PL EN
IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625
 
Więcej
Ukryj
1
Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. Listopadu 2172/15 1, 708 00, Ostrava, Czech Republic
 
2
Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Data publikacji: 01-12-2016
 
 
Adv. Sci. Technol. Res. J. 2016; 10(32):24-31
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The article is focussed on comparing and determining the impact of the cutting geometry of the cutting tool due to dynamic load on system and microgeometry machined surface. For longitudinal turning nickel alloy Alloy 625 (W. Nr. 2.4856) rounded indexable cutting insert was used (RCMT 10T3M0 – F2) and its equivalent squared indexable cutting insert (SNMG 120412 – MR3) coated with fine-grained PVD (Ti, Al) N + TiN. Experimental testing of nickel Alloy 625 was under predetermined cutting conditions. In the selected depth of the removed material of 0.5 mm and 1.5 mm was measured in the course of machining the size of the individual components of cutting forces.
Journals System - logo
Scroll to top