PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
vol. 12, 3, 2018
Statystyki
CC-BY 4.0
Pobierz cytowanie
THE INFLUENCE OF AUXILARY SUPPLEMENTS ADDED IN THE EXTRUSION PROCESS TO REDUCE THE FRICTION OF A POLYMERIC FOIL
Sebastian Białasz 1
 
 
 
Więcej
Ukryj
1
Lublin University of Technology, Mechanical Engineering Faculty, Poland
 
 
Data publikacji: 01-09-2018
 
 
Autor do korespondencji
Sebastian Białasz   

Lublin University of Technology, Mechanical Engineering Faculty, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2018; 12(3):250-256
DOI: https://doi.org/10.12913/22998624/95178
 
 
Artykuł (PDF)
 
SŁOWA KLUCZOWE
foil
friction
extrusion
 
DZIEDZINY
 
STRESZCZENIE
The publication describes research on supplements that reduce friction in the foil in the case of sliding contacts. The supplements added to the LD-PE polymer material were based on the following blends: erucic acid amide, behenic acid amide, colloidal silica, potassium soap and talc. The work contains information on the types of processing additives and the resulting changes in properties in the surface layer of the product in the form of a foil.
Udostępnij
Wyślij mailem
ARTYKUŁ POWIĄZANY
Screw Extrusion as a Scalable Technology for Manufacturing Carbon Nanotube-Filled Polylactide Composites
The Impact of a Movement Type on Tribological Properties of AlTiN Coating Deposited on HS6-5-2C Steel
Evaluation of Density Fields of Numerical Analysis Output of Solid Carbon Dioxide Extrusion Process
New Methodology for Predicting the Cracking Phenomenon in the Radial Extrusion Process of Hollow Parts with a Flange
Analysis of Tool Geometry and Lubrication Conditions Effect on the Forming Load During Wire Drawing Process
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top