INDUSTRY
Nguyen Thanh Phong
Adv. Sci. Technol. Res. J. 2018; 12(2):11-19
DOI: https://doi.org/10.12913/22998624/92112
 

DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Gabriel Fedorko, Hana Neradilová, Juraj Jackanin
Adv. Sci. Technol. Res. J. 2018; 12(2):170-179
DOI: https://doi.org/10.12913/22998624/92108
 

THE ANALYSIS OF THE TRAFFIC SIGNS VISIBILITY DURING NIGHT DRIVING
Radovan Madleňák, Lucia Madleňáková, Dominika Hoštáková, Pawel Drozdziel, Adam Török
Adv. Sci. Technol. Res. J. 2018; 12(2):71-76
DOI: https://doi.org/10.12913/22998624/92103
 

EVALUATION CRITERIA OF THE BELT CONVEYOR USING THE AHP METHOD AND SELECTION THE RIGHT CONVEYOR BY HURWITZ METHOD
Petr Průša, Stefan Jovčic, Svetlana Nikolicic
Adv. Sci. Technol. Res. J. 2018; 12(2):137-143
DOI: https://doi.org/10.12913/22998624/92092
 

ANALYSIS OF POSSIBILITIES TO IMPROVE ENVIRONMENTAL OPERATING PARAMETERS OF MODERN COMPRESSION – IGNITION ENGINES
Tomasz Osipowicz, Karol Franciszek Abramek, Dalibor Barta, Paweł Droździel, Maciej Lisowski
Adv. Sci. Technol. Res. J. 2018; 12(2):206-213
DOI: https://doi.org/10.12913/22998624/91892
 

THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER
Jiří Kratochvíl, Marek Sadílek, Václav Musil, Marek Pagáč, Dana Stančeková
Adv. Sci. Technol. Res. J. 2018; 12(2):197-205
DOI: https://doi.org/10.12913/22998624/91890
 

MEASURING OF MECHANICAL RESISTANCES OF A HEAVY GOOD VEHICLE BY COASTDOWN TEST
Tomáš Skrúcaný, Štefánia Semanová, Martin Kendra, Tomasz Figlus, Ján Vrábel
Adv. Sci. Technol. Res. J. 2018; 12(2):214-221
DOI: https://doi.org/10.12913/22998624/91889
 

MODIFICATIONS AlSi7Mg0.3 ALLOYS TROUGH Ca, Sr AND Sb
Jaromír Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2018; 12(2):180-187
DOI: https://doi.org/10.12913/22998624/91886
 

BUCKLING STABILITY ASSESSMENT OF PLATES UNDER UNIAXIAL COMPRESSION
Farhad Riahi, Tadeh Zirakian, Vahed Mam Ghaderi, Souran Arya
Adv. Sci. Technol. Res. J. 2018; 12(2):97-105
DOI: https://doi.org/10.12913/22998624/90789
 

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES
Gurkan Altan
Adv. Sci. Technol. Res. J. 2018; 12(2):65-70
DOI: https://doi.org/10.12913/22998624/89756
 

EFFECT OF TECHNOLOGICAL PARAMETERS ON THE SURFACE ROUGHNESS OF ALUMINIUM ALLOYS AFTER TURNING
Ireneusz Zagórski, Tomasz Warda
Adv. Sci. Technol. Res. J. 2018; 12(2):144-149
DOI: https://doi.org/10.12913/22998624/87136
 

INFLUENCE OF REDM PARAMETERS ON SURFACE’S SHAPE
Zbigniew Gulbinowicz, Olgierd Janusz Goroch
Adv. Sci. Technol. Res. J. 2018; 12(2):89-96
DOI: https://doi.org/10.12913/22998624/87065
 

IMAGE CLASSIFICATION FOR JPEG COMPRESSION
Jevgenij Tichonov, Olga Kurasova, Ernestas Filatovas
Adv. Sci. Technol. Res. J. 2018; 12(2):29-34
DOI: https://doi.org/10.12913/22998624/87041
 

GEOMETRIC STRUCTURE OF THE C45 STEEL SURFACE AFTER CENTRIFUGAL BURNISHING AND PERPENDICULAR SHOT PEENING
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2018; 12(2):20-28
DOI: https://doi.org/10.12913/22998624/86208
 

EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adam Gnatowski, Marcin Sosnowski, Anna Pajdak, Jacek Sobczyk
Adv. Sci. Technol. Res. J. 2018; 12(2):42-51
DOI: https://doi.org/10.12913/22998624/78517
 

