PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access

All issues
Volume 12, Issue 1, 2018
 
 

Finite Elements Strenght Analysis of a Compressor Consisting of Four Helical Rotors
Aleksander Nieoczym, Karol Szklarek
Adv. Sci. Technol. Res. J. 2018; 12(1):1-8
DOI: https://doi.org/10.12913/22998624/73822
 

Optimal Control of Wind Power Generation
Pawel Pijarski, Michal Wydra, Piotr Kacejko
Adv. Sci. Technol. Res. J. 2018; 12(1):9-18
DOI: https://doi.org/10.12913/22998624/81448
 

The Effect of Active Diluent Addition on the Energy and Adhesive Properties of Epoxy Adhesive
Anna Krawczuk, Jacek Domińczuk
Adv. Sci. Technol. Res. J. 2018; 12(1):19-25
DOI: https://doi.org/10.12913/22998624/74655
 

Diagnostics of the Passenger Lift Winch
Kamil Szydło, Rafał Longwic
Adv. Sci. Technol. Res. J. 2018; 12(1):26-35
DOI: https://doi.org/10.12913/22998624/76448
 

Effect of PVP and Polybond Compatibilizers on Dynamic Properties of Polymer Blends Analyzed with DMTA
Adam Gnatowski, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2018; 12(1):36-40
DOI: https://doi.org/10.12913/22998624/85628
 

The Effect of Plunge Depth on the Strength Properties of Friction Welded Joints Using the RFSSW Method
Rafał Kluz, Andrzej Kubit, Dawid Wydrzyński
Adv. Sci. Technol. Res. J. 2018; 12(1):41-47
DOI: https://doi.org/10.12913/22998624/76547
 

Numerical Modelling of Behaviour of Surface Finishing of Composite Materials
Josef Vosáhlo, Martina Syrovatkova, Michal Petru
Adv. Sci. Technol. Res. J. 2018; 12(1):48-53
DOI: https://doi.org/10.12913/22998624/81449
 

Numerical Simulation of Forming Titanium Thin-wall Panels with Stiffeners
Janina Adamus, Julita Winowiecka, Marcin Dyner, Piotr Lacki
Adv. Sci. Technol. Res. J. 2018; 12(1):54-62
DOI: https://doi.org/10.12913/22998624/80826
 

State of Residual Stresses After the Process of Milling Selected Aluminium Alloys
Józef Kuczmaszewski, Waldemar Łogin, Paweł Pieśko, Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2018; 12(1):63-73
DOI: https://doi.org/10.12913/22998624/81768
 

Influence of Sterilization of a Product Manufactured Using FDM Technology on its Dimensional Accuracy
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Jacek Banaszewski
Adv. Sci. Technol. Res. J. 2018; 12(1):74-79
DOI: https://doi.org/10.12913/22998624/80849
 

Acceptance and Reverification of CMM in Industrial Conditions
Robert Grzegorz Koteras, Michał Wieczorowski, Piotr Znaniecki
Adv. Sci. Technol. Res. J. 2018; 12(1):80-88
DOI: https://doi.org/10.12913/22998624/80987
 

Analysis of the Effect of Wire Electric Dischage Machining Process Parameters for the Formation of High Speed Steel Form Tool
Kashif Ishfaq, Nadeem Ahmad Mufti, Jawad Ahmad, Muhammad Sajid, Mirza Jahanzaib
Adv. Sci. Technol. Res. J. 2018; 12(1):89-98
DOI: https://doi.org/10.12913/22998624/81001
 

A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication and Minimum Quantity Lubrication
Muhammad Ahsan Ul Haq, Aqib Mashood Khan, Le Gong, Tao Xu, Longhui Meng, Salman Hussain
Adv. Sci. Technol. Res. J. 2018; 12(1):99-105
DOI: https://doi.org/10.12913/22998624/85629
 

