All issues
Volume 14, Issue 2, 2020
Mechanical and Thermal Stresses in an HPDC Machine Plunger During the Dosing and Filling Process
Adv. Sci. Technol. Res. J. 2020; 14(2):1–12
The Effect of Modifier on the Microstructure of the AlSi10CuNiMn Alloy
Adv. Sci. Technol. Res. J. 2020; 14(2):13–18
Potential and Limits of Overall Equipment Effectiveness in the Total Productivity Management
Adv. Sci. Technol. Res. J. 2020; 14(2):19–26
Mathematical Modeling of Material Erosion During the Electrical Discharge
Adv. Sci. Technol. Res. J. 2020; 14(2):27–33
Analysis of the Post-Critical Deformation State of Curvilinear Integral Stiffening of a Thin-Walled Structure Subjected to Torsion
Adv. Sci. Technol. Res. J. 2020; 14(2):34–40
Experimental Investigation of Diesel Engine Powered with Fuel Microemulsion
Adv. Sci. Technol. Res. J. 2020; 14(2):41–48
Determination of the Value of the Damage Function in 1050A Aluminium Alloy
Adv. Sci. Technol. Res. J. 2020; 14(2):49–55
Cavitating Fuel Flows in Hypocycloid Pump from the Perspective of Applying the Effect of Gas Desorption from the Solution with Nucleation of Gas Bubbles
Adv. Sci. Technol. Res. J. 2020; 14(2):56–66
Study of the Performance of Natural Fiber Reinforced Composites for Wind Turbine Blade Applications
Adv. Sci. Technol. Res. J. 2020; 14(2):67–75
The Effects of Hot Deformation Parameters on the Size of Dynamically Recrystallised Austenite Grains of HSLA Steel
Adv. Sci. Technol. Res. J. 2020; 14(2):76–84
Bending Moment and Cross-Section Deformation of a Box Profile
Adv. Sci. Technol. Res. J. 2020; 14(2):85–93
Effect of Test Velocity on the Energy Absorption Under Progressive Crushing of Composite Tubes
Adv. Sci. Technol. Res. J. 2020; 14(2):94–102
Application of X-ray Diffraction for Residual Stress Analysis in Truncated Cones Made by Incremental Forming
Adv. Sci. Technol. Res. J. 2020; 14(2):103–111
Indentation Hardness and Tribological Wear in Conditions of Sliding Friction of the Surface Layer of Composites Based on Methacrylate Resins with Ceramic Nanofiller
Adv. Sci. Technol. Res. J. 2020; 14(2):112–119
Solving the Spatial Relationships in Manufacturing Systems
Adv. Sci. Technol. Res. J. 2020; 14(2):120–130
Concrete Capillarity under Different Curing Conditions Produced in Kurdistan-Iraq
Adv. Sci. Technol. Res. J. 2020; 14(2):131–139
Machining of Composite Materials by Ultrasonic Assistance
Adv. Sci. Technol. Res. J. 2020; 14(2):140–144
The Effect of Sintering Time on Wear Resistance of Silicon Nitride
Adv. Sci. Technol. Res. J. 2020; 14(2):145–154
Stress Concentration Analysis of the Injection Pump Shaft
Paweł Bałon, Andrzej Świątoniowski, Edward Rejman, Bartłomiej Kiełbasa, Robert Smusz, Janusz Szostak, Łukasz Kowalski
Adv. Sci. Technol. Res. J. 2020; 14(2):155–162
Impact of Assembly Method on the Strength of Single-Lap Joints of Aircraft Aluminum Alloy Sheets
Adv. Sci. Technol. Res. J. 2020; 14(2):163–170
Prediction of Surface Roughness Based on the Machining Conditions with the Effect of Machining Stability
Adv. Sci. Technol. Res. J. 2020; 14(2):171–183
Specific Cutting Conditions of 100Cr6 Steel Grinding and Selected Final Roughness Parameters
Adv. Sci. Technol. Res. J. 2020; 14(2):184–189
Pallet Fixing Lock, Determination of Shear Resistance and Spring Stiffness
Adv. Sci. Technol. Res. J. 2020; 14(2):190–197
A Computational Algorithm for Path Interval Determination in Multi-Axis Filleted End Milling
Adv. Sci. Technol. Res. J. 2020; 14(2):198–205
Analysis of Energy Consumption in the Production Chain of Heat from Pellet
Adv. Sci. Technol. Res. J. 2020; 14(2):206–214
Visual Effects of Surface Emissivity in Thermal Imaging
Adv. Sci. Technol. Res. J. 2020; 14(2):215–222
Selected Issues on the Operation of the Internal Combustion Engine Turbocharger
Adv. Sci. Technol. Res. J. 2020; 14(2):223–232
Structural Size Optimization of an External Fixation Device
Adv. Sci. Technol. Res. J. 2020; 14(2):233–240
Most read