GRADIENT COMPOSITE COATINGS FOR WORKING SURFACES OF BRAKING DEVICES
Mykhaylo Pashechko, Myroslav Kindrachuk, Ihor Humeniuk, Taras Berezhanskyi
Adv. Sci. Technol. Res. J. 2018; 12(2):1-5
DOI: https://doi.org/10.12913/22998624/70759
 

Studying the Effect of Finishing Work on the Geometric Accuracy of the Laser Cut Elements
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2018; 12(1):267-272
DOI: https://doi.org/10.12913/22998624/87042
 

Advanced Time-Frequency Representation in Voice Signal Analysis
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2018; 12(1):251-259
DOI: https://doi.org/10.12913/22998624/87028
 

Device Designed for Detection and Setting the Required Tensile Force in Ropes
Leopold Hrabovský, Marinko Maslarić
Adv. Sci. Technol. Res. J. 2018; 12(1):200-206
DOI: https://doi.org/10.12913/22998624/86614
 

The Design of Method Intended for Implementation of Collaborative Assembly Tasks
Vladimir Tlach, Ivan Kuric, Ivan Zajačko, Darina Kumičáková, Alexander Rengevič
Adv. Sci. Technol. Res. J. 2018; 12(1):244-250
DOI: https://doi.org/10.12913/22998624/86476
 

Influence and Optimization of the Setting of Input Parameters of Laser Profilometry by the Surface Measurement Manufactured by the AWJ Technology
Gerhard Mital, Ivan Gajdoš, Juraj Ruzbarsky, Tomasz Jachowicz, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2018; 12(1):329-337
DOI: https://doi.org/10.12913/22998624/86474
 

Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Tomáš Zlámal, Jiří Hajnyš, Jana Petrů, Ivan Mrkvica
Adv. Sci. Technol. Res. J. 2018; 12(1):236-243
DOI: https://doi.org/10.12913/22998624/86262
 

Comparison of Conventional and Hybrid Cars Exploitation Costs
Saugirdas Pukalskas, Alfredas Rimkus, Mindaugas Melaika, Robertas Peceliunas
Adv. Sci. Technol. Res. J. 2018; 12(1):221-227
DOI: https://doi.org/10.12913/22998624/86259
 

Possibility of Increasing Vehicle Energy Balance Using Coasting
Martin Mruzek, Dalibor Barta, Robert Labuda, Tomas Skrucany, Leszek Gardyński
Adv. Sci. Technol. Res. J. 2018; 12(1):228-235
DOI: https://doi.org/10.12913/22998624/86215
 

Application of MCDA in Selection of Different Mining Methods and Solutions
Dejan Stevanović, Milena Lekić, Daniel Krzanovic, Ivica Ristović
Adv. Sci. Technol. Res. J. 2018; 12(1):171-180
DOI: https://doi.org/10.12913/22998624/85804
 

Buckling Deformation of Thin Layer Coverings of Small Curvatures Used in Aircraft Construction.
Tomasz Kopecki, Przemysław Mazurek, Tomasz Lis, Jerzy Bakunowicz
Adv. Sci. Technol. Res. J. 2018; 12(1):293-302
DOI: https://doi.org/10.12913/22998624/85660
 

Hob Identification Methods
Andrzej Piotrowski
Adv. Sci. Technol. Res. J. 2018; 12(1):150-161
DOI: https://doi.org/10.12913/22998624/81801
 

State of Residual Stresses After the Process of Milling Selected Aluminium Alloys
Józef Kuczmaszewski, Waldemar Łogin, Paweł Pieśko, Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2018; 12(1):63-73
DOI: https://doi.org/10.12913/22998624/81768
 

Numerical Modelling of Behaviour of Surface Finishing of Composite Materials
Josef Vosáhlo, Martina Syrovatkova, Michal Petru
Adv. Sci. Technol. Res. J. 2018; 12(1):48-53
DOI: https://doi.org/10.12913/22998624/81449
 

Optimal Control of Wind Power Generation
Pawel Pijarski, Michal Wydra, Piotr Kacejko
Adv. Sci. Technol. Res. J. 2018; 12(1):9-18
DOI: https://doi.org/10.12913/22998624/81448
 

Acceptance and Reverification of CMM in Industrial Conditions
Robert Grzegorz Koteras, Michał Wieczorowski, Piotr Znaniecki
Adv. Sci. Technol. Res. J. 2018; 12(1):80-88
DOI: https://doi.org/10.12913/22998624/80987
 