Investigation of Aerodynamic Interference in a Multirotor by PIV Method
Zbigniew Czyż, Wit Stryczniewicz
Adv. Sci. Technol. Res. J. 2018; 12(1):106-114
DOI: https://doi.org/10.12913/22998624/86475
 

FEM Modelling of a Helical Wedge Rolling Process for Axisymmetric Parts
Zbigniew Pater, Janusz Tomczak
Adv. Sci. Technol. Res. J. 2018; 12(1):115-126
DOI: https://doi.org/10.12913/22998624/81767
 

Operational Properties of Anti-graffiti Coating Systems for Rolling Stock
Łukasz Pasieczyński, Jolanta Radziszewska-Wolińska, Norbert Radek
Adv. Sci. Technol. Res. J. 2018; 12(1):127-134
DOI: https://doi.org/10.12913/22998624/85705
 

Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Izabela Miturska, Anna Rudawska, Paweł Niedziałkowski, Jakub Szabelski, Dominik Grzesiczak
Adv. Sci. Technol. Res. J. 2018; 12(1):135-141
DOI: https://doi.org/10.12913/22998624/86258
 

The Effects of Vehicle Load on Driving Characteristics
Vladimir Rievaj, Ján Vrábel, František Synák, Ladislav Bartuška
Adv. Sci. Technol. Res. J. 2018; 12(1):142-149
DOI: https://doi.org/10.12913/22998624/80896
 

Hob Identification Methods
Andrzej Piotrowski
Adv. Sci. Technol. Res. J. 2018; 12(1):150-161
DOI: https://doi.org/10.12913/22998624/81801
 

The Evaluation of Properties of Mechanically Clinched Joints Made of Ferrous and Non-Ferrous Materials
Ľuboš Kaščák, Emil Spišák, René Kubík, Janka Majerníková
Adv. Sci. Technol. Res. J. 2018; 12(1):162-170
DOI: https://doi.org/10.12913/22998624/85659
 

Application of MCDA in Selection of Different Mining Methods and Solutions
Dejan Stevanović, Milena Lekić, Daniel Krzanovic, Ivica Ristović
Adv. Sci. Technol. Res. J. 2018; 12(1):171-180
DOI: https://doi.org/10.12913/22998624/85804
 

The Influence of the Tool Surface Texture on Friction and the Surface Layers Properties of Formed Component
Jana Šugárová, Peter Šugár, Martin Frnčík, Martin Necpal, Jana Moravčíková, Martin Kusý
Adv. Sci. Technol. Res. J. 2018; 12(1):181-193
DOI: https://doi.org/10.12913/22998624/85704
 

Simulation of Material Flow Through a Sample Divider
Jiří Rozbroj, Jan Nečas, David Žurovec, Jakub Hlosta, Daniel Gelnar, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2018; 12(1):194-199
DOI: https://doi.org/10.12913/22998624/85663
 

Device Designed for Detection and Setting the Required Tensile Force in Ropes
Leopold Hrabovský, Marinko Maslarić
Adv. Sci. Technol. Res. J. 2018; 12(1):200-206
DOI: https://doi.org/10.12913/22998624/86614
 

Comparison of Conventional and Hybrid Cars Exploitation Costs
Saugirdas Pukalskas, Alfredas Rimkus, Mindaugas Melaika, Robertas Peceliunas
Adv. Sci. Technol. Res. J. 2018; 12(1):221-227
DOI: https://doi.org/10.12913/22998624/86259
 

Possibility of Increasing Vehicle Energy Balance Using Coasting
Martin Mruzek, Dalibor Barta, Robert Labuda, Tomas Skrucany, Leszek Gardyński
Adv. Sci. Technol. Res. J. 2018; 12(1):228-235
DOI: https://doi.org/10.12913/22998624/86215
 

Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Tomáš Zlámal, Jiří Hajnyš, Jana Petrů, Ivan Mrkvica
Adv. Sci. Technol. Res. J. 2018; 12(1):236-243
DOI: https://doi.org/10.12913/22998624/86262
 

