Topic Thermodynamics and Thermal Technology
Modeling of a Primary Air Distribution in a Plenum Chamber of the 700 MWth Circulating Fluidized Bed Boiler
Adv. Sci. Technol. Res. J. 2022; 16(5):86-99
Rational Liquid Cooling Systems of Internal Combustion Engines
Adv. Sci. Technol. Res. J. 2022; 16(1):158-169
Working Fluid Selection for Simple and Recuperative Organic Rankine Cycle Operating Under Varying Conditions: A Comparative Analysis
Adv. Sci. Technol. Res. J. 2021; 15(4):202-221
Numerical and Experimental Investigation of the Influence of External Wall Moisture on Building Temperature Distributions
Adv. Sci. Technol. Res. J. 2021; 15(3):297-308
Thermodynamic Analysis of Precipitation Process of MX-type Phases in High Strength Low Alloy Steels
Adv. Sci. Technol. Res. J. 2021; 15(2):90-100
Study of Selected Parameters of Coal Burned in a Combined Heat and Power Plant
Adv. Sci. Technol. Res. J. 2021; 15(2):108-115
Relative Change in SI Engine Performance Using Hydrogen and Alcohol as Fuel Supplements to Gasoline
Adv. Sci. Technol. Res. J. 2021; 15(1):144-155
Numerical investigation of the effect of orifice number and diameter in a turbulent jet ignition system on hydrogen combustion
Adv. Sci. Technol. Res. J. 2026; 20(3)
Experimental investigation of a downdraft gasifier for efficient syngas production using Iraqi waste
Adv. Sci. Technol. Res. J. 2026; 20(3)
Numerical analysis of rotation step and tracking strategy in flat-plate solar collectors: Thermal performance and cost-effectiveness
Adv. Sci. Technol. Res. J. 2026; 20(3)
Experiment investigating the effect of ZnO nano-particles on diesel engine performance and emissions
Adv. Sci. Technol. Res. J. 2026; 20(1):491-500
Evaluation and improvement of thermal insulation systems in residential buildings through thermal modeling
Adv. Sci. Technol. Res. J. 2025; 19(9):266-280
Experimental study of vapor compression refrigeration system using mixing refrigerant (R290/R600a) compare with nano refrigerant (R600a/Al2O3)
Sura Saher Youssif, Omran A. Shabeeb, Hamid Mohammed Mahan, Sergey V. Konovalov, Ahmed Abdul Azeez Ismael
Adv. Sci. Technol. Res. J. 2025; 19(8):177-189
Microstructural and thermal property modifications of Sn-43Bi solder alloys via selective alloying with Se, In, Zn, and Al
Adv. Sci. Technol. Res. J. 2025; 19(8):273-284
IR radiation method in moisture testing of various types of grains
Adv. Sci. Technol. Res. J. 2025; 19(8):413-422
Microplasma spraying of coatings from wire of heat-resistant nickel alloy Inconel 82 with laser melting
Volodymyr Korzhyk, Shiyi Gao, Vladyslav Khaskin, Artemyi Bernatskyi, Oleksandr Kislitsya, Sergyi Voinarovych, Yevhenii Kuzmych-Yanchuk, Sergyi Kaluzhnyi, Yanchao Hu, Guirong Guirong
Adv. Sci. Technol. Res. J. 2025; 19(7):164-178
Parametric analysis of wet-multi-cylinder humidification
Mayas Mohammad Al-mahasne, Ahmad Qandil, Nabil Beithou, Nasser Abdellatif, Mohd Mansour, Gabriel Borowski, Sameh Alsaqoor
Adv. Sci. Technol. Res. J. 2025; 19(5):224-231
Harnessing waste-to-energy potential from plastic waste co-incineration
Agnieszka Kijo-Kleczkowska, Adam Gnatowski, Jarosław Krzywański, Dariusz Kwiatkowski, Iliya Iliev, Ivan Beloev, Muhammad Wakil Shahzad, Rasikh Tariq
Adv. Sci. Technol. Res. J. 2025; 19(5):232-247
Effect of the amount and location of phase change materials in a fibre reinforced composite matrix on ablative properties
Adv. Sci. Technol. Res. J. 2025; 19(3):228-237
Effect of the addition of microencapsulated phase change material to epoxy resin on the thermal diffusivity of the resulting structure
Adv. Sci. Technol. Res. J. 2025; 19(2):445-452
Comparison and mathematical modeling of surge avoidance methods in turbojet engine compressor
Adv. Sci. Technol. Res. J. 2025; 19(1):148-159
Disturbances in-situ measurement results on the example of heat transport in multilayer building walls
Adv. Sci. Technol. Res. J. 2025; 19(1):197-208
Investigation of Spectral Parameters of Constricted arc Plasma for Controlling Welding Processes and Related Technologies
Valeriy Chernyak, Volodymyr Korzhyk, Shiyi Gao, Vladyslav Khaskin, Oleksandr Voitenko, Yevhenii Illiashenko, Xinxin Wang, Andrii Grynyuk, Oksana Konoreva, Iryna Sviridova