The Effects of Vehicle Load on Driving Characteristics
Vladimir Rievaj, Ján Vrábel, František Synák, Ladislav Bartuška
Adv. Sci. Technol. Res. J. 2018; 12(1):142-149
DOI: https://doi.org/10.12913/22998624/80896
 

Influence of Sterilization of a Product Manufactured Using FDM Technology on its Dimensional Accuracy
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Jacek Banaszewski
Adv. Sci. Technol. Res. J. 2018; 12(1):74-79
DOI: https://doi.org/10.12913/22998624/80849
 

Numerical Simulation of Forming Titanium Thin-wall Panels with Stiffeners
Janina Adamus, Julita Winowiecka, Marcin Dyner, Piotr Lacki
Adv. Sci. Technol. Res. J. 2018; 12(1):54-62
DOI: https://doi.org/10.12913/22998624/80826
 

The Effect of Active Diluent Addition on the Energy and Adhesive Properties of Epoxy Adhesive
Anna Krawczuk, Jacek Domińczuk
Adv. Sci. Technol. Res. J. 2018; 12(1):19-25
DOI: https://doi.org/10.12913/22998624/74655
 

Functional Plasma-Deposited Coatings
Mykhaylo Pashechko, Myroslav Kindrachuk, Igor Gumeniuk, Oleksandr Tisov, Volodymyr Zahrebelniy
Adv. Sci. Technol. Res. J. 2017; 11(4):301-304
DOI: https://doi.org/10.12913/22998624/80996
 

A Tension Equalizer in Lift Carrying Ropes
Leopold Hrabovský, Peter Michalik
Adv. Sci. Technol. Res. J. 2017; 11(4):326-332
DOI: https://doi.org/10.12913/22998624/80936
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
DOI: https://doi.org/10.12913/22998624/80901
 

Research on Inner Surface of Tubes Hydroformed
Vasile Adrian Ceclan, Sorin Dumitru Grozav, Ivan Kuric
Adv. Sci. Technol. Res. J. 2017; 11(4):311-317
DOI: https://doi.org/10.12913/22998624/80900
 

Measurement of Hydrogen Storage Capacity in Ca72Mg28 Alloy
Tomáš Brestovič, Natália Jasminská, Marián Lázár, Karel Saksl, Ľubica Bednárová, Michaela Šulíková, Mária Čarnogurská
Adv. Sci. Technol. Res. J. 2017; 11(4):103-110
DOI: https://doi.org/10.12913/22998624/80871
 

The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Stanisław Bławucki, Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2017; 11(4):260-269
DOI: https://doi.org/10.12913/22998624/80841
 

Identification of Noise Generated by Driving Set of Autogyro Using an Acoustic Camera
Paweł Magryta, Zbigniew Czyż, Krzysztof Skiba
Adv. Sci. Technol. Res. J. 2017; 11(4):247-251
DOI: https://doi.org/10.12913/22998624/80825
 

Possibilities of More Efficient Use of Simulation Tools in Enterprise Logistics
Matúš Hegedüš, Gabriel Fedorko, Matúš Beluško, Martina Hlatká, Pavel Fábera, Hana Neradilová
Adv. Sci. Technol. Res. J. 2017; 11(4):189-197
DOI: https://doi.org/10.12913/22998624/80319
 

Wear Analysis of Die Inserts in the Hot Forging Process of a Forked Type Forging Using Reverse Scanning Techniques
Łukasz Dworzak, Marek Robert Hawryluk, Jacek Piotr Ziemba
Adv. Sci. Technol. Res. J. 2017; 11(4):225-238
DOI: https://doi.org/10.12913/22998624/80318
 

Design and Effectiveness Verification of Sound Reduction Measures in Production Hall
Marek Moravec, Pavol Liptai, Tibor Dzuro, Miroslav Badida
Adv. Sci. Technol. Res. J. 2017; 11(4):220-224
DOI: https://doi.org/10.12913/22998624/80310
 

Fretting Wear Analysis of Different Tube Materials Used in Heat Exchanger Tube Bundle
Tasawar Abbas, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman
Adv. Sci. Technol. Res. J. 2017; 11(4):123-133
DOI: https://doi.org/10.12913/22998624/80309
 

Effect of Incidence Angle Varying from 0 rad to π/2 rad and Intensity of Radio Waves on the Performance of a Silicon Solar Cell
Issa Zerbo, Mamoudou Saria, Martial Zoungrana, Adama Ouedraogo, Dieudonné Joseph Bathiebo
Adv. Sci. Technol. Res. J. 2017; 11(4):68-75
DOI: https://doi.org/10.12913/22998624/80090
 

