PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access
All issues
Volume 16, Issue 4, 2022
 
 

Testing of Air-Cooling Efficiency of the Underside of a Turning Tool Carbide Insert in EN-GJL 250 Cast Iron Turning Operations
Marian Bartoszuk, Mariusz Prażmowski, Ihor Hurey
Adv. Sci. Technol. Res. J. 2022; 16(4):1–9
DOI: https://doi.org/10.12913/22998624/152123
 

Effect of Nanofillers on the Mechanical Properties of Vinyl Ester Resin Used as a Carbon Fiber Reinforced Polymer Matrix
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Krzysztof Ochałek, Katarzyna Burnat
Adv. Sci. Technol. Res. J. 2022; 16(4):10–21
DOI: https://doi.org/10.12913/22998624/152053
 

Tribological Properties of Al 7075 Composite Reinforced with ZrB2 Using Grey Relational Analysis
Srikanth Karumuri, V. Chittaranjan Das, Gopi Krishna Mallarapu
Adv. Sci. Technol. Res. J. 2022; 16(4):22–28
DOI: https://doi.org/10.12913/22998624/152020
 

Experimental Study of the Compression Ignition Engine Performance Using Various Bio Diesel Blends
Wail Murtada Adaileh
Adv. Sci. Technol. Res. J. 2022; 16(4):29–37
DOI: https://doi.org/10.12913/22998624/151943
 

Investigating the Effect of Photo-Oxidative Degradation on the Ageing Resistance of the Car Mudflaps Manufactured with Post-Production High-Density Polyethylene Wastes
Dorota Czarnecka-Komorowska, Swain Chandra, Bogdan Kopeć, Jacek Borowski, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2022; 16(4):38–47
DOI: https://doi.org/10.12913/22998624/151802
 

Indication of the Target Alternative Fuel for Shipping
Jerzy Herdzik
Adv. Sci. Technol. Res. J. 2022; 16(4):48–55
DOI: https://doi.org/10.12913/22998624/151757
 

Investigation on Corrosion Inhibition of Hura Crepitans for 2101 Duplex Stainless Steel in an Acidic Environment
Oluwafemi Temitayo Ogunmodede, Vawe Humwapwa, Johnson Jonathan, Ezekiel Adewole, Ilesanmi Osasona
Adv. Sci. Technol. Res. J. 2022; 16(4):56–63
DOI: https://doi.org/10.12913/22998624/151693
 

Thermodynamic Analysis of Precipitation Process of Complex Carbonitride TixV1-xCyN1-y in HSLA-Type Steel
Marek Opiela, Anna Wojtacha
Adv. Sci. Technol. Res. J. 2022; 16(4):64–73
DOI: https://doi.org/10.12913/22998624/151634
 

Creation of More Efficient Work Environment through the New Design of the Automatic Robotic Assembly Station
Naqib Daneshjo, Dušan Sabadka, Peter Malega, Matúš Dzuro, Michal Jankovič
Adv. Sci. Technol. Res. J. 2022; 16(4):74–84
DOI: https://doi.org/10.12913/22998624/151547
 

Shear-Induced Molecular Orientation of Compression Moulded PE-HD Sheets
Monika Chomiak, Józef Stabik
Adv. Sci. Technol. Res. J. 2022; 16(4):85–95
DOI: https://doi.org/10.12913/22998624/151925
 

Economic Assessment of Investment in Electric Buses and CNG Buses – A Case Study of a Public Transport Company
Jana Fabianová, Jaroslava Janekova
Adv. Sci. Technol. Res. J. 2022; 16(4):96–105
DOI: https://doi.org/10.12913/22998624/151801
 

Stress Analysis of Steel Beams Made of Sigma Cross-Section
Maciej Adam Dybizbański, Katarzyna Rzeszut, Aleksandra Szczepańska
Adv. Sci. Technol. Res. J. 2022; 16(4):106–118
DOI: https://doi.org/10.12913/22998624/151535
 

Tooth Contact Analysis of Cylindrical Gears with an Unconventional Tooth Profile
Michał Batsch, Dawid Wydrzyński, Łukasz Przeszłowski
Adv. Sci. Technol. Res. J. 2022; 16(4):119–129
DOI: https://doi.org/10.12913/22998624/152172
 

Evaluation the Effect of Adding Oil Shale Ash on the Compressive Strength of Concrete
Mousa Gougazeh
Adv. Sci. Technol. Res. J. 2022; 16(4):130–137
DOI: https://doi.org/10.12913/22998624/152455
 

