PL EN
 
PL EN
Current issue
About the Journal
Scientific Board
Editorial Office and Publisher
Article Processing Charge
Open Access

Topic Machinery, technology and equipment

 

Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 2. Angular Correction of the Gear Profile
Myron Czerniec
Adv. Sci. Technol. Res. J. 2019; 13(2):1-6
DOI: https://doi.org/10.12913/22998624/99038
 

CFD study of the Effect of Piston Crevice Volume on the Temperature Distribution in a Rapid Compression Machine
Oku Ekpenyong Nyong, Celestine Ebieto, Ene Ekpo Bassey, Ikem Azorshubel Ikem
Adv. Sci. Technol. Res. J. 2019; 13(1):46-51
DOI: https://doi.org/10.12913/22998624/103380
 

Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2019; 13(1):29-36
DOI: https://doi.org/10.12913/22998624/100630
 

Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 1. Height Correction of the Gear Profile
Myron Czerniec
Adv. Sci. Technol. Res. J. 2019; 13(1):52-59
DOI: https://doi.org/10.12913/22998624/99037
 

Comparative Aspects of Nanoparticles in Relation to Extending Shelf-Life of Molds
Jan Novotný, Irena Lysoňková, Jaromír Cais, Štefan Michna
Adv. Sci. Technol. Res. J. 2019; 13(1):110-115
DOI: https://doi.org/10.12913/22998624/92105
 

Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2018; 12(4):207-215
DOI: https://doi.org/10.12913/22998624/100499
 

Conveyor Failure Diagnostics Using Sound Visualization Technique
Marek Moravec, Miroslav Badida, Miroslava Jamborova, Anna Badidova
Adv. Sci. Technol. Res. J. 2018; 12(4):144-150
DOI: https://doi.org/10.12913/22998624/100352
 

Experience of the Crane Steel Wire Ropes Non-Destructive Tests
Pavel Peterka, Jozef Krešák, Marek Vojtko
Adv. Sci. Technol. Res. J. 2018; 12(4):157-163
DOI: https://doi.org/10.12913/22998624/100350
 

Analysis and Classification of Noise Sources of Conveyor Systems by Sound Visualizing on the Postal Package Sorting Line
Pavol Liptai, Ervin Lumnitzer, Marek Moravec, Miriama Piňosová
Adv. Sci. Technol. Res. J. 2018; 12(4):172-176
DOI: https://doi.org/10.12913/22998624/100348
 

The Effect of Valley Location in Two-Process Surface Topography Analysis
Przemysław Podulka
Adv. Sci. Technol. Res. J. 2018; 12(4):97-102
DOI: https://doi.org/10.12913/22998624/100343
 

An Impact of Technological Conditions on Surface Burning in Grinding of the Orbit
Dana Stančeková, Jozef Mrázik, Iwona Katarzyna Rybicka, Nataša Náprstková, Pavel Kraus
Adv. Sci. Technol. Res. J. 2018; 12(4):19-27
DOI: https://doi.org/10.12913/22998624/92104
 

THE INFLUENCE OF AUXILARY SUPPLEMENTS ADDED IN THE EXTRUSION PROCESS TO REDUCE THE FRICTION OF A POLYMERIC FOIL
Sebastian Białasz
Adv. Sci. Technol. Res. J. 2018; 12(3):250-256
DOI: https://doi.org/10.12913/22998624/95178
 

INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2018; 12(3):242-249
DOI: https://doi.org/10.12913/22998624/95056
 

RESEARCH OF POLYMERIC EXTRUDATE WITH SEGMENT-WALL CONSTRUCTION
Isidoro Martinez Mateo, Sebastian Białasz
Adv. Sci. Technol. Res. J. 2018; 12(3):216-222
DOI: https://doi.org/10.12913/22998624/95015
 

OBJECTIVE AND SUBJECTIVE EVALUATION OF THE RISK PHYSICAL FACTORS NEAR TO CONVEYOR SYSTEM
Miriama Piňosová, Miriam Andejiová, Pavol Liptai, Ervin Lumnitzer
Adv. Sci. Technol. Res. J. 2018; 12(3):188-196
DOI: https://doi.org/10.12913/22998624/94964
 

OPTIMIZATION OF MANIPULATION LOGISTICS USING DATA MATRIX CODES
Elena Pivarciova, Ladislav Karrach, Zuzana Tučková
Adv. Sci. Technol. Res. J. 2018; 12(3):173-180
DOI: https://doi.org/10.12913/22998624/94961
 

NANOSECOND YB FIBRE LASER MILLING OF ALLUMINIUM BRONZE: EFFECT OF PROCESS PARAMETERS ON THE SURFACE FINISH
Peter Šugár, Jana Šugárová, Martin Frnčík, Barbora Ludrovcová
Adv. Sci. Technol. Res. J. 2018; 12(3):10-15
DOI: https://doi.org/10.12913/22998624/93613
 