The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Michał Jakubowicz, Janusz Dereżyński
Adv. Sci. Technol. Res. J. 2017; 11(4):198-205
DOI: https://doi.org/10.12913/22998624/79830
 

Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Tomáš Stejskal, Miroslav Dovica, Peter Demeč, Jozef Svetlik, Viktoria Rajtukova
Adv. Sci. Technol. Res. J. 2017; 11(4):159-167
DOI: https://doi.org/10.12913/22998624/78669
 

Energy Intensity of the Electric Vehicle
Mieczysław Dziubiński, Artur Drozd, Marek Adamiec, Ewa Siemionek
Adv. Sci. Technol. Res. J. 2017; 11(4):27-34
DOI: https://doi.org/10.12913/22998624/78516
 

Electrochemical Grinding of Titanium-Containing Materials
Krzysztof Przystupa, Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(4):183-188
DOI: https://doi.org/10.12913/22998624/78167
 

Peg-on-Hole: Fundamental Principles of Motion of a Peg Leaning on a Horizontal Hole Edge
Dmitry Simakov, Ludmila Chernyakhovskaya
Adv. Sci. Technol. Res. J. 2017; 11(4):49-59
DOI: https://doi.org/10.12913/22998624/77036
 

Information Support of Optimal Control of Modes of Electric Systems with Renewable Energy Sources
Michalina Gryniewicz-Jaworska, Volodymyr V. Kulyk, Iryna A. Bartetska, Olga A. Buslavets
Adv. Sci. Technol. Res. J. 2017; 11(4):21-26
DOI: https://doi.org/10.12913/22998624/75888
 

The Effect of Selected Conditions in a Thermoforming Process on Wall Thickness Variations
Emil Sasimowski
Adv. Sci. Technol. Res. J. 2017; 11(4):41-48
DOI: https://doi.org/10.12913/22998624/73818
 

Impact of the Technological Conditions of Plane Surface Machining on a Triangular Milling Cutter on the Residual Hysteresis of the Movement Axis of the Machine
Jan Kral, Tomáš Stejskal, Jaroslav Melko, Ľudmila Pavlikova, Adrián Rjabušin, Vladimír Rudy
Adv. Sci. Technol. Res. J. 2017; 11(3):240-245
DOI: https://doi.org/10.12913/22998624/76710
 

Wave Propagation Characteristics in Functionally Graded Double-Beams
Fatih Karacam, Metin Aydogdu
Adv. Sci. Technol. Res. J. 2017; 11(3):143-149
DOI: https://doi.org/10.12913/22998624/76697
 

Rheological Properties of Compositions Based on Modified Polyvinyl Alcohol
Volodymyr Krasinskyi, Oleh Suberlyak, Viktoria Antonuk, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2017; 11(3):304-309
DOI: https://doi.org/10.12913/22998624/76584
 

Structure and Construction Assessment of the Surface Layer of Hardfaced Coating after Friction
Krzysztof Dziedzic, Mykhaylo Pashechko, Marcin Barszcz, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2017; 11(3):253-260
DOI: https://doi.org/10.12913/22998624/76583
 

Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints
Kamil Anasiewicz, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2017; 11(3):270-276
DOI: https://doi.org/10.12913/22998624/76480
 

Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Andrzej Maruszczyk, Agata Dudek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2017; 11(3):204-210
DOI: https://doi.org/10.12913/22998624/76450
 

Environment Adaptive Lighting Systems for Smart Homes
Cem Mehmet Catalbas
Adv. Sci. Technol. Res. J. 2017; 11(3):172-178
DOI: https://doi.org/10.12913/22998624/76449
 

An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Jan Buša, Jan Buša Jr,, Miroslav Dovica, Michal Fabián, Peter Izol, Stanislav Honus
Adv. Sci. Technol. Res. J. 2017; 11(3):223-232
DOI: https://doi.org/10.12913/22998624/76094
 

Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
Štefan Václav, Nikolay Sergeevich Sivtsev, Katarína Senderská
Adv. Sci. Technol. Res. J. 2017; 11(3):211-222
DOI: https://doi.org/10.12913/22998624/76093
 

Proposal of the Sound Insulating Measures for Vibrational Sorter and Verification of the Effectiveness Measures
Pavol Liptai, Marek Moravec, Ervin Lumnitzer, Marcela Gergeľová
Adv. Sci. Technol. Res. J. 2017; 11(3):196-203
DOI: https://doi.org/10.12913/22998624/76068
 

