All issues
Volume 13, Issue 4, 2019
Numerical Analysis of the Influence of Particular Parts of the High Efficient Electric Vehicle on the Aerodynamic Forces
Adv. Sci. Technol. Res. J. 2019; 13(4):1–7
Wear Characteristics of Hardfacing Coatings Obtained by Tungsten Inert Gas Method
Adv. Sci. Technol. Res. J. 2019; 13(4):8–14
Creating the Structure and Properties of 7075 Alloy Casts by Thermal and Forming Processes
Adv. Sci. Technol. Res. J. 2019; 13(4):15–21
Analysis of the Influence of Support During Measurement Using Coordinate Measuring Techniques
Adv. Sci. Technol. Res. J. 2019; 13(4):22–29
Application of Fourier Series for Evaluation of Roundness Profiles in Metrology
Adv. Sci. Technol. Res. J. 2019; 13(4):30–38
Prototyping of an Individualized Multi-Material Wrist Orthosis using Fused Deposition Modelling
Adv. Sci. Technol. Res. J. 2019; 13(4):39–47
Identifying Optimal FSW Process Parameters for 2024 Al Alloy Butt Joints
Adv. Sci. Technol. Res. J. 2019; 13(4):48–53
Optimal Mass Diffusion Transfer in Solids Using Heat Transfer Similarities
Adv. Sci. Technol. Res. J. 2019; 13(4):54–59
Designing and Modeling of Control Strategies Based on Multi-Objective Optimization for a Permanent-Magnet Synchronous Generator Wind Turbine: A Study Based on the Grid Errors and Wind Speed
Adv. Sci. Technol. Res. J. 2019; 13(4):60–69
Soft-Sensing in Batch Annealing Based on Finite Differential Method and Support Vector Regression
Adv. Sci. Technol. Res. J. 2019; 13(4):70–86
Strength of Joints with “Hi-Lok” Fasteners in Aircraft Safety Considerations
Adv. Sci. Technol. Res. J. 2019; 13(4):87–93
Assessment of Influence of Sample Averaging on Accuracy of Point Coordinates Measurement Performed Using Laser Tracking Systems
Adv. Sci. Technol. Res. J. 2019; 13(4):94–99
Analysis of Fly Ash Concrete with Scanning Electron Microscopy and X-Ray Diffraction
Adv. Sci. Technol. Res. J. 2019; 13(4):100–110
Analysis of Hard Facing Material Designed for Application on the Forestry Tools
Adv. Sci. Technol. Res. J. 2019; 13(4):111–119
Methodology of Low Cost Rapid Manufacturing of Anatomical Models with Material Imitation of Soft Tissues
Adv. Sci. Technol. Res. J. 2019; 13(4):120–128
Proposal of Conversion the Tugboat Engines to Diesel - LNG Operation
Adv. Sci. Technol. Res. J. 2019; 13(4):129–142
Recognition Characteristics of Interface Designed for Gesture Operations of 3D Objects
Adv. Sci. Technol. Res. J. 2019; 13(4):143–150
Abrasion Resistance of S235, S355, C45, AISI 304 and Hardox 500 Steels with Usage of Garnet, Corundum and Carborundum Abrasives
Adv. Sci. Technol. Res. J. 2019; 13(4):151–161
Traffic Modelling of the Circular Junction in the City of Žilina
Adv. Sci. Technol. Res. J. 2019; 13(4):162–169
Convergence Analysis of Finite Element Approach to Classical Approach for Analysis of Plates in Bending
Adv. Sci. Technol. Res. J. 2019; 13(4):170–180
Forces Generated in the Parking Brake of the Pallet Locking System
Adv. Sci. Technol. Res. J. 2019; 13(4):181–187
Use of One and Two Horizontal Plates to Reduce the Drag Force on the Rigid Cylinder Located Inside the Channel: Approach of the Immersed Interface Method
Adv. Sci. Technol. Res. J. 2019; 13(4):188–193
Robust Diagnosis of a Proton Exchange Membrane Fuel Cell Using Bond Graph Methodlogy – Physical and Electrical Faults Detection and Isolation
Adv. Sci. Technol. Res. J. 2019; 13(4):194–203
The Effect of Ageing on Selected Properties of Polylactide Modified with Blowing Agents
Adv. Sci. Technol. Res. J. 2019; 13(4):204–213
An Energy Analysis of Impact Strength Tests Using Pendulum Hammers
Adv. Sci. Technol. Res. J. 2019; 13(4):214–222
New Polymer Composites Including a Phenol-Formaldehyde Resin Binder Designed for Self-Lubricating Sliding Pair Elements
Adv. Sci. Technol. Res. J. 2019; 13(4):223–229
Modelling Noise Exposure by Means of Infrared Technology
Adv. Sci. Technol. Res. J. 2019; 13(4):230–238
Wear Assessment of Sliding Sleeves in a Single-Stage Cycloidal Drive
Adv. Sci. Technol. Res. J. 2019; 13(4):239–245
Thermoforming of a Polystyrene Sheet with a Vibrating Male Mold
Adv. Sci. Technol. Res. J. 2019; 13(4):246–254
Photorealistic 3D Digital Reconstruction of a Clay Pitcher
Adv. Sci. Technol. Res. J. 2019; 13(4):255–263
Effect of Nature and Amount of Polypropylene Composite Filler on the Productivity of Extruder with the Cylinder Equipped with Grooves
Adv. Sci. Technol. Res. J. 2019; 13(4):264–269
An Optimization Study for Bridge Design of a Porthole Extrusion Die
Adv. Sci. Technol. Res. J. 2019; 13(4):270–275
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.