Adv. Sci. Technol. Res. J. 2024; 18(7):250-263
Development and Analysis of Current Collectors for Proton Exchange Membrane Fuel Cells
Adv. Sci. Technol. Res. J. 2024; 18(6):331-340
New Approaches to Generalized Logistic Equation with Bifurcation Graph Generation Tool
Adv. Sci. Technol. Res. J. 2024; 18(6):1-12
Developing a High-Performance System to Strengthen Construction Structures Against Mechanical Fatigue Using Shape Memory Materials
Adv. Sci. Technol. Res. J. 2024; 18(5):186-194
High-Temperature Two-Stage Subcritical Heat Pump Running on Environmentally Friendly Refrigerants
Adv. Sci. Technol. Res. J. 2024; 18(3):369-381
Temperature Effect on Buckling Properties of Thin-Walled Composite Profile Subjected to Axial Compression
Adv. Sci. Technol. Res. J. 2024; 18(3):305-313
Enhancing Thermal Performance of Hot Storage Tanks through Chimney-Type Electric Heating and Natural Circulation
Nabil Beithou, Nassir Abdallatif, Mohammad Bani Khalid, Hani Attar, Sameh Alsaqoor, Ali Alahmer, Gabriel Borowski, Samer As’ad, Artur Andruszkiewicz, Reema Al-dalain
Adv. Sci. Technol. Res. J. 2024; 18(3):151-160
Effect of Trenched Hemispherical Pin Fins on Cooling Performance of Heat Sink
Aissa Yousfi, Lahcene Bellahcene, Faris Alqurashi, Djamel Sahel, Mohamed Teggar, Abdelghani Laouer, Müslüm Arıcı, Mohamed Kchaou
Adv. Sci. Technol. Res. J. 2024; 18(3):33-44
Influence of Selected Weather Conditions on the Photovoltaic System Efficiency in Central Poland – Case Study
Adv. Sci. Technol. Res. J. 2024; 18(2):177-186
Impacts of Using Exhaust Gas Recirculation and Various Amount of Dimethyl Ether Premixed Ratios on Combustion and Emissions on a Dual-Fuel Compression Ignition Engine
Adv. Sci. Technol. Res. J. 2024; 18(2):196-213
The Possibility of Using the Finite Element Method for Determining Thermal Diffusivity on the Example of Nickel Using the Classic and The Modified Pulse Method
Adv. Sci. Technol. Res. J. 2023; 17(6):274-287
Tribology Characteristics of Heatproof Alloys at a Dynamic Pin Ladening in the Variable Temperature Field
Michał Bembenek, Volodymyr Tsyganov, Nataliia Sakhniuk, Olha Lazarieva, Ryszard Machnik, Liubomyr Ropyak
Adv. Sci. Technol. Res. J. 2023; 17(5):140-152
Investigation of Carbon Nanotube Particles Addition Effect on the Dispersed Composite Structure Thermal Diffusivity
Adv. Sci. Technol. Res. J. 2023; 17(5):280-288
Investigation of Multi-Cold Rolling Passes on Mechanical Characteristics and Surface Quality of AlCuV Alloy
Adv. Sci. Technol. Res. J. 2023; 17(5):68-76
Compressor Heat Pump Model Based on Refrigerant Enthalpy and Flow Rate
Adv. Sci. Technol. Res. J. 2023; 17(5):12-27
Effect of Changes in the Roughness of the Inflow Surface of a Sloping Segmental Orifice with Point Pressure Reception on Its Characteristics
Adv. Sci. Technol. Res. J. 2023; 17(4):150-161
Application of Laboratory Tests in Numerical Analysis for Exhaust Emissions in Business Jet Engines
Adv. Sci. Technol. Res. J. 2023; 17(4):21-35
Effect of the Residential Photovoltaic Systems Evolution on Electricity and Thermal Energy Usage in Jordan
Nabil Beithou, Mohammad A. Mansour, Nasser Abdellatif, Sameh Alsaqoor, Sultan Tarawneh, Ala H. Jaber, Artur Andruszkiewicz, Moh'd Alsqour, Gabriel Borowski, Ali Alahmer, Julia Siderska
Adv. Sci. Technol. Res. J. 2023; 17(3):79-87
The Influence of Metal Reinforcement upon the Ablative Properties of Multi-Layered Composites
Adv. Sci. Technol. Res. J. 2023; 17(2):111-119
Experimental and Numerical Characterizataion of Thermal Bridges in Windows
Adv. Sci. Technol. Res. J. 2023; 17(1):315-331
Daily Analysis of Changes Taking Place in Heat Exchangers Used in Combined Heat and Power Plants
Adv. Sci. Technol. Res. J. 2022; 16(6):258-266
Thermal Desorption of Argon Implanted into Gallium Arsenide
Adv. Sci. Technol. Res. J. 2022; 16(4):318-326
Thermodynamic Analysis of Precipitation Process of Complex Carbonitride TixV1-xCyN1-y in HSLA-Type Steel
Adv. Sci. Technol. Res. J. 2022; 16(4):64-73
Possibilities for Improving the Cooling Systems of IC Engines of Marine Power Plants
Adv. Sci. Technol. Res. J. 2022; 16(3):183-192
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
