Topic Manufacturing techniques
Specification of the Application of Vibrodiagnostics in Assessing the State of the Industrial Robot
Adv. Sci. Technol. Res. J. 2019; 13(1):68–78
Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Adv. Sci. Technol. Res. J. 2019; 13(1):29–36
Statistical Analyses of Selected Maintenance Parameters of Vehicles of Road Transport Companies
Jacek Caban, Paweł Droździel, Leszek Krzywonos, Iwona Katarzyna Rybicka, Branislav Šarkan, Ján Vrábel
Adv. Sci. Technol. Res. J. 2019; 13(1):1–13
Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Adv. Sci. Technol. Res. J. 2018; 12(4):207–215
Effective Solutions to the Transport Distribution of Material by the Mayer Method
Adv. Sci. Technol. Res. J. 2018; 12(4):177–183
Designing and Upgrading the Assembly Process and Verifying the Performance of the Pick to Light System Program
Adv. Sci. Technol. Res. J. 2018; 12(4):126–135
INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Adv. Sci. Technol. Res. J. 2018; 12(3):242–249
RESEARCH OF POLYMERIC EXTRUDATE WITH SEGMENT-WALL CONSTRUCTION
Adv. Sci. Technol. Res. J. 2018; 12(3):216–222
NUMERICAL ANALYSIS OF A FORGING PROCESS FOR PRODUCING A HOLLOW BALL FROM TUBE
Adv. Sci. Technol. Res. J. 2018; 12(3):150–157
THERMOVISUAL MEASUREMENTS OF 3D PRINTING OF ABS AND PLA FILAMENTS
Adv. Sci. Technol. Res. J. 2018; 12(3):266–271
PROPOSAL OF CONTENT MAINTENANCE OF CNC MACHINE USING METHODS RELIABILITY CENTERED MAINTENANCE
Adv. Sci. Technol. Res. J. 2018; 12(3):126–133
EFFECTS OF FORMING TOOLS AND PROCESS PARAMETERS ON SURFACE ROUGHNESS IN INCREMENTAL SHEET FORMING, A REVIEW
Adv. Sci. Technol. Res. J. 2018; 12(3):75–95
RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Adv. Sci. Technol. Res. J. 2018; 12(2):274–290
APPLICATION OF SUPPLY CHAIN MANAGEMENT IN CONSTRUCTION INDUSTRY
Adv. Sci. Technol. Res. J. 2018; 12(2):11–19
INCREASING EFFICIENCY OF FLEXIBLE MANUFACTURING SYSTEMS BASED ON COMPUTER PRODUCT GROUPING
Adv. Sci. Technol. Res. J. 2018; 12(2):6–10
EFFECT OF TECHNOLOGICAL PARAMETERS ON THE SURFACE ROUGHNESS OF ALUMINIUM ALLOYS AFTER TURNING
Adv. Sci. Technol. Res. J. 2018; 12(2):144–149
USE OF THE FINITE ELEMENT METHOD TO DESIGN THE PROPERTIES OF SHAPED JOINTS MADE OF COMPOSITE MATERIALS
Adv. Sci. Technol. Res. J. 2018; 12(2):59–64
THE EFFECT OF RFSSW PARAMETERS ON THE LOAD BEARING CAPACITY OF ALUMINUM 7075-T6 SHEET METAL JOINTS
Adv. Sci. Technol. Res. J. 2018; 12(2):35–41
Assessment of the Manufacturing Possibility of Thin-Walled Robotic Portals for Conveyor Worklace
Adv. Sci. Technol. Res. J. 2018; 12(1):338–345
Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625
Adv. Sci. Technol. Res. J. 2018; 12(1):236–243
Operational Properties of Anti-graffiti Coating Systems for Rolling Stock
Adv. Sci. Technol. Res. J. 2018; 12(1):127–134
A Comparative Study of Face Milling of D2 Steel Using Al2O3 Based Nanofluid Minimum Quantity Lubrication and Minimum Quantity Lubrication
Adv. Sci. Technol. Res. J. 2018; 12(1):99–105
State of Residual Stresses After the Process of Milling Selected Aluminium Alloys
Adv. Sci. Technol. Res. J. 2018; 12(1):63–73
Analysis of the Effect of Wire Electric Dischage Machining Process Parameters for the Formation of High Speed Steel Form Tool
Adv. Sci. Technol. Res. J. 2018; 12(1):89–98
Influence of Sterilization of a Product Manufactured Using FDM Technology on its Dimensional Accuracy
Adv. Sci. Technol. Res. J. 2018; 12(1):74–79
Numerical Simulation of Forming Titanium Thin-wall Panels with Stiffeners
Adv. Sci. Technol. Res. J. 2018; 12(1):54–62
The Effect of Plunge Depth on the Strength Properties of Friction Welded Joints Using the RFSSW Method
Adv. Sci. Technol. Res. J. 2018; 12(1):41–47
Effect of Tool Eccentricity on Microstructure and Properties of FSW Joints Made of Al 7075 T6 Alloy
Adv. Sci. Technol. Res. J. 2017; 11(4):333–338
Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
Adv. Sci. Technol. Res. J. 2017; 11(4):286–293
Tribological Properties of Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions Determined in the Tests Conducted in Engine Fuel Atmosphere
Adv. Sci. Technol. Res. J. 2017; 11(4):215–219
Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76–82
Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Adv. Sci. Technol. Res. J. 2017; 11(4):279–285
The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Adv. Sci. Technol. Res. J. 2017; 11(4):260–269
Fretting Wear Analysis of Different Tube Materials Used in Heat Exchanger Tube Bundle
Adv. Sci. Technol. Res. J. 2017; 11(4):123–133
The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Adv. Sci. Technol. Res. J. 2017; 11(4):198–205
Stone Dust Agglomeration for Utilizing as Building Material
Adv. Sci. Technol. Res. J. 2017; 11(4):168–174
Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Adv. Sci. Technol. Res. J. 2017; 11(4):159–167
Electrochemical Grinding of Titanium-Containing Materials
Adv. Sci. Technol. Res. J. 2017; 11(4):183–188
Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Adv. Sci. Technol. Res. J. 2017; 11(4):83–96
Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Adv. Sci. Technol. Res. J. 2017; 11(4):111–122
Investigation of the Effect of Forging Temperature on the Microstructure of Grade 5 Titanium ELI
Adv. Sci. Technol. Res. J. 2017; 11(4):147–158
Influence of Machining Strategies and Technological History of Semi-Finished Product on the Deformation of Thin-Wall Elements After Milling
Adv. Sci. Technol. Res. J. 2017; 11(3):289–296
Analysis of Structure and Shear/Peel Strength of Refill Friction Stir Spot Welded 7075-T6 Aluminium Alloy Joints
Adv. Sci. Technol. Res. J. 2017; 11(3):297–303
Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Adv. Sci. Technol. Res. J. 2017; 11(3):204–210
An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Adv. Sci. Technol. Res. J. 2017; 11(3):223–232
Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies
Adv. Sci. Technol. Res. J. 2017; 11(3):283–288
The Use of Lean Manufacturing Techniques – SMED Analysis to Optimization of the Production Process
Adv. Sci. Technol. Res. J. 2017; 11(3):187–195
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.