Variable Valve Timing Scheduling in a 4-Stroke Internal Combustion Cylinder Utilizing Artificial Neural Networks
Sepehr Bapiri, Omid Chaghaneh, Hossein Ghomashi
Adv. Sci. Technol. Res. J. 2017; 11(3):114-121
DOI: https://doi.org/10.12913/22998624/75968
 

Modeling of Thermal Cycle CI Engine with Multi-Stage Fuel Injection
Arkadiusz Jamrozik, Wojciech Tutak, Adam Gnatowski, Renata Gnatowska, Jerzy Winczek, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2017; 11(3):179-186
DOI: https://doi.org/10.12913/22998624/75967
 

Analysis and Assessment of Dynamic Response to Passengers During Lift Emergency Braking
Tomasz Magiera, Paweł Kułaga, Kaja Wójcik
Adv. Sci. Technol. Res. J. 2017; 11(3):164-171
DOI: https://doi.org/10.12913/22998624/74181
 

EDM of Aluminum Alloy 6061 Using Graphite Electrode Using Paraffin Oil and Distilled Water as Dielectric Medium
Muhammad Imran, Masood Shah, Shahid Mehmood, Rubab Arshad
Adv. Sci. Technol. Res. J. 2017; 11(3):72-79
DOI: https://doi.org/10.12913/22998624/73821
 

Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates
Muhammad Farhan Noor, Riffat Asim Pasha, Aneela Wakeel, Muhammad Ali Nasir, Yasir Bilal
Adv. Sci. Technol. Res. J. 2017; 11(3):80-86
DOI: https://doi.org/10.12913/22998624/73820
 

FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy
Patryk Różyło, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2017; 11(3):94-101
DOI: https://doi.org/10.12913/22998624/70691
 

THE EFFECT OF THE CONDITIONS OF SHOT PEENING THE INCONEL 718 NICKEL ALLOY ON THE GEOMETRICAL STRUCTURE OF THE SURFACE
Kazimierz Zaleski, Agnieszka Skoczylas, Małgorzata Brzozowska
Adv. Sci. Technol. Res. J. 2017; 11(2):205-211
DOI: https://doi.org/10.12913/22998624/74180
 

DESIGN OF A CALCULATION FEM MODEL OF THE TEST STATIC STAND OF PIPE CONVEYOR FOR ANALYSIS OF CONTACT FORCES
Gabriel Fedorko, Vieroslav Molnar
Adv. Sci. Technol. Res. J. 2017; 11(2):220-225
DOI: https://doi.org/10.12913/22998624/71268
 

NECESSITY OF WIRE ROPE REPLACEMENT IN CRANE LIFTING EQUIPMENT AFTER CHANGE OF CRANE OPERATIONAL PARAMETERS
Jozef Kuľka, Martin Mantič, Melichar Kopas, Eva Faltinová
Adv. Sci. Technol. Res. J. 2017; 11(2):226-230
DOI: https://doi.org/10.12913/22998624/71180
 

SIMULATION OF HELICAL GEAR FORMING OF AZ31 MAGNESIUM MATERIAL
Önder Ayer
Adv. Sci. Technol. Res. J. 2017; 11(2):187-191
DOI: https://doi.org/10.12913/22998624/70998
 

A PRESSURE-BUBBLE VACUUM FORMING PROCESS FOR POLYSTYRENE SHEET
Emil Sasimowski
Adv. Sci. Technol. Res. J. 2017; 11(2):180-186
DOI: https://doi.org/10.12913/22998624/70801
 

INTEGRAL INDEX OF OPERATION QUALITY FOR EVALUATION OF IMPACT OF DISTRIBUTIVE GENERATION SOURCES ON ELECTRIC NETWORK MODES
Petro D. Lezhniuk, Vyacheslav O. Komar, Dmytro S. Sobchuk, Vira V. Teptia, Michalina Gryniewicz-Jaworska
Adv. Sci. Technol. Res. J. 2017; 11(2):65-71
DOI: https://doi.org/10.12913/22998624/70760
 

NUMERICAL THERMAL ANALYSIS OF A CAR BRAKING SYSTEM
Patryk Różyło
Adv. Sci. Technol. Res. J. 2017; 11(2):38-43
DOI: https://doi.org/10.12913/22998624/70693
 

MODELLING CHARACTERISTICS OF SPARK IGNITION ENGINE INJECTION SYSTEM
Mieczysław Dziubiński, Grzegorz Litak, Artur Drozd, Piotr Żukowicz
Adv. Sci. Technol. Res. J. 2017; 11(2):103-117
DOI: https://doi.org/10.12913/22998624/70565
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159-165
DOI: https://doi.org/10.12913/22998624/69680
 