INFLUENCE OF PARAMETERS OF MILLING PROCESS ON THE ENERGY CONSUMPTION OF THE MACHINE TOOL
Wojciech Borkowski, Wacław Skoczyński, Paweł Piórkowski, Tomasz Jankowski, Andrzej Roszkowski, Michał Foremniak
Adv. Sci. Technol. Res. J. 2018; 12(3):24-31
DOI: https://doi.org/10.12913/22998624/93612
 

DRAFT JIG STRUCTURE DESIGN FOR MEASURING DEFORMATION OF THIN-WALLED ROBOTIC OR CONVEYOR COMPONENTS
Peter Michalik, Jozef Zajac, Luboslav Straka, Martin Ambrozy, Lukasz Nowakowski
Adv. Sci. Technol. Res. J. 2018; 12(3):55-60
DOI: https://doi.org/10.12913/22998624/92340
 

NUMERICAL MODELED STATIC STRESS-DEFORMED STATE OF PARALLEL PIPES IN THE DEFORMABLE ENVIRONMENT
Ismoil Ibrohimovich Safarov
Adv. Sci. Technol. Res. J. 2018; 12(3):114-125
DOI: https://doi.org/10.12913/22998624/92177
 

QUANTIFICATION OF ROAD VEHICLE PERFORMANCE PARAMETERS UNDER LABORATORY CONDITIONS
Branislav Šarkan, Ondrej Stopka
Adv. Sci. Technol. Res. J. 2018; 12(3):16-23
DOI: https://doi.org/10.12913/22998624/92107
 

RESEARCH OF COMPOSITE MATERIALS USED IN THE CONSTRUCTION OF VEHICLE BODYWORK
Leszek Gardyński, Jacek Caban, Dalibor Barta
Adv. Sci. Technol. Res. J. 2018; 12(3):181-187
DOI: https://doi.org/10.12913/22998624/92096
 

PROPOSAL OF CONTENT MAINTENANCE OF CNC MACHINE USING METHODS RELIABILITY CENTERED MAINTENANCE
Vladimír Stuchlý, Roman Poprocký, Nadežda Čuboňová, Ivan Kuric
Adv. Sci. Technol. Res. J. 2018; 12(3):126-133
DOI: https://doi.org/10.12913/22998624/92094
 

LOCKING THE MOVEMENT OF PERSONS ON THE BRIDGE CRANE
Jozef Kuľka, Martin Mantič, Melichar Kopas, Eva Faltinova
Adv. Sci. Technol. Res. J. 2018; 12(2):260-265
DOI: https://doi.org/10.12913/22998624/92459
 

RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Yuri Turygin, Pavol Bozek, Ivan Abaramov, Yury Nikitin
Adv. Sci. Technol. Res. J. 2018; 12(2):274-290
DOI: https://doi.org/10.12913/22998624/92298
 

ASSESSMENT OF THE POSSIBILITY OF USING AN UNMANNED AIRCRAFT CLASS MINI TO ILLUMINATE TARGETS BY LASER
Andrzej Rypulak
Adv. Sci. Technol. Res. J. 2018; 12(2):106-111
DOI: https://doi.org/10.12913/22998624/92111
 

DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Gabriel Fedorko, Hana Neradilová, Juraj Jackanin
Adv. Sci. Technol. Res. J. 2018; 12(2):170-179
DOI: https://doi.org/10.12913/22998624/92108
 

THE ANALYSIS OF THE TRAFFIC SIGNS VISIBILITY DURING NIGHT DRIVING
Radovan Madleňák, Lucia Madleňáková, Dominika Hoštáková, Pawel Drozdziel, Adam Török
Adv. Sci. Technol. Res. J. 2018; 12(2):71-76
DOI: https://doi.org/10.12913/22998624/92103
 

EVALUATION CRITERIA OF THE BELT CONVEYOR USING THE AHP METHOD AND SELECTION THE RIGHT CONVEYOR BY HURWITZ METHOD
Petr Průša, Stefan Jovčic, Svetlana Nikolicic
Adv. Sci. Technol. Res. J. 2018; 12(2):137-143
DOI: https://doi.org/10.12913/22998624/92092
 

ANALYSIS OF POSSIBILITIES TO IMPROVE ENVIRONMENTAL OPERATING PARAMETERS OF MODERN COMPRESSION – IGNITION ENGINES
Tomasz Osipowicz, Karol Franciszek Abramek, Dalibor Barta, Paweł Droździel, Maciej Lisowski
Adv. Sci. Technol. Res. J. 2018; 12(2):206-213
DOI: https://doi.org/10.12913/22998624/91892
 

MEASURING OF MECHANICAL RESISTANCES OF A HEAVY GOOD VEHICLE BY COASTDOWN TEST
Tomáš Skrúcaný, Štefánia Semanová, Martin Kendra, Tomasz Figlus, Ján Vrábel
Adv. Sci. Technol. Res. J. 2018; 12(2):214-221
DOI: https://doi.org/10.12913/22998624/91889
 

MODIFICATIONS AlSi7Mg0.3 ALLOYS TROUGH Ca, Sr AND Sb
Jaromír Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2018; 12(2):180-187
DOI: https://doi.org/10.12913/22998624/91886
 

