Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups
Janka Majerníková 1  
,  
Emil Spišák 1  
,  
Ľuboš Kaščák 1  
,  
Ján Slota 1  
 
 
Więcej
Ukryj
1
Technical University of Košice, Letná 9, 040 02 Košice, Slovak Republic
AUTOR DO KORESPONDENCJI
Emil Spišák   

Technical University of Košice, Letná 9, 040 02 Košice, Slovak Republic
Data publikacji: 01-12-2018
 
Adv. Sci. Technol. Res. J. 2018; 12(4):28–34
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE ARTYKUŁU
During the processing of the thin packaging sheets by drawing, thickness of the material changes and so does the thickness of tin layer, this has an influence on the corrosion resistance. Change in material thickness of the cylindrical cups without a flange has been evaluated in this contribution. Cups were produced from the double reduced continuously annealed packaging sheets. After cupping test, the anisotropy of these sheets was evaluated too, this was expressed through the earring formation on the cups.