PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access
Keyword microstructure
 

Characterization of the Structural and Physical Properties of the Thermoplastic Starch Film with Kaolinite and Beeswax Addition
Karolina Julia Beer-Lech, Anna Skic, Kamil Skic, Zbigniew Stropek
Adv. Sci. Technol. Res. J. 2022; 16(5):312–323
DOI: https://doi.org/10.12913/22998624/155188
 

An Elastic-Plastic Analysis of Polycrystalline Structure Using Crystal Plasticity Modelling – Theory and Benchmark Tests
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2022; 16(5):163–177
DOI: https://doi.org/10.12913/22998624/154025
 

Structure and Properties of the S49 Rail after a Long Term Outdoor Exposure
Jarosław Konieczny, Krzysztof Labisz
Adv. Sci. Technol. Res. J. 2022; 16(2):280–290
DOI: https://doi.org/10.12913/22998624/147275
 

Effect of Plastic Deformation on CCT-Diagram of Multi-Phase Forging Steel
Anna Wojtacha, Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(4):72–80
DOI: https://doi.org/10.12913/22998624/142473
 

Advances in Surface Engineering Using TIG Processing to Incorporate Ceramic Particulates into Low Alloy and Microalloyed Steels – A Review
Patricia Munoz-Escalona, Shahjahan Mridha, Thomas Neville Baker
Adv. Sci. Technol. Res. J. 2021; 15(3):88–98
DOI: https://doi.org/10.12913/22998624/138467
 

Comparative Analysis of Mechanical Properties of WC-based Cermet Coatings Sprayed by HVOF onto AZ31 Magnesium Alloy Substrates
Ewa Jonda, Leszek Łatka
Adv. Sci. Technol. Res. J. 2021; 15(2):57–64
DOI: https://doi.org/10.12913/22998624/135979
 

Mechanical Properties and Sliding Wear Resistance of Suspension Plasma Sprayed YSZ Coatings
Leszek Łatka, Mirosław Szala, Wojciech Macek, Ricardo Branco
Adv. Sci. Technol. Res. J. 2020; 14(4):307–314
DOI: https://doi.org/10.12913/22998624/128574
 

Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Zuzana Gábrišová, Pavol Švec, Alena Brusilová
Adv. Sci. Technol. Res. J. 2020; 14(4):156–167
DOI: https://doi.org/10.12913/22998624/127355
 

The Effect of Sintering Time on Wear Resistance of Silicon Nitride
Zuzana Gábrišová, Alena Brusilová, Pavol Švec
Adv. Sci. Technol. Res. J. 2020; 14(2):145–154
DOI: https://doi.org/10.12913/22998624/118944
 

The Effect of Modifier on the Microstructure of the AlSi10CuNiMn Alloy
Jaromir Cais, Jiri Heinrich, Klara Jirounkova
Adv. Sci. Technol. Res. J. 2020; 14(2):13–18
DOI: https://doi.org/10.12913/22998624/113618
 

Creating the Structure and Properties of 7075 Alloy Casts by Thermal and Forming Processes
Krzysztof Majerski, Anna Dziubińska, Grzegorz Winiarski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2019; 13(4):15–21
DOI: https://doi.org/10.12913/22998624/112361
 

Effect of Natural Aging and Fatigue Crack Propagation Rate on Welded and Non-Welded Aluminum Alloy (AA2219˗T87)
Mudasir Ijaz, Faisal Qayyum, Hassan Elahi, Mudaser Ullah, Marco Eugeni, Saeed Badshah, Paolo Gaudenzi
Adv. Sci. Technol. Res. J. 2019; 13(3):129–143
DOI: https://doi.org/10.12913/22998624/110737
 

MODIFICATIONS AlSi7Mg0.3 ALLOYS TROUGH Ca, Sr AND Sb
Jaromír Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2018; 12(2):180–187
DOI: https://doi.org/10.12913/22998624/91886
 

The Influence of Microstructure of Arc Sprayed Coatings on Wear Resistance
Daniel Tomasz Majewski, Tadeusz Hejwowski, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2018; 12(1):285–292
DOI: https://doi.org/10.12913/22998624/86210
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76–82
DOI: https://doi.org/10.12913/22998624/80901
 

