PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 17, 2, 2023
 
 

A High Gain Single Switch DC-DC Converter with Double Voltage Booster Switched Inductors
Nagaraju Addagatla, Rajender Boini
Adv. Sci. Technol. Res. J. 2023; 17(2):1-11
DOI: https://doi.org/10.12913/22998624/161447
 

Analysis of Torsional Strength of PA2200 Material Shape Additively with the Selective Laser Sintering Technology
Jacek Bernaczek, Mariusz Dębski, Małgorzata Gontarz, Roman Grygoruk, Jerzy Józwik, Bogdan Kozik, Piotr Mikulski
Adv. Sci. Technol. Res. J. 2023; 17(2):12-24
DOI: https://doi.org/10.12913/22998624/158838
 

Investigations on the Microstructure and Corrosion Performance of Different WC-Based Cermet Coatings Deposited by High Velocity Oxy Fuel Process onto Magnesium Alloy Substrate
Ewa Jonda, Leszek Łatka, Artur Maciej, Alexandr Khozhanov
Adv. Sci. Technol. Res. J. 2023; 17(2):25-35
DOI: https://doi.org/10.12913/22998624/160513
 

Numerical Modelling and Experimental Testing on Polyurethane Adhesively Bonded Joints Behaviour in Wood-Wood and Wood-Carbon Fibre Reinforced Polymer Layouts
Bartosz Kawecki
Adv. Sci. Technol. Res. J. 2023; 17(2):36-52
DOI: https://doi.org/10.12913/22998624/159723
 

Influence of the Curing Process on the Fatigue Strength and Residual Strength of a Fiber Composite Estimation Using the Theory of Markov Chains
Rafał Chatys, Mariusz Kłonica
Adv. Sci. Technol. Res. J. 2023; 17(2):53-62
DOI: https://doi.org/10.12913/22998624/161488
 

Evaluation of the Surface Topography of Ti6Al4V Alloy after the Finish Turning Process under Ecological Conditions
Radosław Maruda, Kamil Leksycki, Szymon Wojciechowski, Eugene Feldshtein, Andrzej Łukaszewicz
Adv. Sci. Technol. Res. J. 2023; 17(2):63-70
DOI: https://doi.org/10.12913/22998624/159801
 

Modelling of Drive System Operation of a Wind Power Plant
Karol Osowski, Wojciech Iwanicki, Jarosław Kotliński, Ireneusz Musiałek, Andrzej Kęsy, Zbigniew Kęsy
Adv. Sci. Technol. Res. J. 2023; 17(2):71-89
DOI: https://doi.org/10.12913/22998624/162104
 

The Computational Method of Predicting the Crack Path in Confrontation with Laboratory Tests
Jakub Gontarz, Jerzy Podgórski
Adv. Sci. Technol. Res. J. 2023; 17(2):90-110
DOI: https://doi.org/10.12913/22998624/161007
 

The Influence of Metal Reinforcement upon the Ablative Properties of Multi-Layered Composites
Paweł Przybyłek, Andrzej Komorek, Robert Szczepaniak
Adv. Sci. Technol. Res. J. 2023; 17(2):111-119
DOI: https://doi.org/10.12913/22998624/161427
 

Enhancing Intrusion Detection in Industrial Internet of Things through Automated Preprocessing
Anıl Sezgin, Aytuğ Boyacı
Adv. Sci. Technol. Res. J. 2023; 17(2):120-135
DOI: https://doi.org/10.12913/22998624/162004
 

Influence of the Quality of Metal Sheet Edges After Strip Slitting Processes in Integrated Lines on the Quality of Laser Welds
Marcin Stańczyk
Adv. Sci. Technol. Res. J. 2023; 17(2):136-146
DOI: https://doi.org/10.12913/22998624/161239
 

Abrasive Wear Mechanisms of S235JR, S355J2, C45, AISI 304, and Hardox 500 Steels Tested Using Garnet, Corundum and Carborundum Abrasives
Mirosław Szala, Michał Szafran, Jonas Matijošius, Kazimierz Drozd
Adv. Sci. Technol. Res. J. 2023; 17(2):147-160
DOI: https://doi.org/10.12913/22998624/161277
 

The Possibility of Using Sewage Sludge Pellets as Thermal Insulation
Piotr Kosiński, Bartosz Kask, Małgorzata Franus, Magdalena Piłat-Rożek, Joanna Szulżyk-Cieplak, Grzegorz Łagód
Adv. Sci. Technol. Res. J. 2023; 17(2):161-172
DOI: https://doi.org/10.12913/22998624/159724
 

Determination of Critical Damage Function Values of CW008A Copper and S355 Steel in Tensile and Torsion Tests
Patrycja Walczuk-Gągała, Zbigniew Pater, Łukasz Wójcik, Konrad Lis
Adv. Sci. Technol. Res. J. 2023; 17(2):173-180
DOI: https://doi.org/10.12913/22998624/161053
 

Safety in Rough Milling of Magnesium Alloys Using Tools with Variable Cutting Edge Geometry
Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2023; 17(2):181-191
DOI: https://doi.org/10.12913/22998624/159637
 

Analysis and Improvement of an Industrial Process of Hot Die Forging of an Elongated Forging Tipped with a Joggle with the Use of Numerical Simulation Results
Marek Robert Hawryluk, Marcin Rychlik, Sławomir Polak, Maciej Zwierzchowski, Łukasz Dudkiewicz, Jan Marzec, Paweł Jabłoński
Adv. Sci. Technol. Res. J. 2023; 17(2):192-205
DOI: https://doi.org/10.12913/22998624/162158
 