ANALYSIS OF THERMAL PROPERTIES AND HEAT LOSS IN CONSTRUCTION AND ISOTHERMAL MATERIALS OF MULTILAYER BUILDING WALLS
Arkadiusz Urzędowski, Joanna Styczeń, Dorota Wójcicka-Migasiuk
Adv. Sci. Technol. Res. J. 2017; 11(2):33-37
DOI: https://doi.org/10.12913/22998624/69418
 

DEDICATED EXHAUST GAS RECIRCULATION IN SPARK IGNITION ENGINES
Sooraj Rehan
Adv. Sci. Technol. Res. J. 2017; 11(2):44-50
DOI: https://doi.org/10.12913/22998624/69339
 

DETECTION OF DRIVER SLEEPINESS AND WARNING THE DRIVER IN REAL-TIME USING IMAGE PROCESSING AND MACHINE LEARNING TECHNIQUES
İlhan Umut, Ozan Aki, Erdem Uçar, Levent Öztürk
Adv. Sci. Technol. Res. J. 2017; 11(2):95-102
DOI: https://doi.org/10.12913/22998624/69149
 

DETERMINING THE VALUE OF SURFACE FREE ENERGY ON THE BASIS OF THE CONTACT ANGLE
Mariusz Kłonica, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2017; 11(1):66-74
DOI: https://doi.org/10.12913/22998624/68800
 

HORIZONTAL AUTOMATED STORAGE AND RETRIEVAL SYSTEM
Jacek Stanisław Tutak, Jakub Wiech
Adv. Sci. Technol. Res. J. 2017; 11(1):82-95
DOI: https://doi.org/10.12913/22998624/68470
 

BUCKLING BEHAVIOUR OF SINGLE-WALLED CARBON NANOTUBES UNDER AXIAL LOADING
Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(1):208-211
DOI: https://doi.org/10.12913/22998624/68468
 

MONITORING OF CUTTING CONDITIONS WITH THE EMPIRICAL MODE DECOMPOSITION
Piotr Krzysztof Wolszczak, Grzegorz Litak, Krystian Łygas
Adv. Sci. Technol. Res. J. 2017; 11(1):96-103
DOI: https://doi.org/10.12913/22998624/68467
 

EXPERIMENTAL INVESTIGATION TO STUDY THE VISCOSITY AND DISPERSION OF CONDUCTIVE AND NON-CONDUCTIVE NANOPOWDERS’ BLENDED DIELECTRICS
K. Santarao, C.L.V.R.S.V. Prasad, G. Swami Naidu
Adv. Sci. Technol. Res. J. 2017; 11(1):154-160
DOI: https://doi.org/10.12913/22998624/68463
 

CNG INJECTOR RESEARCH FOR DUAL FUEL ENGINE
Adam Majczak, Grzegorz Barański, Rafał Sochaczewski, Ksenia Siadkowska
Adv. Sci. Technol. Res. J. 2017; 11(1):212-219
DOI: https://doi.org/10.12913/22998624/68458
 

POSTBUCKLING BEHAVIOUR OF LAMINATED PLATES WITH A CUT-OUT
Katarzyna Falkowicz, Hubert Dębski
Adv. Sci. Technol. Res. J. 2017; 11(1):186-193
DOI: https://doi.org/10.12913/22998624/68283
 

INFLUENCE OF SELECTED CUTTING CONDITIONS ON CUTTING FORCES
Augustín Görög, Dana Stančeková, Mária Kapustová, Ingrid Görögová, Izabela Miturska
Adv. Sci. Technol. Res. J. 2017; 11(1):179-185
DOI: https://doi.org/10.12913/22998624/66508
 

REDUCING ENERGY CONSUMPTION BY PASSENGER CAR WITH USING OF NON-ELECTRICAL HYBRID DRIVE TECHNOLOGY
Tomas Skrucany, Veronika Harantova, Martin Kendra, Dalibor Barta
Adv. Sci. Technol. Res. J. 2017; 11(1):166-172
DOI: https://doi.org/10.12913/22998624/66505
 

THE ENGINE SET DAMAGE ASSESSMENT IN THE PUBLIC TRANSPORT VEHICLES
Paweł Droździel, Iwona Rybicka, Radovan Madleňák, Aleksandra Andrusiuk, Dariusz Siłuch
Adv. Sci. Technol. Res. J. 2017; 11(1):117-127
DOI: https://doi.org/10.12913/22998624/66502
 

