PL EN
 
Articles in press
 

Potential and Limits of Overall Equipment Effectiveness in the Total Productivity Management
Ivana Šajdlerová, Vladimíra Schindlerová, Jiří Kratochvíl
DOI: https://doi.org/10.12913/22998624/113617
Stats
Abstract
 

The Effect of Modifier on the Microstructure of the AlSi10CuNiMn Alloy
Jaromir Cais, Jiri Heinrich, Klara Jirounkova
DOI: https://doi.org/10.12913/22998624/113618
Stats
Abstract
 

Mathematical Modeling of Material Erosion During the Electrical Discharge
Zbigniew Gulbinowicz, Olgierd Janusz Goroch, Paweł Skoczylas
DOI: https://doi.org/10.12913/22998624/114959
Stats
Abstract
 

Analysis of the Post-Critical Deformation State of Curvilinear Integral Stiffening of a Thin-Walled Structure Subjected to Torsion
Tomasz Kopecki
DOI: https://doi.org/10.12913/22998624/115814
Stats
Abstract
 

Structural Size Optimization of an External Fixation Device
Nedim Pervan, Elmedin Mešić, Adil Muminović, Mirsad Čolić, Marin Petrović
DOI: https://doi.org/10.12913/22998624/116870
Stats
Abstract
 

Experimental Investigation of Diesel Engine Powered with Fuel Microemulsion
Krzysztof Górski
DOI: https://doi.org/10.12913/22998624/118107
Stats
Abstract
 

Determination of the Value of the Damage Function in 1050A Aluminium Alloy
Patrycja Walczuk-Gągała, Zbigniew Pater, Łukasz Wójcik
DOI: https://doi.org/10.12913/22998624/118105
Stats
Abstract
 

Cavitating Fuel Flows in Hypocycloid Pump from the Perspective of Applying the Effect of Gas Desorption from the Solution with Nucleation of Gas Bubbles
Wojciech Karpiuk
DOI: https://doi.org/10.12913/22998624/118104
Stats
Abstract
 

Visual Effects of Surface Emissivity in Thermal Imaging
Arkadiusz Urzędowski, Dorota Wójcicka-Migasiuk, Barbara Buraczyńska
DOI: https://doi.org/10.12913/22998624/118103
Stats
Abstract
 

Mechanical and Thermal Stresses in an HPDC Machine Plunger During the Dosing and Filling Process
Jacek Jankowski, Dariusz Kołakowski, Boguslaw Pisarek
DOI: https://doi.org/10.12913/22998624/118187
Stats
Abstract
 

Study of the Performance of Natural Fiber Reinforced Composites for Wind Turbine Blade Applications
Temesgen Batu, Hirpa G. Lemu, Belete Sirhabizuh
DOI: https://doi.org/10.12913/22998624/118201
Stats
Abstract
 

The Effects of Hot Deformation Parameters on the Size of Dynamically Recrystallised Austenite Grains of HSLA Steel
Aleksandra Pietraszek, Elżbieta Kalinowska-Ozgowicz, Sebastian Gnapowski, Joanna Szulżyk-Cieplak
DOI: https://doi.org/10.12913/22998624/118255
Stats
Abstract
 

Selection of the Technological Ceramic Layer Thickness in an HPDC Machine Plunger in the Aspect of its Strength
Jacek Jankowski, Dariusz Kolakowski, Bogusław Pisarek
DOI: https://doi.org/10.12913/22998624/118399
Stats
Abstract
 

Bending Moment and Cross-Section Deformation of a Box Profile
Feliks Stachowicz, Stanisław Kut
DOI: https://doi.org/10.12913/22998624/118552
Stats
Abstract
 

Effect of Test Velocity on the Energy Absorption Under Progressive Crushing of Composite Tubes
Grażyna Ryzińska, Roman Gieleta
DOI: https://doi.org/10.12913/22998624/118551
Stats
Abstract
 

Application of X-ray Diffraction for Residual Stress Analysis in Truncated Cones Made by Incremental Forming
Bogdan Krasowski, Andrzej Kubit, Tomasz Trzepieciński, Kazimiera Dudek, Jan Slota
DOI: https://doi.org/10.12913/22998624/118829
Stats
Abstract
 

Indentation Hardness and Tribological Wear in Conditions of Sliding Friction of the Surface Layer of Composites Based on Methacrylate Resins with Ceramic Nanofiller
Daniel Pieniak, Konrad Gauda
DOI: https://doi.org/10.12913/22998624/118867
Stats
Abstract
 

Analysis of Energy Consumption in the Production Chain of Heat from Pellet
Halina Marczak
DOI: https://doi.org/10.12913/22998624/118868
Stats
Abstract
 

Solving the Spatial Relationships in Manufacturing Systems
Naqib Daneshjo, Albert Mareš, Erika Dudáš Pajerská
DOI: https://doi.org/10.12913/22998624/118941
Stats
Abstract
 

Concrete Capillarity under Different Curing Conditions Produced in Kurdistan-Iraq
Bengin Herki
DOI: https://doi.org/10.12913/22998624/118942
Stats
Abstract
 

Machining of Composite Materials by Ultrasonic Assistance
Marcel Kuruc
DOI: https://doi.org/10.12913/22998624/118943
Stats
Abstract
 

The Effect of Sintering Time on Wear Resistance of Silicon Nitride
Zuzana Gábrišová, Alena Brusilová, Pavol Švec
DOI: https://doi.org/10.12913/22998624/118944
Stats
Abstract
 

Stress Concentration Analysis of the Injection Pump Shaft
Paweł Bałon, Andrzej Świątoniowski, Edward Rejman, Bartłomiej Kiełbasa, Robert Smusz, Janusz Szostak, Łukasz Kowalski
DOI: https://doi.org/10.12913/22998624/118945
Stats
Abstract
 

Impact of Assembly Method on the Strength of Single-Lap Joints of Aircraft Aluminum Alloy Sheets
Izabela Miturska
DOI: https://doi.org/10.12913/22998624/119046
Stats
Abstract
 

A Computational Algorithm for Path Interval Determination in Multi-Axis Filleted End Milling
Tsutomu Sekine
DOI: https://doi.org/10.12913/22998624/119047
Stats
Abstract
 

Prediction of Surface Roughness based on the Machining Conditions with the Effect of Machining Stability
Yung-Chih Lin, You-Chen Chen, Kung-Da Wu, Jui-Pin Hung
DOI: https://doi.org/10.12913/22998624/119048
Stats
Abstract
 

Pallet Fixing Lock, Determination of Shear Resistance and Spring Stiffness
Leopold Hrabovský, Vieroslav Molnár, Gustav Kotajný, Jozef Kuľka
Stats
Abstract
 

Selected Issues on the Operation of the Internal Combustion Engine Turbocharger
Wincenty Lotko, Marcin Lechowski
Stats
Abstract
 
Most read
Indexes
 
Keywords index
Authors index
Copyright © 2006-2020 Bentus All rights reserved.