All issues
Volume 14, Issue 4, 2020
Impact of Accelerated Aging on the Performance Characteristics of "Green" Packaging Material of Polylactide
Adv. Sci. Technol. Res. J. 2020; 14(4):1–10
Selection of the Technological Ceramic Layer Thickness in an HPDC Machine Plunger in the Aspect of its Strength
Adv. Sci. Technol. Res. J. 2020; 14(4):11–20
Investigation of Harmful Chemical Compounds from Dual-Fuelled Diesel Engine
Adv. Sci. Technol. Res. J. 2020; 14(4):21–29
Analysis of the Selection of Compensation Devices Determining the Reactive Power Balance of Wind Farms
Adv. Sci. Technol. Res. J. 2020; 14(4):30–36
Temperature Measurement of Modern Cutting Tools During Turning
Karol Grochalski, Piotr Jabłoński, Rafał Talar, Paweł Twardowski, Michał Wieczorowski, Bartosz Jakubek, Wojciech Rukat
Adv. Sci. Technol. Res. J. 2020; 14(4):37–48
Analysis of Impact of Gust Angle and Velocity on the Position of Stagnation Point
Adv. Sci. Technol. Res. J. 2020; 14(4):49–57
Gravitation Auger Water Separator from a Suspension of Wet Bulk Material
Adv. Sci. Technol. Res. J. 2020; 14(4):58–67
Unrepeatability of the Fuel Injection and Combustion Processes in the Diesel Engine Fuelled with Renewable Fuel
Adv. Sci. Technol. Res. J. 2020; 14(4):68–77
A New Method of Flanges Extrusion in Hollow Products – Analysis of the Limiting Phenomena
Adv. Sci. Technol. Res. J. 2020; 14(4):78–85
Methodological Procedures Applied to the Manufacturing Systems Design
Adv. Sci. Technol. Res. J. 2020; 14(4):86–95
Characteristics of Polymer Materials with New Smart Utilities
Adv. Sci. Technol. Res. J. 2020; 14(4):96–103
Wind Tunnel Research on the Unmanned Aerial Vehicle Rotor Blade Setting Angle
Adv. Sci. Technol. Res. J. 2020; 14(4):104–114
The Study on the Damage of the Rear-Axle Shaft in a KIA Truck
Adv. Sci. Technol. Res. J. 2020; 14(4):115–124
The Use of Complex Networks Tools to Describe the Current State of Multidisciplinary Research in Poland
Adv. Sci. Technol. Res. J. 2020; 14(4):125–138
The Effect of the Aging Process on Selected Properties of Polypropylene Modified by Natural Fillers
Adv. Sci. Technol. Res. J. 2020; 14(4):139–147
Application of the Markov Chain Theory in Estimating the Strength of Fiber-Layered Composite Structures with Regard to Manufacturing Aspects
Adv. Sci. Technol. Res. J. 2020; 14(4):148–155
Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Adv. Sci. Technol. Res. J. 2020; 14(4):156–167
Modelling of Dynamic Interactions in the Fuel Rail for the Aircraft Diesel Engine
Adv. Sci. Technol. Res. J. 2020; 14(4):168–176
On the Question of Methodology of Hybrid Sliding Bearings Estimated Load Capacity and Durability Evaluation
Adv. Sci. Technol. Res. J. 2020; 14(4):177–184
Influence of the Size and Distribution of Load on the Damping Coefficient of Shock Absorbers in Passenger Vehicles
Adv. Sci. Technol. Res. J. 2020; 14(4):185–194
Heuristic Adaptive Control of Waste Gas Exhausting in Coke Making
Adv. Sci. Technol. Res. J. 2020; 14(4):195–212
Simple Optical Coordinate Measuring System, Based on Fiducial Markers Detection, and its Accuracy Assessment
Adv. Sci. Technol. Res. J. 2020; 14(4):213–219
Accuracy and Repeatability of Limb Scans Obtained on the Semi-Automatic Measuring Station
Adv. Sci. Technol. Res. J. 2020; 14(4):220–228
Influence of the Length of Components From Polymer Composite on Selected Machinability Indicators in the Circumferential Milling Process
Adv. Sci. Technol. Res. J. 2020; 14(4):229–239
Optimization of Welding Pliers Production for the Automotive Industry – Case Study
Adv. Sci. Technol. Res. J. 2020; 14(4):240–249
Statistical Comparison of the Hardness and Scratch-Resistance of the PMMA Polymers Used in Orthodontic Appliances
Ivo Domagała, Leszek Gil, Marcel Firlej, Daniel Pieniak, Jarosław Selech, Dawid Romek, Barbara Biedziak
Adv. Sci. Technol. Res. J. 2020; 14(4):250–261
Effectiveness of Diamond Blades in the Turning of Aluminium Composites
Adv. Sci. Technol. Res. J. 2020; 14(4):262–272
Low Temperature Combustion of Jet Propellant-8 Fuel in Compression Ignition Engine with the Low Compression Ratio
Adv. Sci. Technol. Res. J. 2020; 14(4):273–283
Model Research on the Influence of Bearing Preload Change on the Frequency and Form if Natural Vibrations of the Spindle System
Adv. Sci. Technol. Res. J. 2020; 14(4):284–297
Modern Reverse Engineering Methods Used to Modification of Jewelry
Adv. Sci. Technol. Res. J. 2020; 14(4):298–306
Mechanical Properties and Sliding Wear Resistance of Suspension Plasma Sprayed YSZ Coatings
Adv. Sci. Technol. Res. J. 2020; 14(4):307–314
Influence of the Biocidal Agent Layer on Selected Properties of the Blown Polyethylene Film
Adv. Sci. Technol. Res. J. 2020; 14(4):315–325
Most read
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.