ROP MATHEMATICAL MODEL OF ROTARY-ULTRASONIC CORE DRILLING OF BRITTLE MATERIAL
Mera Fayez Horne
Adv. Sci. Technol. Res. J. 2017; 11(1):1-28
DOI: https://doi.org/10.12913/22998624/68903
 

THE CHARACTERISTICS OF THE OPERATING PARAMETERS OF THE VERTICAL AXIS WIND TURBINE FOR THE SELECTED WIND SPEED
Zbigniew Czyż, Zdzisław Kamiński
Adv. Sci. Technol. Res. J. 2017; 11(1):58-65
DOI: https://doi.org/10.12913/22998624/68469
 

COMPARATIVE ANALYSIS OF EFFECT OF THERMAL SHOCK ON ADHESIVE JOINT STRENGTH
Mariusz Kłonica
Adv. Sci. Technol. Res. J. 2016; 10(32):263-268
DOI: https://doi.org/10.12913/22998624/66509
 

MONITORING OF CONCRETE CURING IN EXTRADOSED BRIDGE SUPPORTED BY NUMERICAL SIMULATION
Aleksandra Mariak, Jacek Chróścielewski, Agnieszka Sabik, Błażej Meronk, Krzysztof Wilde
Adv. Sci. Technol. Res. J. 2016; 10(32):254-262
DOI: https://doi.org/10.12913/22998624/66186
 

THE EFFECT OF BLOWING AGENTS ON THE EFFECTIVENESS OF POLY(VINYL CHLORIDE) EXTRUSION
Tomasz Garbacz, Tomasz Jachowicz, Aneta Tor-Świątek
Adv. Sci. Technol. Res. J. 2016; 10(32):217-223
DOI: https://doi.org/10.12913/22998624/65673
 

THE EFFECT OF MULTIPLE PROCESSING OF POLYPROPYLENE ON SELECTED PROPERTIES OF INJECTION MOULDED PARTS
Karolina Głogowska, Janusz Wojciech Sikora, Ludmila Dulebová
Adv. Sci. Technol. Res. J. 2016; 10(32):65-72
DOI: https://doi.org/10.12913/22998624/65139
 

SPECTRAL METHODS IN POLISH EMOTIONAL SPEECH RECOGNITION
Paweł Powroźnik, Dariusz Czerwiński
Adv. Sci. Technol. Res. J. 2016; 10(32):73-81
DOI: https://doi.org/10.12913/22998624/65138
 

INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511
Jerzy Józwik, Dawid Ostrowski, Paweł Jarosz, Dariusz Mika
Adv. Sci. Technol. Res. J. 2016; 10(32):86-96
DOI: https://doi.org/10.12913/22998624/65136
 

RELIABILITY EVALUATION OF RENEWABLE ENERGY-BASED POWER SYSTEM CONTAINING ENERGY STORAGE
Amir Ghaedi, Erfaneh Noroozi
Adv. Sci. Technol. Res. J. 2016; 10(32):198-205
DOI: https://doi.org/10.12913/22998624/65132
 

STUDY OF CHIP IGNITION AND CHIP MORPHOLOGY AFTER MILLING OF MAGNESIUM ALLOYS
Ireneusz Zagórski, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2016; 10(32):101-108
DOI: https://doi.org/10.12913/22998624/65130
 

THEORETICAL AND EXPERIMENTAL ANALYSIS OF ROTARY COMPRESSION OF BALL PINS HOLLOW FORGINGS
Janusz Tomczak, Tomasz Bulzak, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2016; 10(32):109-117
DOI: https://doi.org/10.12913/22998624/65129
 

STUDIES ON THE SELECTED PROPERTIES OF C45 STEEL ELEMENTS SURFACE LAYER AFTER LASER CUTTING, FINISHING MILLING AND BURNISHING
Agnieszka Skoczylas, Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2016; 10(32):118-123
DOI: https://doi.org/10.12913/22998624/65127
 

VISCOUS AND MAGNETIC FORCE ACTING IN A HIGH SPEED SOLENOID VALVE
Robert Goraj
Adv. Sci. Technol. Res. J. 2016; 10(32):132-143
DOI: https://doi.org/10.12913/22998624/65124
 

FACTORS AFFECTING THE MECHANICAL PROPERTIES OF COMPACT BONE AND MINIATURE SPECIMEN TEST TECHNIQUES: A REVIEW
Vandana Chittibabu, Korada Santa Rao, Potnuru Govinda Rao
Adv. Sci. Technol. Res. J. 2016; 10(32):169-183
DOI: https://doi.org/10.12913/22998624/65117
 