The Design of Method Intended for Implementation of Collaborative Assembly Tasks
Vladimir Tlach, Ivan Kuric, Ivan Zajačko, Darina Kumičáková, Alexander Rengevič
Adv. Sci. Technol. Res. J. 2018; 12(1):244-250
DOI: https://doi.org/10.12913/22998624/86476
 

Advanced Time-Frequency Representation in Voice Signal Analysis
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2018; 12(1):251-259
DOI: https://doi.org/10.12913/22998624/87028
 

Synthesis and Activity Evaluation of Ce-Mn-Cu Mixed Oxide Catalyst for Selective Oxidation of CO in Automobile Engine Exhaust: Effect of Ce/Mn Loading Content on Catalytic Activity
Yasir Bilal, Muhammad Ali Nasir, Sadia Nasreen, Niaz Ahmed Akhter, Riffat Asim Pasha, Muhammad Farhan Noor
Adv. Sci. Technol. Res. J. 2018; 12(1):260-266
DOI: https://doi.org/10.12913/22998624/81190
 

Studying the Effect of Finishing Work on the Geometric Accuracy of the Laser Cut Elements
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2018; 12(1):267-272
DOI: https://doi.org/10.12913/22998624/87042
 

Fractional Order Based Computed Torque Control of 2-link Robotic Arm
Haris Anwaar, Yin Yixin, Salman Ijaz, Muhammad Ammar Ashraf, Waqas Anwaar
Adv. Sci. Technol. Res. J. 2018; 12(1):273-284
DOI: https://doi.org/10.12913/22998624/85658
 

The Influence of Microstructure of Arc Sprayed Coatings on Wear Resistance
Daniel Tomasz Majewski, Tadeusz Hejwowski, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2018; 12(1):285-292
DOI: https://doi.org/10.12913/22998624/86210
 

Buckling Deformation of Thin Layer Coverings of Small Curvatures Used in Aircraft Construction.
Tomasz Kopecki, Przemysław Mazurek, Tomasz Lis, Jerzy Bakunowicz
Adv. Sci. Technol. Res. J. 2018; 12(1):293-302
DOI: https://doi.org/10.12913/22998624/85660
 

Design and Modelling of a Light Duty Trencher for Local Conditions
Hirpa G. Lemu, Delesa Kejela
Adv. Sci. Technol. Res. J. 2018; 12(1):303-311
DOI: https://doi.org/10.12913/22998624/85661
 

Assessment of the Possibility of Applying Ceramic Materials in Common Rail Injection Systems
Mateusz Bor, Wojciech Karpiuk, Mikołaj Krakowiak, Tomasz Borowczyk, Rafał Smolec
Adv. Sci. Technol. Res. J. 2018; 12(1):312-321
DOI: https://doi.org/10.12913/22998624/85706
 

Acoustic Camera as a Fool for Identifying Machinery and Equipment Failures
Ľudmila Pavlikova, Beata Hricová, Ervín Lumnitzer
Adv. Sci. Technol. Res. J. 2018; 12(1):322-328
DOI: https://doi.org/10.12913/22998624/87110
 

Influence and Optimization of the Setting of Input Parameters of Laser Profilometry by the Surface Measurement Manufactured by the AWJ Technology
Gerhard Mital, Ivan Gajdoš, Juraj Ruzbarsky, Tomasz Jachowicz, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2018; 12(1):329-337
DOI: https://doi.org/10.12913/22998624/86474
 

Assessment of the Manufacturing Possibility of Thin-Walled Robotic Portals for Conveyor Worklace
Peter Michalik, Jozef Dobransky, Leopold Hrabovsky, Michal Petruš
Adv. Sci. Technol. Res. J. 2018; 12(1):338-345
DOI: https://doi.org/10.12913/22998624/87063
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top