INFLUENCE OF REDM PARAMETERS ON SURFACE’S SHAPE
Zbigniew Gulbinowicz, Olgierd Janusz Goroch
Adv. Sci. Technol. Res. J. 2018; 12(2):89-96
DOI: https://doi.org/10.12913/22998624/87065
 

MODELING OF SELECTED DESIGN CHARACTERISTICS OF CAM AND HYPOCYCLOIDAL DRIVES OF HIGH-PRESSURE FUEL PUMPS
Mateusz Bor, Tomasz Borowczyk, Wojciech Karpiuk, Rafał Smolec
Adv. Sci. Technol. Res. J. 2018; 12(2):128-136
DOI: https://doi.org/10.12913/22998624/87064
 

EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adam Gnatowski, Marcin Sosnowski, Anna Pajdak, Jacek Sobczyk
Adv. Sci. Technol. Res. J. 2018; 12(2):42-51
DOI: https://doi.org/10.12913/22998624/78517
 

GRADIENT COMPOSITE COATINGS FOR WORKING SURFACES OF BRAKING DEVICES
Mykhaylo Pashechko, Myroslav Kindrachuk, Ihor Humeniuk, Taras Berezhanskyi
Adv. Sci. Technol. Res. J. 2018; 12(2):1-5
DOI: https://doi.org/10.12913/22998624/70759
 

Assessment of the Manufacturing Possibility of Thin-Walled Robotic Portals for Conveyor Worklace
Peter Michalik, Jozef Dobransky, Leopold Hrabovsky, Michal Petruš
Adv. Sci. Technol. Res. J. 2018; 12(1):338-345
DOI: https://doi.org/10.12913/22998624/87063
 

Device Designed for Detection and Setting the Required Tensile Force in Ropes
Leopold Hrabovský, Marinko Maslarić
Adv. Sci. Technol. Res. J. 2018; 12(1):200-206
DOI: https://doi.org/10.12913/22998624/86614
 

Influence and Optimization of the Setting of Input Parameters of Laser Profilometry by the Surface Measurement Manufactured by the AWJ Technology
Gerhard Mital, Ivan Gajdoš, Juraj Ruzbarsky, Tomasz Jachowicz, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2018; 12(1):329-337
DOI: https://doi.org/10.12913/22998624/86474
 

Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Tomáš Zlámal, Jiří Hajnyš, Jana Petrů, Ivan Mrkvica
Adv. Sci. Technol. Res. J. 2018; 12(1):236-243
DOI: https://doi.org/10.12913/22998624/86262
 

Comparison of Conventional and Hybrid Cars Exploitation Costs
Saugirdas Pukalskas, Alfredas Rimkus, Mindaugas Melaika, Robertas Peceliunas
Adv. Sci. Technol. Res. J. 2018; 12(1):221-227
DOI: https://doi.org/10.12913/22998624/86259
 

Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Izabela Miturska, Anna Rudawska, Paweł Niedziałkowski, Jakub Szabelski, Dominik Grzesiczak
Adv. Sci. Technol. Res. J. 2018; 12(1):135-141
DOI: https://doi.org/10.12913/22998624/86258
 

Possibility of Increasing Vehicle Energy Balance Using Coasting
Martin Mruzek, Dalibor Barta, Robert Labuda, Tomas Skrucany, Leszek Gardyński
Adv. Sci. Technol. Res. J. 2018; 12(1):228-235
DOI: https://doi.org/10.12913/22998624/86215
 

Application of MCDA in Selection of Different Mining Methods and Solutions
Dejan Stevanović, Milena Lekić, Daniel Krzanovic, Ivica Ristović
Adv. Sci. Technol. Res. J. 2018; 12(1):171-180
DOI: https://doi.org/10.12913/22998624/85804
 

Assessment of the Possibility of Applying Ceramic Materials in Common Rail Injection Systems
Mateusz Bor, Wojciech Karpiuk, Mikołaj Krakowiak, Tomasz Borowczyk, Rafał Smolec
Adv. Sci. Technol. Res. J. 2018; 12(1):312-321
DOI: https://doi.org/10.12913/22998624/85706
 

The Influence of the Tool Surface Texture on Friction and the Surface Layers Properties of Formed Component
Jana Šugárová, Peter Šugár, Martin Frnčík, Martin Necpal, Jana Moravčíková, Martin Kusý
Adv. Sci. Technol. Res. J. 2018; 12(1):181-193
DOI: https://doi.org/10.12913/22998624/85704
 

Design and Modelling of a Light Duty Trencher for Local Conditions
Hirpa G. Lemu, Delesa Kejela
Adv. Sci. Technol. Res. J. 2018; 12(1):303-311
DOI: https://doi.org/10.12913/22998624/85661
 

A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication and Minimum Quantity Lubrication
Muhammad Ahsan Ul Haq, Aqib Mashood Khan, Le Gong, Tao Xu, Longhui Meng, Salman Hussain
Adv. Sci. Technol. Res. J. 2018; 12(1):99-105
DOI: https://doi.org/10.12913/22998624/85629
 

