PL EN
THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER
 
More details
Hide details
1
VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic
 
2
University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovak Republic
 
 
Publication date: 2018-06-01
 
 
Corresponding author
Jiří Kratochvíl   

VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic
 
 
Adv. Sci. Technol. Res. J. 2018; 12(2):197-205
 
KEYWORDS
TOPICS
ABSTRACT
The article tackles the possibilities and effectiveness of different printing strategies on Easy 3D MAKER printer. This printer is printing with Fused Deposition Modeling (FDM) method. The operating software of the 3D printer offers various settings, which influence the quality and effecticity of printing. In the article there is described the printing of a sample with all fillament print strategies available in the 3D maker software. The fillament print strategy of the printed model fundamentally influences the consumption of printing material and time at printing the component. The consumption of printing material was assessed indirectly by weight of particular printed samples. For each printing strategy there were 5 samples printed out. The Octagramspiral strategy resulted as the best in material consumption aspect. The most effective strategy in printing time perspective is the Concentric strategy.
Journals System - logo
Scroll to top