PL EN
 
PL EN
Current issue
About the Journal
Scientific Board
Editorial Office and Publisher
Article Processing Charge
Open Access

All issues
Volume 11, Issue 4, 2017
 
 

Well-Being Approach of a Power System Containing Run-of the-River Power Plants
Esmail Khalilzadeh, Mahmud Fotuhi-Firuzabad, Mehdi Ehsan
Adv. Sci. Technol. Res. J. 2017; 11(4):1-10
DOI: https://doi.org/10.12913/22998624/76698
 

Effect of Ringer's Solution on Tensile Strength of Non-Absorbable, Medium- and Long-Term Absorbable Sutures
Robert Karpiński, Jakub Szabelski, Jacek Maksymiuk
Adv. Sci. Technol. Res. J. 2017; 11(4):11-20
DOI: https://doi.org/10.12913/22998624/76084
 

Information Support of Optimal Control of Modes of Electric Systems with Renewable Energy Sources
Michalina Gryniewicz-Jaworska, Volodymyr V. Kulyk, Iryna A. Bartetska, Olga A. Buslavets
Adv. Sci. Technol. Res. J. 2017; 11(4):21-26
DOI: https://doi.org/10.12913/22998624/75888
 

Energy Intensity of the Electric Vehicle
Mieczysław Dziubiński, Artur Drozd, Marek Adamiec, Ewa Siemionek
Adv. Sci. Technol. Res. J. 2017; 11(4):27-34
DOI: https://doi.org/10.12913/22998624/78516
 

Assessment of the Resistance to External Factors of Low-Density Polyethylene Modified with Natural Fillers
Karolina Głogowska, Łukasz Majewski, Ivan Gajdoš, Gerhard Mitaľ
Adv. Sci. Technol. Res. J. 2017; 11(4):35-40
DOI: https://doi.org/10.12913/22998624/75984
 

The Effect of Selected Conditions in a Thermoforming Process on Wall Thickness Variations
Emil Sasimowski
Adv. Sci. Technol. Res. J. 2017; 11(4):41-48
DOI: https://doi.org/10.12913/22998624/73818
 

Peg-on-Hole: Fundamental Principles of Motion of a Peg Leaning on a Horizontal Hole Edge
Dmitry Simakov, Ludmila Chernyakhovskaya
Adv. Sci. Technol. Res. J. 2017; 11(4):49-59
DOI: https://doi.org/10.12913/22998624/77036
 

Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft
Łukasz Wójcik, Zbigniew Pater
Adv. Sci. Technol. Res. J. 2017; 11(4):60-67
DOI: https://doi.org/10.12913/22998624/75966
 

Effect of Incidence Angle Varying from 0 rad to π/2 rad and Intensity of Radio Waves on the Performance of a Silicon Solar Cell
Issa Zerbo, Mamoudou Saria, Martial Zoungrana, Adama Ouedraogo, Dieudonné Joseph Bathiebo
Adv. Sci. Technol. Res. J. 2017; 11(4):68-75
DOI: https://doi.org/10.12913/22998624/80090
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
DOI: https://doi.org/10.12913/22998624/80901
 

Computer Aided Adaptive System Design with Engineering Systematics and Manufacturing
Gurkan Irsel
Adv. Sci. Technol. Res. J. 2017; 11(4):83-96
DOI: https://doi.org/10.12913/22998624/77069
 

Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Izabela Miturska, Anna Rudawska, Piotr Pawlak, Dana Stančeková, Mateusz Chyra
Adv. Sci. Technol. Res. J. 2017; 11(4):97-102
DOI: https://doi.org/10.12913/22998624/78165
 

Measurement of Hydrogen Storage Capacity in Ca72Mg28 Alloy
Tomáš Brestovič, Natália Jasminská, Marián Lázár, Karel Saksl, Ľubica Bednárová, Michaela Šulíková, Mária Čarnogurská
Adv. Sci. Technol. Res. J. 2017; 11(4):103-110
DOI: https://doi.org/10.12913/22998624/80871
 

Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Olgierd Janusz Goroch, Zbigniew Gulbinowicz
Adv. Sci. Technol. Res. J. 2017; 11(4):111-122
DOI: https://doi.org/10.12913/22998624/76857
 

Fretting Wear Analysis of Different Tube Materials Used in Heat Exchanger Tube Bundle
Tasawar Abbas, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman
Adv. Sci. Technol. Res. J. 2017; 11(4):123-133
DOI: https://doi.org/10.12913/22998624/80309
 

Possibilities of Belzona Adhesive Joints Application for Austenitic Steel Used in Ship Constructions
Wojciech Jurczak, Kamil Jurczak
Adv. Sci. Technol. Res. J. 2017; 11(4):134-140
DOI: https://doi.org/10.12913/22998624/80842
 

Increasing of Durability of Cutting Tools
Emil Spišák, Janka Majernikova
Adv. Sci. Technol. Res. J. 2017; 11(4):141-146
DOI: https://doi.org/10.12913/22998624/78168
 

Investigation of the Effect of Forging Temperature on the Microstructure of Grade 5 Titanium ELI
Anna Dziubińska, Krzysztof Majerski, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2017; 11(4):147-158
DOI: https://doi.org/10.12913/22998624/76488
 

Elimination of Thermal Drift in Measuring the Positioning Accuracy of a Three Axis Milling Machine
Tomáš Stejskal, Miroslav Dovica, Peter Demeč, Jozef Svetlik, Viktoria Rajtukova
Adv. Sci. Technol. Res. J. 2017; 11(4):159-167
DOI: https://doi.org/10.12913/22998624/78669
 

Stone Dust Agglomeration for Utilizing as Building Material
Gabriel Borowski, Tomasz Świderski, Małgorzata Ozga
Adv. Sci. Technol. Res. J. 2017; 11(4):168-174
DOI: https://doi.org/10.12913/22998624/79656
 

Optimization of Production Processes Using the Yamazumi Method
Dušan Sabadka, Vieroslav Molnar, Gabriel Fedorko, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2017; 11(4):175-182
DOI: https://doi.org/10.12913/22998624/80921
 

Electrochemical Grinding of Titanium-Containing Materials
Krzysztof Przystupa, Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(4):183-188
DOI: https://doi.org/10.12913/22998624/78167
 

Possibilities of More Efficient Use of Simulation Tools in Enterprise Logistics
Matúš Hegedüš, Gabriel Fedorko, Matúš Beluško, Martina Hlatká, Pavel Fábera, Hana Neradilová
Adv. Sci. Technol. Res. J. 2017; 11(4):189-197
DOI: https://doi.org/10.12913/22998624/80319
 

The Measuring Position Designed to Determine the Metrological Properties of air Gauges
Michał Jakubowicz, Janusz Dereżyński
Adv. Sci. Technol. Res. J. 2017; 11(4):198-205
DOI: https://doi.org/10.12913/22998624/79830
 

Influence of Polylactide Modification with Blowing Agents on Selected Mechanical Properties
Aneta Tor-Świątek, Tomasz Garbacz, Vladimir Sedlarik, Petr Stloukal, Pavel Kucharczyk
Adv. Sci. Technol. Res. J. 2017; 11(4):206-214
DOI: https://doi.org/10.12913/22998624/80850
 

Tribological Properties of Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions Determined in the Tests Conducted in Engine Fuel Atmosphere
Mariusz Kamiński, Piotr Budzyński
Adv. Sci. Technol. Res. J. 2017; 11(4):215-219
DOI: https://doi.org/10.12913/22998624/80924
 

Design and Effectiveness Verification of Sound Reduction Measures in Production Hall
Marek Moravec, Pavol Liptai, Tibor Dzuro, Miroslav Badida
Adv. Sci. Technol. Res. J. 2017; 11(4):220-224
DOI: https://doi.org/10.12913/22998624/80310
 