Investigation of the Effect of Forging Temperature on the Microstructure of Grade 5 Titanium ELI
Anna Dziubińska, Krzysztof Majerski, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2017; 11(4):147–158
DOI: https://doi.org/10.12913/22998624/76488
 

Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Andrzej Maruszczyk, Agata Dudek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2017; 11(3):204–210
DOI: https://doi.org/10.12913/22998624/76450
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159–165
DOI: https://doi.org/10.12913/22998624/69680
 

INFLUENCE OF THE HOMOGENIZATION TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF AlSi10CuNiMgMn ALLOY
Jaromir Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2017; 11(1):104–110
DOI: https://doi.org/10.12913/22998624/66503
 

THE ROLE OF SHIELDING GAS ON MECHANICAL, METALLURGICAL AND CORROSION PROPERTIES OF CORTEN STEEL WELDED JOINTS OF RAILWAY COACHES USING GMAW
Byju John, Sathiya Paulraj, Jolly Mathew
Adv. Sci. Technol. Res. J. 2016; 10(32):156–168
DOI: https://doi.org/10.12913/22998624/65119
 

Investigating the Effect of Hybrid Process: MPF/SPIF on the Microstructure and Mechanical Properties of Brass (65-35) Sheet
Aqeel Sabree Bedan, Samer Jasim Algodi, Emad Ali Hussain
Adv. Sci. Technol. Res. J. 2023; 17(3):302–308
DOI: https://doi.org/10.12913/22998624/167409
 

Effect of Annealing Treatment on (Mg17Al12) Phase Characterization and Corrosion Behavior in Different Solutions for AZ91 Alloy
Marwa H. Abass, Makarim H. Abdulkareem, Hussien A. Hussein
Adv. Sci. Technol. Res. J. 2023; 17(2):330–341
DOI: https://doi.org/10.12913/22998624/161831
 

Effect of Volume Percentage of Reinforcement on the Microstructure and Mechanical Properties of an Al6061-T6/SiC Surface Composite Fabricated Through Friction Stir Processing
Abdul Jabbar Ansari, Mohd. Anas
Adv. Sci. Technol. Res. J. 2023; 17(2):247–257
DOI: https://doi.org/10.12913/22998624/161690
 

Investigations on the Microstructure and Corrosion Performance of Different WC-Based Cermet Coatings Deposited by High Velocity Oxy Fuel Process onto Magnesium Alloy Substrate
Ewa Jonda, Leszek Łatka, Artur Maciej, Alexandr Khozhanov
Adv. Sci. Technol. Res. J. 2023; 17(2):25–35
DOI: https://doi.org/10.12913/22998624/160513
 

Combined Effect of CrB2 Micropowder and VN Nanopowder on the Strength and Wear Re-sistance of Fe‒Cu–Ni–Sn Matrix Diamond Composites
Boranbay Ratov, Volodymyr Mechnik, Miroslaw Rucki, Edwin Gevorkyan, Arturas Kilikevicius, Vasyl Kolodnitskyi, Zbigniew Siemiatkowski, Gulzada Umirova, Leszek Chalko, Jerzy Jozwik, Arailym Zhanggirkhanova, Volodymyr Chishkala, Dmytro Korostyshevskyi
Adv. Sci. Technol. Res. J. 2023; 17(1):23–24
DOI: https://doi.org/10.12913/22998624/157394
 

Microstructure and Hardness of Cold Forged 42CrMo4 Steel Hollow Component with the Outer Flange
Mirosław Szala, Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(4):201–210
DOI: https://doi.org/10.12913/22998624/152790
 

Microstructure and Properties of Dissimilar Joints of AISI 430 Steel with Inconel 625 Obtained by Electron Beam Welding
Małgorzata Dziekońska, Ewa Jonda, Marek Sroka, Marek Węglowski, Tymoteusz Jung
Adv. Sci. Technol. Res. J. 2022; 16(4):232–242
DOI: https://doi.org/10.12913/22998624/152529
 

Thermodynamic Analysis of Precipitation Process of Complex Carbonitride TixV1-xCyN1-y in HSLA-Type Steel
Marek Opiela, Anna Wojtacha
Adv. Sci. Technol. Res. J. 2022; 16(4):64–73
DOI: https://doi.org/10.12913/22998624/151634
 
Most read
Indexes
 
Keywords index
Authors index
© 2006-2023 Journal hosting platform by Bentus