Hob Identification Methods
Andrzej Piotrowski
Adv. Sci. Technol. Res. J. 2018; 12(1):150-161
DOI: https://doi.org/10.12913/22998624/81801
 

Analysis of the Effect of Wire Electric Dischage Machining Process Parameters for the Formation of High Speed Steel Form Tool
Kashif Ishfaq, Nadeem Ahmad Mufti, Jawad Ahmad, Muhammad Sajid, Mirza Jahanzaib
Adv. Sci. Technol. Res. J. 2018; 12(1):89-98
DOI: https://doi.org/10.12913/22998624/81001
 

Acceptance and Reverification of CMM in Industrial Conditions
Robert Grzegorz Koteras, Michał Wieczorowski, Piotr Znaniecki
Adv. Sci. Technol. Res. J. 2018; 12(1):80-88
DOI: https://doi.org/10.12913/22998624/80987
 

The Effects of Vehicle Load on Driving Characteristics
Vladimir Rievaj, Ján Vrábel, František Synák, Ladislav Bartuška
Adv. Sci. Technol. Res. J. 2018; 12(1):142-149
DOI: https://doi.org/10.12913/22998624/80896
 

The Effect of Plunge Depth on the Strength Properties of Friction Welded Joints Using the RFSSW Method
Rafał Kluz, Andrzej Kubit, Dawid Wydrzyński
Adv. Sci. Technol. Res. J. 2018; 12(1):41-47
DOI: https://doi.org/10.12913/22998624/76547
 

Finite Elements Strenght Analysis of a Compressor Consisting of Four Helical Rotors
Aleksander Nieoczym, Karol Szklarek
Adv. Sci. Technol. Res. J. 2018; 12(1):1-8
DOI: https://doi.org/10.12913/22998624/73822
 

Utilisation of Kinect Sensors for the Design of a Human-Robot Collaborative Workcell
Darina Kumičáková, Alexander Rengevič, Miroslav Císar, Vladimír Tlach
Adv. Sci. Technol. Res. J. 2017; 11(4):270-278
DOI: https://doi.org/10.12913/22998624/80937
 

Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
Tomáš Zlámal, Jiří Hajnyš, Jana Petrů, Ivan Mrkvica
Adv. Sci. Technol. Res. J. 2017; 11(4):286-293
DOI: https://doi.org/10.12913/22998624/80925
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
DOI: https://doi.org/10.12913/22998624/80901
 

Research on Inner Surface of Tubes Hydroformed
Vasile Adrian Ceclan, Sorin Dumitru Grozav, Ivan Kuric
Adv. Sci. Technol. Res. J. 2017; 11(4):311-317
DOI: https://doi.org/10.12913/22998624/80900
 

Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
Wiktor Harmatys, Adam Gąska, Maciej Gruza, Piotr Gąska, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2017; 11(4):305-310
DOI: https://doi.org/10.12913/22998624/80893
 

Influence of Polylactide Modification with Blowing Agents on Selected Mechanical Properties
Aneta Tor-Świątek, Tomasz Garbacz, Vladimir Sedlarik, Petr Stloukal, Pavel Kucharczyk
Adv. Sci. Technol. Res. J. 2017; 11(4):206-214
DOI: https://doi.org/10.12913/22998624/80850
 

Possibilities of Belzona Adhesive Joints Application for Austenitic Steel Used in Ship Constructions
Wojciech Jurczak, Kamil Jurczak
Adv. Sci. Technol. Res. J. 2017; 11(4):134-140
DOI: https://doi.org/10.12913/22998624/80842
 

The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Stanisław Bławucki, Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2017; 11(4):260-269
DOI: https://doi.org/10.12913/22998624/80841
 

The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Michał Jakubowicz, Janusz Dereżyński
Adv. Sci. Technol. Res. J. 2017; 11(4):198-205
DOI: https://doi.org/10.12913/22998624/79830
 

Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Tomáš Stejskal, Miroslav Dovica, Peter Demeč, Jozef Svetlik, Viktoria Rajtukova
Adv. Sci. Technol. Res. J. 2017; 11(4):159-167
DOI: https://doi.org/10.12913/22998624/78669
 

Increasing of Durability of Cutting Tools
Emil Spišák, Janka Majernikova
Adv. Sci. Technol. Res. J. 2017; 11(4):141-146
DOI: https://doi.org/10.12913/22998624/78168
 

Electrochemical Grinding of Titanium-Containing Materials
Krzysztof Przystupa, Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(4):183-188
DOI: https://doi.org/10.12913/22998624/78167
 

Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Izabela Miturska, Anna Rudawska, Piotr Pawlak, Dana Stančeková, Mateusz Chyra
Adv. Sci. Technol. Res. J. 2017; 11(4):97-102
DOI: https://doi.org/10.12913/22998624/78165
 

Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Gurkan Irsel
Adv. Sci. Technol. Res. J. 2017; 11(4):83-96
DOI: https://doi.org/10.12913/22998624/77069
 

