PL EN
Thermoforming of a Polystyrene Sheet with a Vibrating Male Mold
 
Więcej
Ukryj
1
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, Nadbystrzycka 36 Str., 20-618 Lublin, Poland
 
2
Lublin University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Mechatronic, Nadbystrzycka 36 Str., 20-618 Lublin, Poland
 
 
Data publikacji: 01-12-2019
 
 
Autor do korespondencji
Emil Sasimowski   

Lublin University of Technology, Faculty of Mechanical Engineering, Department of Polymer Processing, Nadbystrzycka 36 Str., 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2019; 13(4):246-254
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The study’s objective was to present the results of research on the thermoforming process using a patented, original male mold vibrating with the adequate frequency during the stretching of a polystyrene sheet. The research included determining the influence of frequency of the mold’s vibration as well as other selected conditions of the thermoforming process, such as temperature of the heater and heating time on the irregularity of the wall thickness of the formed product. The research was conducted using the DOE methods – central composite design. Thermoforming process was conducted using the vacuum stretching method with initial forming by high-pressure air. The analysis of the results obtained showed that the frequency of mold’s vibration has a significant statistic influence on the thickness of the finished product’s walls both in the area of their bottom as well as the bottom’s edge. The thickness of the product’s wall on these areas is also significantly influenced by the other above-mentioned factors. No interaction, however, was detected between those and the frequency of the mold’s vibration. Using the vibrating mold in the presented process proved favourable, since the walls of the obtained finished products showed less irregularity in terms of wall thickness than the products manufactured using a fixed mold.
Journals System - logo
Scroll to top