All issues
Volume 11, Issue 3, 2017
Analysis of the Impact of Double Shot Peening on the Value of Roughness Parameter and Distribution of Stresses in the RSA 501 Alloy (Al Mg5 Mn1 Sc0.8 Zr0.4)
Adv. Sci. Technol. Res. J. 2017; 11(3):1–9
Evaluating Main Parameters Effects of Near-Field Earthquakes on the Behavior of Concrete Structures with Moment Frame System
Adv. Sci. Technol. Res. J. 2017; 11(3):10–23
Gas Evolution Qualitative Analyses From Modified Cellulose Mixtures During Thermal Degradation in Air and Argon
Adv. Sci. Technol. Res. J. 2017; 11(3):24–30
Evaluation of the Reduction of Seismic Response of Adjacent Structures Using Viscous Damper Joint
Adv. Sci. Technol. Res. J. 2017; 11(3):31–47
Application of System Modeling and Simulation of the Photovoltaic Production
Adv. Sci. Technol. Res. J. 2017; 11(3):48–55
Optimal Design of Fractional Sliding Mode Control Based on Multi-Objective Genetic Algorithm for a Two-Link Flexible Manipulator
Adv. Sci. Technol. Res. J. 2017; 11(3):56–65
The Effect of Particulate Fillers on Hardness of Polymer Composite
Adv. Sci. Technol. Res. J. 2017; 11(3):66–71
EDM of Aluminum Alloy 6061 Using Graphite Electrode Using Paraffin Oil and Distilled Water as Dielectric Medium
Adv. Sci. Technol. Res. J. 2017; 11(3):72–79
Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates
Adv. Sci. Technol. Res. J. 2017; 11(3):80–86
Local Resistance of Heating Molybdenum Sheet in a Test Device
Adv. Sci. Technol. Res. J. 2017; 11(3):87–93
FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy
Adv. Sci. Technol. Res. J. 2017; 11(3):94–101
Prototyping of Cosmetic Prosthesis of Upper Limb Using Additive Manufacturing Technologies
Adv. Sci. Technol. Res. J. 2017; 11(3):102–108
Effect of Eccentricity of Load on Critical Force of Thin-Walled Columns CFRP
Adv. Sci. Technol. Res. J. 2017; 11(3):109–113
Variable Valve Timing Scheduling in a 4-Stroke Internal Combustion Cylinder Utilizing Artificial Neural Networks
Adv. Sci. Technol. Res. J. 2017; 11(3):114–121
Analysis of Fiber Orientation in the Wood-Polymer Composites (WPC) on Selected Examples
Adv. Sci. Technol. Res. J. 2017; 11(3):122–129
An Experimental Study on Wall Thickness Distribution in Thermoforming
Adv. Sci. Technol. Res. J. 2017; 11(3):139–142
Wave Propagation Characteristics in Functionally Graded Double-Beams
Adv. Sci. Technol. Res. J. 2017; 11(3):143–149
Analysis of an Axle Shaft Fatigue Failure and Anti-Fatigue System Design
Adv. Sci. Technol. Res. J. 2017; 11(3):150–163
Analysis and Assessment of Dynamic Response to Passengers During Lift Emergency Braking
Adv. Sci. Technol. Res. J. 2017; 11(3):164–171
Environment Adaptive Lighting Systems for Smart Homes
Adv. Sci. Technol. Res. J. 2017; 11(3):172–178
Modeling of Thermal Cycle CI Engine with Multi-Stage Fuel Injection
Arkadiusz Jamrozik, Wojciech Tutak, Adam Gnatowski, Renata Gnatowska, Jerzy Winczek, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2017; 11(3):179–186
The Use of Lean Manufacturing Techniques – SMED Analysis to Optimization of the Production Process
Adv. Sci. Technol. Res. J. 2017; 11(3):187–195
Proposal of the Sound Insulating Measures for Vibrational Sorter and Verification of the Effectiveness Measures
Adv. Sci. Technol. Res. J. 2017; 11(3):196–203
Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Adv. Sci. Technol. Res. J. 2017; 11(3):204–210
Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
Adv. Sci. Technol. Res. J. 2017; 11(3):211–222
An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location
Adv. Sci. Technol. Res. J. 2017; 11(3):223–232
Structural and Thermal Properties of Nanocomposites Based on Polyolefins and Montmorillonite Modified with Ethyl 2-Aminobenzoate
Adv. Sci. Technol. Res. J. 2017; 11(3):233–239
Impact of the Technological Conditions of Plane Surface Machining on a Triangular Milling Cutter on the Residual Hysteresis of the Movement Axis of the Machine
Adv. Sci. Technol. Res. J. 2017; 11(3):240–245
Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Adv. Sci. Technol. Res. J. 2017; 11(3):246–252
Structure and Construction Assessment of the Surface Layer of Hardfaced Coating after Friction
Adv. Sci. Technol. Res. J. 2017; 11(3):253–260
Artificial Neural Network Modelling of Vibration in the Milling of AZ91D Alloy
Adv. Sci. Technol. Res. J. 2017; 11(3):261–269
Effect of Abrasive Waterjet Peening Surface Treatment of Steel Plates on the Strength of Single-Lap Adhesive Joints
Adv. Sci. Technol. Res. J. 2017; 11(3):270–276
Assessment of the Impact of Probe Head Hysteresis on the Accuracy of Five-Axis Coordinate Measuring Systems
Adv. Sci. Technol. Res. J. 2017; 11(3):277–282
Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies
Adv. Sci. Technol. Res. J. 2017; 11(3):283–288
Influence of Machining Strategies and Technological History of Semi-Finished Product on the Deformation of Thin-Wall Elements After Milling
Adv. Sci. Technol. Res. J. 2017; 11(3):289–296
Analysis of Structure and Shear/Peel Strength of Refill Friction Stir Spot Welded 7075-T6 Aluminium Alloy Joints
Adv. Sci. Technol. Res. J. 2017; 11(3):297–303
Rheological Properties of Compositions Based on Modified Polyvinyl Alcohol
Adv. Sci. Technol. Res. J. 2017; 11(3):304–309
Most read
- Month
- Year