Peg-on-Hole: Fundamental Principles of Motion of a Peg Leaning on a Horizontal Hole Edge
Dmitry Simakov, Ludmila Chernyakhovskaya
Adv. Sci. Technol. Res. J. 2017; 11(4):49-59
DOI: https://doi.org/10.12913/22998624/77036
 

Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Olgierd Janusz Goroch, Zbigniew Gulbinowicz
Adv. Sci. Technol. Res. J. 2017; 11(4):111-122
DOI: https://doi.org/10.12913/22998624/76857
 

Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft
Łukasz Wójcik, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2017; 11(4):60-67
DOI: https://doi.org/10.12913/22998624/75966
 

The Effect of Selected Conditions in a Thermoforming Process on Wall Thickness Variations
Emil Sasimowski
Adv. Sci. Technol. Res. J. 2017; 11(4):41-48
DOI: https://doi.org/10.12913/22998624/73818
 

Impact of the Technological Conditions of Plane Surface Machining on a Triangular Milling Cutter on the Residual Hysteresis of the Movement Axis of the Machine
Jan Kral, Tomáš Stejskal, Jaroslav Melko, Ľudmila Pavlikova, Adrián Rjabušin, Vladimír Rudy
Adv. Sci. Technol. Res. J. 2017; 11(3):240-245
DOI: https://doi.org/10.12913/22998624/76710
 

Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints
Kamil Anasiewicz, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2017; 11(3):270-276
DOI: https://doi.org/10.12913/22998624/76480
 

Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Andrzej Maruszczyk, Agata Dudek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2017; 11(3):204-210
DOI: https://doi.org/10.12913/22998624/76450
 

Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Jan Nečas, Jakub Hlosta, David Žurovec, Martin Žídek, Jiří Rozbroj, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2017; 11(3):246-252
DOI: https://doi.org/10.12913/22998624/76100
 

An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Jan Buša, Jan Buša Jr,, Miroslav Dovica, Michal Fabián, Peter Izol, Stanislav Honus
Adv. Sci. Technol. Res. J. 2017; 11(3):223-232
DOI: https://doi.org/10.12913/22998624/76094
 

Proposal of the Sound Insulating Measures for Vibrational Sorter and Verification of the Effectiveness Measures
Pavol Liptai, Marek Moravec, Ervin Lumnitzer, Marcela Gergeľová
Adv. Sci. Technol. Res. J. 2017; 11(3):196-203
DOI: https://doi.org/10.12913/22998624/76068
 

The Use of Lean Manufacturing Techniques – SMED Analysis to Optimization of the Production Process
Dusan Sabadka, Vieroslav Molnar, Gabriel Fedorko
Adv. Sci. Technol. Res. J. 2017; 11(3):187-195
DOI: https://doi.org/10.12913/22998624/76067
 

Variable Valve Timing Scheduling in a 4-Stroke Internal Combustion Cylinder Utilizing Artificial Neural Networks
Sepehr Bapiri, Omid Chaghaneh, Hossein Ghomashi
Adv. Sci. Technol. Res. J. 2017; 11(3):114-121
DOI: https://doi.org/10.12913/22998624/75968
 

Modeling of Thermal Cycle CI Engine with Multi-Stage Fuel Injection
Arkadiusz Jamrozik, Wojciech Tutak, Adam Gnatowski, Renata Gnatowska, Jerzy Winczek, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2017; 11(3):179-186
DOI: https://doi.org/10.12913/22998624/75967
 

Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Gurkan Irsel
Adv. Sci. Technol. Res. J. 2017; 11(3):150-163
DOI: https://doi.org/10.12913/22998624/75887
 

Local Resistance of Heating Molybdenum Sheet in a Test Device
Michal Mitka, Ronald Bastovansky, Frantisek Brumercik, Piotr Ignaciuk
Adv. Sci. Technol. Res. J. 2017; 11(3):87-93
DOI: https://doi.org/10.12913/22998624/74182
 

Analysis of Fiber Orientation in the Wood-Polymer Composites (WPC) on Selected Examples
Wiesław Jan Frącz, Grzegorz Janowski
Adv. Sci. Technol. Res. J. 2017; 11(3):122-129
DOI: https://doi.org/10.12913/22998624/71150
 

An Experimental Study on Wall Thickness Distribution in Thermoforming
Sencer Süreyya Karabeyoglu, Olcay Ekşi, Ertuğrul Selçuk Erdoğan
Adv. Sci. Technol. Res. J. 2017; 11(3):139-142
DOI: https://doi.org/10.12913/22998624/71148
 

THE STUDY OF THE SURFACE QUALITY OF THE THIN WALL BEARING UNITS TO ROLLS ROLLER SEATS PIPE CONVEYOR
Peter Michalik, Jozef Zajac, Jana Fabianova, Dusan Mital
Adv. Sci. Technol. Res. J. 2017; 11(2):192-197
DOI: https://doi.org/10.12913/22998624/74102
 

CNC MILLING MACHINE PRECISION ANALYSIS THROUGH NUMERICAL MODELLING
Jozef Svetlík, Peter Demeč, Jan Kral
Adv. Sci. Technol. Res. J. 2017; 11(2):212-219
DOI: https://doi.org/10.12913/22998624/71182
 