Wear Analysis of Die Inserts in the Hot Forging Process of a Forked Type Forging Using Reverse Scanning Techniques
Łukasz Dworzak, Marek Robert Hawryluk, Jacek Piotr Ziemba
Adv. Sci. Technol. Res. J. 2017; 11(4):225-238
DOI: https://doi.org/10.12913/22998624/80318
 

Modelling of Conveyor Belt Passage by Driving Drum Using Finite Element Methods
Nikoleta Mikušová, Slavomir Millo
Adv. Sci. Technol. Res. J. 2017; 11(4):239-246
DOI: https://doi.org/10.12913/22998624/80311
 

Identification of Noise Generated by Driving Set of Autogyro Using an Acoustic Camera
Paweł Magryta, Zbigniew Czyż, Krzysztof Skiba
Adv. Sci. Technol. Res. J. 2017; 11(4):247-251
DOI: https://doi.org/10.12913/22998624/80825
 

Verifying the Prediction Result Reliability Using k-ε, Eddy Dissipation, and Discrete Transfer Models Applied on Methane Combustion Using a Prototype Low-Pressure Burner
Stanislav Honus, Václav Pospíšilík, Simona Jursová, Zdeněk Šmída, Vieroslav Molnár, Miroslav Dovica
Adv. Sci. Technol. Res. J. 2017; 11(4):252-259
DOI: https://doi.org/10.12913/22998624/80922
 

The Numerical FEM Model of the Kinematics of the Vibratory Shot Peening Process
Stanisław Bławucki, Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2017; 11(4):260-269
DOI: https://doi.org/10.12913/22998624/80841
 

Utilisation of Kinect Sensors for the Design of a Human-Robot Collaborative Workcell
Darina Kumičáková, Alexander Rengevič, Miroslav Císar, Vladimír Tlach
Adv. Sci. Technol. Res. J. 2017; 11(4):270-278
DOI: https://doi.org/10.12913/22998624/80937
 

Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
DOI: https://doi.org/10.12913/22998624/80848
 

Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625
Tomáš Zlámal, Jiří Hajnyš, Jana Petrů, Ivan Mrkvica
Adv. Sci. Technol. Res. J. 2017; 11(4):286-293
DOI: https://doi.org/10.12913/22998624/80925
 

The Effect of Machining Conditions on the Forces in the Process of Roller Brush Machining
Jakub Matuszak
Adv. Sci. Technol. Res. J. 2017; 11(4):294-300
DOI: https://doi.org/10.12913/22998624/80847
 

Functional Plasma-Deposited Coatings
Mykhaylo Pashechko, Myroslav Kindrachuk, Igor Gumeniuk, Oleksandr Tisov, Volodymyr Zahrebelniy
Adv. Sci. Technol. Res. J. 2017; 11(4):301-304
DOI: https://doi.org/10.12913/22998624/80996
 

Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
Wiktor Harmatys, Adam Gąska, Maciej Gruza, Piotr Gąska, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2017; 11(4):305-310
DOI: https://doi.org/10.12913/22998624/80893
 

Research on Inner Surface of Tubes Hydroformed
Vasile Adrian Ceclan, Sorin Dumitru Grozav, Ivan Kuric
Adv. Sci. Technol. Res. J. 2017; 11(4):311-317
DOI: https://doi.org/10.12913/22998624/80900
 

Properties of Moldings Prepared from LDPE-Pumpkin Seed Hulls Blend
Karolina Głogowska, Janusz Sikora, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2017; 11(4):318-325
DOI: https://doi.org/10.12913/22998624/74654
 

A Tension Equalizer in Lift Carrying Ropes
Leopold Hrabovský, Peter Michalik
Adv. Sci. Technol. Res. J. 2017; 11(4):326-332
DOI: https://doi.org/10.12913/22998624/80936
 

Effect of Tool Eccentricity on Microstructure and Properties of FSW Joints Made of Al 7075 T6 Alloy
Rafał Burek, Dawid Wydrzyński, Jacek Andres, Agata Wrońska
Adv. Sci. Technol. Res. J. 2017; 11(4):333-338
DOI: https://doi.org/10.12913/22998624/80938
 
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top