PERFORMANCE EVALUATION OF LIQUID-COOLED PHOTOVOLTAIC SYSTEM USING NUMERICAL METHOD
Yasaman Khanjari, Alibakhsh Kasaeian, Fatolah Pourfayaz, Reza Alayi
Adv. Sci. Technol. Res. J. 2016; 10(32):184-192
DOI: https://doi.org/10.12913/22998624/65115
 

APPLICATION OF CHEMICAL PRE-TREATMENT ON THE POLISHED SURFACE OF ALUMINIUM ALLOYS
Pavel Kraus, Jaroslava Svobodova, Jaromir Cais, Radek Lattner
Adv. Sci. Technol. Res. J. 2016; 10(32):17-23
DOI: https://doi.org/10.12913/22998624/65112
 

RELIABILITY EVALUATION AS A MEANS OF INCREASING THE EFFICIENCY OF EQUIPMENT MAINTENANCE
Vladimír Stuchlý, Roman Poprocký, Malgorzata Kaczmarek
Adv. Sci. Technol. Res. J. 2016; 10(32):40-46
DOI: https://doi.org/10.12913/22998624/65109
 

THE ISSUE OF DETERMINING THE GEOMETRIC POSITION DEVIATION OF THE THREADED HOLES
Pavol Martikáň, Mário Drbúl, Jozef Holubják, Jozef Mrázik, Richard Joch
Adv. Sci. Technol. Res. J. 2016; 10(32):47-52
DOI: https://doi.org/10.12913/22998624/65107
 

INFLUENCE OF THE THICKNESS OF Ni-P COATING APPLIED ON 7075 ALUMINUM ALLOY ON ITS HARDNESS
Kazimierz Czapczyk, Piotr Siwak, Piotr Jabłoński, Łukasz Furmański, Paweł Grobelny, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2016; 10(32):53-58
DOI: https://doi.org/10.12913/22998624/65106
 

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
Tomáš Zlámal, Jana Petrů, Ondřej Vortel, Marek Pagáč, Pavel Krajkovič
Adv. Sci. Technol. Res. J. 2016; 10(31):144-150
DOI: https://doi.org/10.12913/22998624/64074
 

ANALYSIS OF DECREASE MACHINABILITY POSSIBLE CAUSES FOR CLAIMED ALLOY
Nataša Náprstková, Sylvia Kśmierczak
Adv. Sci. Technol. Res. J. 2016; 10(31):94-101
DOI: https://doi.org/10.12913/22998624/64073
 

SURFACE INTEGRITY EVALUATION OF TURNING WITH AUTO-ROTATING TOOL
Jozef Struharnansky, Marek Kordik, Anton Martikan, Dana Stancekova, Jozef Pilc, Karol Vasilko
Adv. Sci. Technol. Res. J. 2016; 10(31):139-143
DOI: https://doi.org/10.12913/22998624/64070
 

SYNTHESIS OF A PUMPING UNIT WITH CONSIDERATION OF A FLEXIBLE MEMBER IN THE SYSTEM
Alžbeta Sapietová, Michal Sekerka, Milan Vaško, Milan Sapieta
Adv. Sci. Technol. Res. J. 2016; 10(31):119-123
DOI: https://doi.org/10.12913/22998624/64069
 

SIMULATION OF COMPONENTS MIXING IN ORDER TO DETERMINE WORKING BODIES RATIONAL PARAMETERS
Igor Stadnyk, Tatiana Vitenko, Paweł Droździel, Andrij Derkach
Adv. Sci. Technol. Res. J. 2016; 10(31):130-138
DOI: https://doi.org/10.12913/22998624/64068
 

PROPOSAL OF DEVICE FOR MONITORING OF EDUCATIONAL MACHINE TOOLS
Miroslav Císar, Ivan Kuric, Nadežda Čuboňová, Štefan Vlček
Adv. Sci. Technol. Res. J. 2016; 10(31):80-86
DOI: https://doi.org/10.12913/22998624/64067
 

THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Anna Rudawska, Dana Stančeková, Józef Brzęczek
Adv. Sci. Technol. Res. J. 2016; 10(31):109-118
DOI: https://doi.org/10.12913/22998624/64066
 

ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES
Miroslav Müller, Petr Valášek
Adv. Sci. Technol. Res. J. 2016; 10(31):87-93
DOI: https://doi.org/10.12913/22998624/64065
 

EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE COMPRESSION OF A THIN-WALLED COMPOSITE PLATE
Katarzyna Falkowicz,