NECESSITY OF WIRE ROPE REPLACEMENT IN CRANE LIFTING EQUIPMENT AFTER CHANGE OF CRANE OPERATIONAL PARAMETERS
Jozef Kuľka, Martin Mantič, Melichar Kopas, Eva Faltinová
Adv. Sci. Technol. Res. J. 2017; 11(2):226-230
DOI: https://doi.org/10.12913/22998624/71180
 

THE EFFECT OF PROCESS PARAMETERS ON THICKNESS DISTRIBUTION IN THERMOFORMING
Olcay Eksi, Sencer Süreyya Karabeyoğlu
Adv. Sci. Technol. Res. J. 2017; 11(2):198-204
DOI: https://doi.org/10.12913/22998624/71147
 

MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Marta Burdzińska, Michalina Jankowska
Adv. Sci. Technol. Res. J. 2017; 11(2):166-171
DOI: https://doi.org/10.12913/22998624/70997
 

A PRESSURE-BUBBLE VACUUM FORMING PROCESS FOR POLYSTYRENE SHEET
Emil Sasimowski
Adv. Sci. Technol. Res. J. 2017; 11(2):180-186
DOI: https://doi.org/10.12913/22998624/70801
 

OVERVIEW OF THE RESEARCH ON ROLL FORGING PROCESSES
Zbigniew Pater, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2017; 11(2):72-86
DOI: https://doi.org/10.12913/22998624/70645
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159-165
DOI: https://doi.org/10.12913/22998624/69680
 

DEDICATED EXHAUST GAS RECIRCULATION IN SPARK IGNITION ENGINES
Sooraj Rehan
Adv. Sci. Technol. Res. J. 2017; 11(2):44-50
DOI: https://doi.org/10.12913/22998624/69339
 

KINEMATIC SYNTHESIS OF LINKAGE MECHANISMS USING BURMESTER POINTS AT THE GIVEN DWELL DURATION OF THE OUTPUT LINK
Viacheslav Oleksandrovych Kharzhevskyi
Adv. Sci. Technol. Res. J. 2017; 11(2):139-145
DOI: https://doi.org/10.12913/22998624/68465
 

THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS
Anna Rudawska, Katarzyna Głogowska, Tetiana Vitenko, Dana Stančeková, Nadežda Čuboňová, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2017; 11(2):8-16
DOI: https://doi.org/10.12913/22998624/67377
 

MONITORING OF CUTTING CONDITIONS WITH THE EMPIRICAL MODE DECOMPOSITION
Piotr Krzysztof Wolszczak, Grzegorz Litak, Krystian Łygas
Adv. Sci. Technol. Res. J. 2017; 11(1):96-103
DOI: https://doi.org/10.12913/22998624/68467
 

SAVITZKY-GOLAY METHOD FOR THE EVALUATION OF DECELERATION OF THE FIRCTION LIFT
Paweł Lonkwic, Kamil Szydło, Szymon Molski
Adv. Sci. Technol. Res. J. 2017; 11(1):138-146
DOI: https://doi.org/10.12913/22998624/68459
 

CNG INJECTOR RESEARCH FOR DUAL FUEL ENGINE
Adam Majczak, Grzegorz Barański, Rafał Sochaczewski, Ksenia Siadkowska
Adv. Sci. Technol. Res. J. 2017; 11(1):212-219
DOI: https://doi.org/10.12913/22998624/68458
 

INFLUENCE OF SELECTED CUTTING CONDITIONS ON CUTTING FORCES
Augustín Görög, Dana Stančeková, Mária Kapustová, Ingrid Görögová, Izabela Miturska
Adv. Sci. Technol. Res. J. 2017; 11(1):179-185
DOI: https://doi.org/10.12913/22998624/66508
 

INFLUENCE TOOL WEAR IN MATERIAL FLOW
Vladimíra Schindlerová, Ivana Šajdlerová
Adv. Sci. Technol. Res. J. 2017; 11(1):161-165
DOI: https://doi.org/10.12913/22998624/66507
 

EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45
Jiří Kratochvíl, Jana Petrů, Marek Pagáč, Jozef Holubják, Jozef Mrazik
Adv. Sci. Technol. Res. J. 2017; 11(1):173-178
DOI: https://doi.org/10.12913/22998624/66506
 

REDUCING ENERGY CONSUMPTION BY PASSENGER CAR WITH USING OF NON-ELECTRICAL HYBRID DRIVE TECHNOLOGY
Tomas Skrucany, Veronika Harantova, Martin Kendra, Dalibor Barta
Adv. Sci. Technol. Res. J. 2017; 11(1):166-172
DOI: https://doi.org/10.12913/22998624/66505
 

WORKSHOP PROGRAMMING AS PART OF TECHNOLOGICAL PREPARATION OF PRODUCTION
Tomáš Dodok, Nadežda Čuboňová, Ivan Kuric
Adv. Sci. Technol. Res. J. 2017; 11(1):111-116
DOI: https://doi.org/10.12913/22998624/66504
 

