PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
vol. 13, 4, 2019
Statystyki
CC-BY 4.0
Pobierz cytowanie
Wear Assessment of Sliding Sleeves in a Single-Stage Cycloidal Drive
Wojciech Żurowski 1
,
 
Krzysztof Olejarczyk 1
,
 
Renata Zaręba 1
 
 
 
Więcej
Ukryj
1
Kazimierz Pulaski University of Technology and Humanities in Radom, Stasieckiego 54 Street, 26-600 Radom, Poland
 
 
Data publikacji: 01-12-2019
 
 
Autor do korespondencji
Renata Zaręba   

Kazimierz Pulaski University of Technology and Humanities in Radom, Stasieckiego 54 Street, 26-600 Radom, Poland
 
 
Adv. Sci. Technol. Res. J. 2019; 13(4):239-245
DOI: https://doi.org/10.12913/22998624/114180
 
 
Artykuł (PDF)
 
SŁOWA KLUCZOWE
wear
single-stage cycloidal drive
sliding sleeves
synthetic oil
 
DZIEDZINY
 
STRESZCZENIE
In the paper, the issue of sliding sleeves wear in a cycloidal transmission is addressed. The working model of a cycloidal drive was constructed and tested in the special rig, and its sleeves underwent detailed analysis afterwards. The sleeves were produced by sintering technique out of Selfoil bronze with self-lubricating properties. In particular, their surface appearance, weight loss and dimensional changes were assessed, as well as the chemical content of the gearbox oil was analyzed. The differences in the sleeves wear were pointed out, related to their positions in the transmission.
Udostępnij
Wyślij mailem
ARTYKUŁ POWIĄZANY
Assessment of the Conveyor Belt Strength Decrease due to the Long Term Exploitation in Harmful Conditions
Modification of Microstructure and Surface Properties of Ti-6Al-4V Alloy by MoSi2 Particles Using Micro-Arc Oxidation Process
The Impact of a Movement Type on Tribological Properties of AlTiN Coating Deposited on HS6-5-2C Steel
Empirical Study on the Effect of Tungsten Carbide Grain Size on Wear Resistance, Cutting Temperature, Cutting Forces and Surface Finish in the Milling Process of 316L Stainless Steel
Tribology Characteristics of Heatproof Alloys at a Dynamic Pin Ladening in the Variable Temperature Field
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top