Keyword 3D printing
Procedural Analysis of the Parameters of 3D Printing Technology in the Process of Manufacturing Objects for Visually Impaired People
Adv. Sci. Technol. Res. J. 2022; 16(5):299-311
Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Adv. Sci. Technol. Res. J. 2022; 16(5):52-63
The Method of Decomposition of Architectural Objects for the preparation of 3D Virtual Models and Replication
Adv. Sci. Technol. Res. J. 2021; 15(2):247-257
Use of 3D Parametric Models in the Automotive Component Design Process
Adv. Sci. Technol. Res. J. 2021; 15(1):255-264
Modern Reverse Engineering Methods Used to Modification of Jewelry
Adv. Sci. Technol. Res. J. 2020; 14(4):298-306
Rapid Manufacturing of Individualized Prosthetic Sockets
Adv. Sci. Technol. Res. J. 2020; 14(1):42-49
Prototyping of an Individualized Multi-Material Wrist Orthosis using Fused Deposition Modelling
Adv. Sci. Technol. Res. J. 2019; 13(4):39-47
Methodology of Low Cost Rapid Manufacturing of Anatomical Models with Material Imitation of Soft Tissues
Adv. Sci. Technol. Res. J. 2019; 13(4):120-128
Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING
Adv. Sci. Technol. Res. J. 2017; 11(1):128-137
The influence of polymer materials and internal density on the parameters of FFF samples during tensile testing
Małgorzata Ewa Gontarz-Kulisiewicz, Grzegorz Budzik, Tomasz Dziubek, Bartłomiej Sobolewski, Łukasz Przeszłowski
Partial maxillofacial reconstruction: design and additive manufacturing of individualized pre- and mid-surgery supplies
Adv. Sci. Technol. Res. J. 2025; 19(8):114-125
Analysis of fused filament fabrication / fused deposiotion modelling applications for production of casting patterns used in sand casting
Adv. Sci. Technol. Res. J. 2025; 19(7):427-439
The application of additive manufacturing technology in designing and producing individualized lower limb orthoses
Klaudia Jańczak, Filip Górski, Magdalena Żukowska, Justyna Barbara Rybarczyk, Tomasz Barteczka, Wiesław Kuczko
Adv. Sci. Technol. Res. J. 2025; 19(7):346-359
Effect of zinc oxide nanoparticles on the mechanical properties of the recycle acrylonitrile butadiene styrene polymers
Adv. Sci. Technol. Res. J. 2025; 19(6):84-93
Monte Carlo validation of the pairwise comparisons method accuracy improvement for 3D objects
Waldemar W. Koczkodaj, Konrad Kułakowski, Meng Cheng Lau, Witold Pedrycz, Alexander Pigazzini, Yingli Song, Dominik Strzalka, Tomasz Żądło
Adv. Sci. Technol. Res. J. 2025; 19(6):194-202
Influence of 3D printing technology on reproducing cultural objects in the context of visually impaired people
Adv. Sci. Technol. Res. J. 2025; 19(6):121-130
Implement the artificial neural network concept for predicting the mechanical properties of printed polylactic acid parts
Adv. Sci. Technol. Res. J. 2025; 19(5):73-83
A novel machine learning system for early defect detection in 3D printing
Adv. Sci. Technol. Res. J. 2025; 19(3):134-143
Thermal analysis of the debinding process of filaments with H13 steel powder
Adv. Sci. Technol. Res. J. 2025; 19(1):321-332
The Influence of 3D Printing Direction on the Mechanical Properties of Manufactured Elements
Adv. Sci. Technol. Res. J. 2024; 18(8):86-95
Optimization of Microcapillary Flow Devices 3D Printed with Stereolithography Technology
Adv. Sci. Technol. Res. J. 2024; 18(7):289-304
Quality Assessment of Braille Dots Printed by Fused Deposition Modeling 3D Printing Technology
Adv. Sci. Technol. Res. J. 2024; 18(6):321-330
Individualized 3D Printed Orthopaedic and Prosthetic Devices Using AutoMedPrint Technology – Methodologies and Examples
Filip Górski, Yuliia Denysenko, Wiesław Kuczko, Magdalena Żukowska, Radosław Wichniarek, Przemysław Zawadzki, Justyna Rybarczyk
Adv. Sci. Technol. Res. J. 2024; 18(6):145-158
Experimental-Numerical Analysis of Thin-Walled Box Structures Stiffened with Corrugated Ribs, Subjected to Torsion
Adv. Sci. Technol. Res. J. 2024; 18(5):287-297
Characteristics of the Porous Structure Developed Through Additive Manufacturing using Polyamide for Tissue Engineering Applications
Adv. Sci. Technol. Res. J. 2024; 18(5):90-100
Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses
Justyna Barbara Rybarczyk, Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Sabina Siwiec, Nikola Vitkovic, Razvan Pacurar
Adv. Sci. Technol. Res. J. 2024; 18(4):191-215
Autocatalytic Metallization of Polymer Materials Produced by the Additive Technology
Adv. Sci. Technol. Res. J. 2024; 18(4):97-110
The Influence of Printing Parameters on Leakage and Strength of Fused Deposition Modelling 3D Printed Parts
Adv. Sci. Technol. Res. J. 2024; 18(1):195-201
Measurements of Tensile Strength and Elongation of 3D Printed Polylactide Solids Produced with Different Temperatures of Extruder Using Coordinate Measuring Technique and Finite Element Method
Adv. Sci. Technol. Res. J. 2023; 17(6):356-366
Geometrical Accuracy and Strength of Micro-Needles Made of Polylactide by Fused Filament Fabrication Method
Radosław Wichniarek, Wiesław Kuczko, Dorota Tomczak, Ariadna Nowicka, Monika Wojtyłko, Anna Froelich, Tomasz Osmałek
Adv. Sci. Technol. Res. J. 2023; 17(6):116-126
Experimental-Numerical Analysis of a Flat Plate Subjected to Shearing and Manufactured by Incremental Techniques
Adv. Sci. Technol. Res. J. 2023; 17(4):179-188
Parametric Prediction of FDM Process to Improve Tensile Properties Using Taguchi Method and Artificial Neural Network
Adv. Sci. Technol. Res. J. 2023; 17(4):130-138
The Impact of FDM Process Parameters on the Compression Strength of 3D Printed PLA Filaments for Dental Applications
Adv. Sci. Technol. Res. J. 2023; 17(4):121-129
Risk Assessment of Individualized 3D Printed Prostheses Using Failure Mode and Effect Analysis
Adv. Sci. Technol. Res. J. 2022; 16(4):189-200
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
