PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publishers
Article Processing Charge
Open Access
All issues
Volume 14, Issue 1, 2020
 
 

Analysis of the Possibilities of Improving the Selected Properties Surface Layer of Butt Joints Made Using the FSW Method
Magdalena Bucior, Rafał Kluz, Andrzej Kubit, Kamil Ochał
Adv. Sci. Technol. Res. J. 2020; 14(1):1–9
DOI: https://doi.org/10.12913/22998624/111662
 
Stats
Abstract
Article (PDF)
 

Strength of Assembly Butt Joints of Plastic Pipes
Izabela Miturska, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):10–17
DOI: https://doi.org/10.12913/22998624/113544
 
Stats
Abstract
Article (PDF)
 

Influence of Semi-Active Suspension Characteristics on the Driving Comfort
Robertas Pečeliūnas
Adv. Sci. Technol. Res. J. 2020; 14(1):18–25
DOI: https://doi.org/10.12913/22998624/113282
 
Stats
Abstract
Article (PDF)
 

The Use of a Plate Conveyor for Transporting Aluminum Cans in the Food Industry
Iwona Katarzyna Rybicka, Jacek Caban
Adv. Sci. Technol. Res. J. 2020; 14(1):26–31
DOI: https://doi.org/10.12913/22998624/113283
 
Stats
Abstract
Article (PDF)
 

The Substantiation of the Optimal Parameters for Dough Pinning-Out Rollers
Tetiana Vitenko, Igor Stadnik, Paweł Droździel, Anna Rudawska
Adv. Sci. Technol. Res. J. 2020; 14(1):32–41
DOI: https://doi.org/10.12913/22998624/113611
 
Stats
Abstract
Article (PDF)
 

Rapid Manufacturing of Individualized Prosthetic Sockets
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Magdalena Żukowska, Ewa Suszek
Adv. Sci. Technol. Res. J. 2020; 14(1):42–49
DOI: https://doi.org/10.12913/22998624/113425
 
Stats
Abstract
Article (PDF)
 

Proposal of a Mechanism for Car Seat Movement
Vladimír Pavelčík, Dalibor Barta, Milan Sapieta
Adv. Sci. Technol. Res. J. 2020; 14(1):50–57
DOI: https://doi.org/10.12913/22998624/113286
 
Stats
Abstract
Article (PDF)
 

The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film
Anna Rudawska, Dana Stančeková, Mirosław Müller, Tatiana Vitenko, Vlodymyr Iasnii
Adv. Sci. Technol. Res. J. 2020; 14(1):58–68
DOI: https://doi.org/10.12913/22998624/113612
 
Stats
Abstract
Article (PDF)
 

Realization and Verification of Data Conversion from Laser Scanner to FEM
Alžbeta Sapietová, Ondrej Štalmach, Milan Sága, Dana Stančeková, Lukáš Gajdoš
Adv. Sci. Technol. Res. J. 2020; 14(1):69–74
DOI: https://doi.org/10.12913/22998624/113285
 
Stats
Abstract
Article (PDF)
 

The Effect of Artificial Ageing on the Mechanical Properties of the EN AW 2017 Alloy
Klara Jirounkova, Jan Vozka, Jaromir Cais
Adv. Sci. Technol. Res. J. 2020; 14(1):75–80
DOI: https://doi.org/10.12913/22998624/113614
 
Stats
Abstract
Article (PDF)
 

Use of the Dynamic Simulation to Reduce Handling Complexity in the Manufacturing Process
Vladimíra Schindlerová, Ivana Šajdlerová
Adv. Sci. Technol. Res. J. 2020; 14(1):81–88
DOI: https://doi.org/10.12913/22998624/113616
 
Stats
Abstract
Article (PDF)
 

Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy
Jana Petrů, Lukáš Drábek, Jiří Hajnyš, Dalibor Jurok, Marek Pagáč, Jakub Měsíček
Adv. Sci. Technol. Res. J. 2020; 14(1):89–95
DOI: https://doi.org/10.12913/22998624/113615
 
Stats
Abstract
Article (PDF)
 