Microbiological Analysis of Coolant Used in Machining
Jerzy Józwik, Magdalena Michałowska, Grzegorz Budzik, Stanisław Legutko, Maciej Kupczyk
Adv. Sci. Technol. Res. J. 2023; 17(2):206-214
DOI: https://doi.org/10.12913/22998624/157421
 

Mathematical and Technical Quantitative Methods for Risk Assessment in Public Crisis Management
Marek Kisilowski
Adv. Sci. Technol. Res. J. 2023; 17(2):215-225
DOI: https://doi.org/10.12913/22998624/162188
 

Mechanically Stimulated Changes in Surface Electrical Conductivity of X-Irradiated Silicon Crystals
Roman Lys, Marta Żyłka, Josyp Shykorjak, Dmytro Slobodzyan, Wojciech Żyłka, Bohdan Pavlyk
Adv. Sci. Technol. Res. J. 2023; 17(2):226-231
DOI: https://doi.org/10.12913/22998624/159135
 

Experimental Research in the Aspect of Determining the Mechanical and Strength Properties of the Composite Material Made of Carbon-Epoxy Composite
Patryk Różyło, Wojciech Smagowski, Jakub Paśnik
Adv. Sci. Technol. Res. J. 2023; 17(2):232-246
DOI: https://doi.org/10.12913/22998624/161598
 

Effect of Volume Percentage of Reinforcement on the Microstructure and Mechanical Properties of an Al6061-T6/SiC Surface Composite Fabricated Through Friction Stir Processing
Abdul Jabbar Ansari, Mohd. Anas
Adv. Sci. Technol. Res. J. 2023; 17(2):247-257
DOI: https://doi.org/10.12913/22998624/161690
 

Evaluation of Wear Resistance of Functional Composite Polymeric Materials and Durability of Metal-Polymer Bearings
Myron Chernets, Antoni Świć, Anatoliy Kornienko, Alina Yurchuk
Adv. Sci. Technol. Res. J. 2023; 17(2):258-267
DOI: https://doi.org/10.12913/22998624/161591
 

Comparative Evaluation of the Selected Mechanical Properties of Polymer Composites Reinforced with Glass and Hemp Fabrics
Mieczysław Scheibe, Katarzyna Bryll, Piotr Brożek, Dorota Czarnecka-Komorowska, Mariusz Sosnowski, Janusz Grabian, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2023; 17(2):268-278
DOI: https://doi.org/10.12913/22998624/161449
 

Analysis of Flow-Induced Vibrations in a Heat Exchanger Tube Bundle Subjected to Variable Tube Flow Velocity
Akmal Hafeez, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman, Muhammad Mohsin Rashid, Hasan Farid Khan, Muhammad Ayub, Adeel Qadir
Adv. Sci. Technol. Res. J. 2023; 17(2):279-288
DOI: https://doi.org/10.12913/22998624/161278
 

Material Selection of Collapsible Pot Hauler and Finite Element Analysis Simulation Applied to the Selected Material
Rahmad Surya Hadi Saputra, Budhi Hascaryo Iskandar, Vita Rumanti Kurniawati, Desrial Desrial, Ari Purbayanto
Adv. Sci. Technol. Res. J. 2023; 17(2):289-298
DOI: https://doi.org/10.12913/22998624/161238
 

Characteristic Features of Structure and Analysis of Friction Behavior of Electric-Spark Coatings from Powder Wires
Volodymyr Holubets, Mykhaylo Pashechko, Jaroslaw Borc, Yuriy Shpuliar, Oleksandr Hasiy, Ivan Honchar
Adv. Sci. Technol. Res. J. 2023; 17(2):299-306
DOI: https://doi.org/10.12913/22998624/160978
 

Modification of Concrete Surface with Higher Fatty Acids
Danuta Barnat-Hunek, Wojciech Andrzejuk, Małgorzata Szafraniec, Magdalena Kachel, Robert Hunek
Adv. Sci. Technol. Res. J. 2023; 17(2):307-321
DOI: https://doi.org/10.12913/22998624/159722
 

Ensemble Model for Network Intrusion Detection System Based on Bagging Using J48
Mohammad Mahmood Otoom, Khalid Nazim Abdul Sattar, Mutasim Al Sadig
Adv. Sci. Technol. Res. J. 2023; 17(2):322-329
DOI: https://doi.org/10.12913/22998624/161820
 

Effect of Annealing Treatment on (Mg17Al12) Phase Characterization and Corrosion Behavior in Different Solutions for AZ91 Alloy
Marwa H. Abass, Makarim H. Abdulkareem, Hussien A. Hussein
Adv. Sci. Technol. Res. J. 2023; 17(2):330-341
DOI: https://doi.org/10.12913/22998624/161831
 

A Short Overview of the Possibilities of Using Waste from the Agri-Food Industry
Magdalena Joka Yildiz, Monika Kalinowska, Katarzyna Kalinowska-Wichrowska, Ewelina Gołębiewska, Piotr Tarasewicz, Tomasz Bobin, Dominik Tarapata, Ewa Szatyłowicz, Jolanta Piekut
Adv. Sci. Technol. Res. J. 2023; 17(2):342-352
DOI: https://doi.org/10.12913/22998624/161840
 

Influence of Water-Jet on Micro-Formed Parts Process via Nano-Indentation and SEM Analysis
James Kwasi Quaisie, Philip Yamba, Vitus Mwinteribo Tabie, Anthony Akayeti, Jamal-Deen Kukurah, Abdul-Hamid Mohammed
Adv. Sci. Technol. Res. J. 2023; 17(2):353-361
DOI: https://doi.org/10.12913/22998624/161884
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top