INFLUENCE OF THE HOMOGENIZATION TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF AlSi10CuNiMgMn ALLOY
Jaromir Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2017; 11(1):104-110
DOI: https://doi.org/10.12913/22998624/66503
 

INFLUENCE OF THE PATH TYPE ON SELECTED TECHNOLOGICAL EFFECTS IN THE TROCHOIDAL MILLING
Kamil Waszczuk, Paweł Karolczak, Magdalena Wisniewska, Maceiej Kowalski
Adv. Sci. Technol. Res. J. 2017; 11(1):147-153
DOI: https://doi.org/10.12913/22998624/66501
 

DETERMINATION OF RESIDUAL STRESS DISTRIBUTION IN HIGH STRENGTH ALUMINUM ALLOY AFTER EDM
Shahid Mehmood, Amir Sultan, Nazeer Ahmad Anjum, Waqas Anwar, Zubair Butt
Adv. Sci. Technol. Res. J. 2017; 11(1):29-35
DOI: https://doi.org/10.12913/22998624/68729
 

THE CHARACTERISTICS OF THE OPERATING PARAMETERS OF THE VERTICAL AXIS WIND TURBINE FOR THE SELECTED WIND SPEED
Zbigniew Czyż, Zdzisław Kamiński
Adv. Sci. Technol. Res. J. 2017; 11(1):58-65
DOI: https://doi.org/10.12913/22998624/68469
 

MICROSTRUCTURAL STUDY OF FAILURE PHENOMENA IN WC 94%-Co 6% HARD METAL ALLOY TIPS OF RADIAL PICKS
Sakuntala Nahak, Somnath Chattopadhyaya, Saurabh Dewangan, Sergej Hloch, Grzegorz Krolczyk, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2017; 11(1):36-47
DOI: https://doi.org/10.12913/22998624/68457
 

FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS
Emil Spišák, Janka Majerníková, Ľuboš Kaščák
Adv. Sci. Technol. Res. J. 2016; 10(32):248-253
DOI: https://doi.org/10.12913/22998624/65759
 

INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511
Jerzy Józwik, Dawid Ostrowski, Paweł Jarosz, Dariusz Mika
Adv. Sci. Technol. Res. J. 2016; 10(32):86-96
DOI: https://doi.org/10.12913/22998624/65136
 

THEORETICAL AND EXPERIMENTAL ANALYSIS OF ROTARY COMPRESSION OF BALL PINS HOLLOW FORGINGS
Janusz Tomczak, Tomasz Bulzak, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2016; 10(32):109-117
DOI: https://doi.org/10.12913/22998624/65129
 

INCREASING METROLOGICAL AUTONOMY OF IN-PLANT MEASURING SYSTEMS
Mykola Mykyychuk, Roman Kochan, Orest Kochan, Su Jun, Bohdan Stadnyk, Petro Stolyarchuk
Adv. Sci. Technol. Res. J. 2016; 10(32):193-197
DOI: https://doi.org/10.12913/22998624/65126
 

NUMERICAL MODELING OF SKEW ROLLING PROCESS OF TWIST DRILLS
Tomasz Adam Bulzak, Zbigniew Pater, Janusz Tomczak
Adv. Sci. Technol. Res. J. 2016; 10(32):124-131
DOI: https://doi.org/10.12913/22998624/65125
 

VISCOUS AND MAGNETIC FORCE ACTING IN A HIGH SPEED SOLENOID VALVE
Robert Goraj
Adv. Sci. Technol. Res. J. 2016; 10(32):132-143
DOI: https://doi.org/10.12913/22998624/65124
 

A MATHEMATICAL MODEL OF CHP 2000 TYPE PROGRESSIVE GEAR
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2016; 10(32):150-155
DOI: https://doi.org/10.12913/22998624/65120
 

THE RESEARCH ON AGEING OF GLYCOL-BASED BRAKE FLUIDS OF VEHICLES IN OPERATION
Jacek Caban, Paweł Droździel, Ján Vrábel, Branislav Šarkan, Andrzej Marczuk, Laszek Krzywonos, Iwona Rybicka
Adv. Sci. Technol. Res. J. 2016; 10(32):9-16
DOI: https://doi.org/10.12913/22998624/65113
 

APPLICATION OF CHEMICAL PRE-TREATMENT ON THE POLISHED SURFACE OF ALUMINIUM ALLOYS
Pavel Kraus, Jaroslava Svobodova, Jaromir Cais, Radek Lattner
Adv. Sci. Technol. Res. J. 2016; 10(32):17-23
DOI: https://doi.org/10.12913/22998624/65112
 

APPLICABILITY OF SELECTED GROUPS OF ROUGHNESS PARAMETERS FOR DESCRIPTION OF SURFACE LAYER OF FLAT - TOP “PLATEAU” STRUCTURES
Maciej Kowalski, Magdalena Wiśniewska, Paweł Karolczak, Dana Stancekova
Adv. Sci. Technol. Res. J. 2016; 10(32):32-39
DOI: https://doi.org/10.12913/22998624/65110
 