Design of the Optimal Geometry of the Moulded Piece Based on Numerical Analyses in Cadmould 3D-F
Paweł Mańko, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2020; 14(1):96–106
DOI: https://doi.org/10.12913/22998624/114961
 
Stats
Abstract
Article (PDF)
 

The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
Elżbieta Doluk, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):107–115
DOI: https://doi.org/10.12913/22998624/116549
 
Stats
Abstract
Article (PDF)
 

Vertical Forces Acting on the Lock-Off Element of the Pallet Brake System
Leopold Hrabovský, Tomáš Mlčák
Adv. Sci. Technol. Res. J. 2020; 14(1):116–126
DOI: https://doi.org/10.12913/22998624/113607
 
Stats
Abstract
Article (PDF)
 

Numerical Modeling of Superplastic Punchless Deep Drawing Process of a Ti-6Al-4V Titanium Alloy
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2020; 14(1):127–136
DOI: https://doi.org/10.12913/22998624/114029
 
Stats
Abstract
Article (PDF)
 

Development of Ammunition with Unconventional Applications
Olgierd Janusz Goroch, Gulbinowicz Zbigniew, Cybula Leszek
Adv. Sci. Technol. Res. J. 2020; 14(1):137–144
DOI: https://doi.org/10.12913/22998624/115515
 
Stats
Abstract
Article (PDF)
 

Numerical Analysis of the Cross-Wedge of a Hollow Rail Axle
Zbigniew Pater, Konrad Lis, Patrycja Walczuk-Gągała
Adv. Sci. Technol. Res. J. 2020; 14(1):145–153
DOI: https://doi.org/10.12913/22998624/115513
 
Stats
Abstract
Article (PDF)
 

On the Identification of Local Structural Defects in Composite Thin-Walled Structures
Henryk Kopecki, Łukasz Piotr Święch, Radosław Kołodziejczyk
Adv. Sci. Technol. Res. J. 2020; 14(1):154–166
DOI: https://doi.org/10.12913/22998624/115812
 
Stats
Abstract
Article (PDF)
 

Highly Efficient Milling on the Example of Selected Machining Strategies
Kazimierz Zaleski, Jakub Matuszak, Andrzej Zyśko
Adv. Sci. Technol. Res. J. 2020; 14(1):167–177
DOI: https://doi.org/10.12913/22998624/116356
 
Stats
Abstract
Article (PDF)
 

Diagnostics of Transient States in Hydraulic Pump System with Short Time Fourier Transform
Krzysztof Przystupa, Bartłomiej Ambrożkiewicz, Grzegorz Litak
Adv. Sci. Technol. Res. J. 2020; 14(1):178–183
DOI: https://doi.org/10.12913/22998624/116971
 
Stats
Abstract
Article (PDF)
 

Evaluation of Material Data to the Numerical Strain-Life Analysis of the Compressor Blade Subjected to Resonance Vibrations
Arkadiusz Stefan Bednarz
Adv. Sci. Technol. Res. J. 2020; 14(1):184–190
DOI: https://doi.org/10.12913/22998624/117115
 
Stats
Abstract
Article (PDF)
 

Analysis of Linkage Mechanisms with Internal Driving Link
Mykhaylo Pashechko, Viacheslav Pasika, Nataliya Hembara, Viacheslav Kharzhevskyi
Adv. Sci. Technol. Res. J. 2020; 14(1):191–200
DOI: https://doi.org/10.12913/22998624/117426
 
Stats
Abstract
Article (PDF)
 

Numerical Analysis of a Six Stage Forging Process for Producing Hollow Flanged Parts from Tubular Blanks
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2020; 14(1):201–208
DOI: https://doi.org/10.12913/22998624/116748
 
Stats
Abstract
Article (PDF)
 

Analysis of Mechanical and Thermal Stresses in a Pressure Casting Machine Plunger
Jacek Jankowski, Dariusz Kołakowski, Bogusław Pisarek
Adv. Sci. Technol. Res. J. 2020; 14(1):209–223
DOI: https://doi.org/10.12913/22998624/117724
 
Stats
Abstract
Article (PDF)
 
Most read
Indexes
 
Keywords index
Authors index
Copyright © 2006-2021 Bentus All rights reserved.