USING OF NON-CONVENTIONAL FUELS IN HYBRID VEHICLE DRIVES
Dalibor Barta, Martin Mruzek, Martin Kendra, Pawel Kordos, Leszek Krzywonos
Adv. Sci. Technol. Res. J. 2016; 10(32):240-247
DOI: https://doi.org/10.12913/22998624/65108
 

THE ISSUE OF DETERMINING THE GEOMETRIC POSITION DEVIATION OF THE THREADED HOLES
Pavol Martikáň, Mário Drbúl, Jozef Holubják, Jozef Mrázik, Richard Joch
Adv. Sci. Technol. Res. J. 2016; 10(32):47-52
DOI: https://doi.org/10.12913/22998624/65107
 

INFLUENCE OF THE THICKNESS OF Ni-P COATING APPLIED ON 7075 ALUMINUM ALLOY ON ITS HARDNESS
Kazimierz Czapczyk, Piotr Siwak, Piotr Jabłoński, Łukasz Furmański, Paweł Grobelny, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2016; 10(32):53-58
DOI: https://doi.org/10.12913/22998624/65106
 

ANALYTICAL INTELLIGENCE TOOLS FOR MULTICRITERIAL DIAGNOSTICS OF CNC MACHINES
Ivan Kuric, Ivan Zajačko, Miroslav Císar
Adv. Sci. Technol. Res. J. 2016; 10(32):59-64
DOI: https://doi.org/10.12913/22998624/65105
 

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
Tomáš Zlámal, Jana Petrů, Ondřej Vortel, Marek Pagáč, Pavel Krajkovič
Adv. Sci. Technol. Res. J. 2016; 10(31):144-150
DOI: https://doi.org/10.12913/22998624/64074
 

TASKRADAR: TASK VISUALISATION AND MONITORING WITHIN AUTOMOTIVE PRODUCT DEVELOPMENT LIFECYCLE USING SEMANTIC TECHNOLOGIES
Selver Softic, Manfred Rosenberger, Ioan Turcin, Alexander Stocker
Adv. Sci. Technol. Res. J. 2016; 10(31):124-129
DOI: https://doi.org/10.12913/22998624/64072
 

SYNTHESIS OF A PUMPING UNIT WITH CONSIDERATION OF A FLEXIBLE MEMBER IN THE SYSTEM
Alžbeta Sapietová, Michal Sekerka, Milan Vaško, Milan Sapieta
Adv. Sci. Technol. Res. J. 2016; 10(31):119-123
DOI: https://doi.org/10.12913/22998624/64069
 

THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Anna Rudawska, Dana Stančeková, Józef Brzęczek
Adv. Sci. Technol. Res. J. 2016; 10(31):109-118
DOI: https://doi.org/10.12913/22998624/64066
 

ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES
Miroslav Müller, Petr Valášek
Adv. Sci. Technol. Res. J. 2016; 10(31):87-93
DOI: https://doi.org/10.12913/22998624/64065
 

ANALYSIS OF THE PRE-ROTATION ENGINE LOADS IN THE AUTOGYRO
Zbigniew Czyż, Tomasz Łusiak, Daniel Czyz, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2016; 10(31):169-176
DOI: https://doi.org/10.12913/22998624/64015
 

NORMATIVE MEASUREMENTS OF NOISE AT CNC MACHINES WORK STATIONS
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2016; 10(30):138-143
DOI: https://doi.org/10.12913/22998624/63387
 

IDENTIFICATION AND MONITORING OF NOISE SOURCES OF CNC MACHINE TOOLS BY ACOUSTIC HOLOGRAPHY METHODS
Jerzy Józwik
Adv. Sci. Technol. Res. J. 2016; 10(30):127-137
DOI: https://doi.org/10.12913/22998624/63386
 

SELECTION OF REFERENCE PLANE BY THE LEAST SQUARES FITTING METHODS
Przemysław Podulka
Adv. Sci. Technol. Res. J. 2016; 10(30):164-175
DOI: https://doi.org/10.12913/22998624/62633
 

THEORETICAL AND EXPERIMENTAL ANALYSIS OF LOADING IMPACT FROM THE PROGRESSIVE GEAR ON THE LIFT BRAKING DISTANCE WITH THE USE OF THE FREE FALL METHOD
Paweł Lonkwic, Patryk Różyło
Adv. Sci. Technol. Res. J. 2016; 10(30):103-109
DOI: https://doi.org/10.12913/22998624/62628
 

ANALYSIS OF VIBROACOUSTIC SIGNALS RECORDED IN THE PASSENGER LIFT CABIN
Kamil Szydło, Paweł Maciąg, Rafał Longwic, Małgorzata Lotko
Adv. Sci. Technol. Res. J. 2016; 10(30):193-201
DOI: https://doi.org/10.12913/22998624/62627
 

TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS
Anna Rudawska, Nadežda Čuboňova, Kamila Pomarańska, Dana Stančeková Stančeková, Arkadiusz Gola
Adv. Sci. Technol. Res. J. 2016; 10(30):182-192
DOI: https://doi.org/10.12913/22998624/62513
 
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top