Prediction of the Properties of Modified Phenol-Formaldehyde Composites Using Mathematical Modeling of the Composition of the Polymer Mixture
Volodymyr Krasinskyi, Tomasz Jachowicz, Rafał Malinowski, Krzysztof Bajer, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2022; 16(4):138–146
DOI: https://doi.org/10.12913/22998624/152454
 

Experimental Comparison of Pre-Trained Word Embedding Vectors of Word2Vec, Glove, FastText for Word Level Semantic Text Similarity Measurement in Turkish
Cagatay Neftali Tulu
Adv. Sci. Technol. Res. J. 2022; 16(4):147–156
DOI: https://doi.org/10.12913/22998624/152453
 

Oil Shale Ash as a Substitutional Green Component in Cement Production
Ashraf Alsafasfeh, Mohammad Alawabdeh, Diya Alfuqara, Mousa Gougazeh, Mazen N. Amaireh
Adv. Sci. Technol. Res. J. 2022; 16(4):157–162
DOI: https://doi.org/10.12913/22998624/152464
 

Cutting Mechanics when Turning Powder Metallurgy Produced Nickel-Cobalt Base Alloy with a Cubic Boron Nitride Insert
Waldemar Daź, Witold Habrat, Jarosław Tymczyszyn, Krzysztof Krupa
Adv. Sci. Technol. Res. J. 2022; 16(4):163–175
DOI: https://doi.org/10.12913/22998624/152525
 

Efficiency of Filters Filled with Rockfos for Phosphorus Removal from Domestic Sewage
Aneta Pytka-Woszczyło, Monika Różańska-Boczula, Magdalena Gizińska-Górna, Michał Marzec, Agnieszka Listosz, Krzysztof Jóźwiakowski
Adv. Sci. Technol. Res. J. 2022; 16(4):176–188
DOI: https://doi.org/10.12913/22998624/152527
 

Risk Assessment of Individualized 3D Printed Prostheses Using Failure Mode and Effect Analysis
Filip Górski, Natalia Sahaj, Wiesław Kuczko, Adam Hamrol, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2022; 16(4):189–200
DOI: https://doi.org/10.12913/22998624/152735
 

Microstructure and Hardness of Cold Forged 42CrMo4 Steel Hollow Component with the Outer Flange
Mirosław Szala, Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(4):201–210
DOI: https://doi.org/10.12913/22998624/152790
 

Acceptation of the Developed Mobile Virtual Reality Visualisations of 3D Objects from the Area of the Silk Road
Jerzy Montusiewicz, Marcin Barszcz, Stanisław Piotr Skulimowski, Katarzyna Baran, Rahim Kayumov
Adv. Sci. Technol. Res. J. 2022; 16(4):211–222
DOI: https://doi.org/10.12913/22998624/152822
 

Thermographic Analysis of Thermal Distribution in Human Teeth Based on Composite Fillings
Monika Ewa Ostapiuk, Agnieszka Wójcicka, Janusz Tarczydło, Sylwia Sulima, Bożena Tarczydło
Adv. Sci. Technol. Res. J. 2022; 16(4):223–231
DOI: https://doi.org/10.12913/22998624/152819
 

Microstructure and Properties of Dissimilar Joints of AISI 430 Steel with Inconel 625 Obtained by Electron Beam Welding
Małgorzata Dziekońska, Ewa Jonda, Marek Sroka, Marek Węglowski, Tymoteusz Jung
Adv. Sci. Technol. Res. J. 2022; 16(4):232–242
DOI: https://doi.org/10.12913/22998624/152529
 

Constructive Consistent Approximations in Pairwise Comparisons
Ryszard Kozera, Ryszard Smarzewski
Adv. Sci. Technol. Res. J. 2022; 16(4):243–255
DOI: https://doi.org/10.12913/22998624/153086
 

Dynamic Processes Modeling in a Peristaltic Pump with a Hydraulic Drive for the Bingham Fluid
Olha Dvirna, Vladimir Shatokhin, Yaroslav Ivanchuk, Natalia Veselovskaya, Wojciech Jurczak
Adv. Sci. Technol. Res. J. 2022; 16(4):256–269
DOI: https://doi.org/10.12913/22998624/152944
 

The Study of Geometry of the Selected Transition Curves in the Design of Circular Roads
Agata Basak
Adv. Sci. Technol. Res. J. 2022; 16(4):270–278
DOI: https://doi.org/10.12913/22998624/152936
 

Analysis of Tool Geometry and Lubrication Conditions Effect on the Forming Load During Wire Drawing Process
Jalil J. Shukur, Waqass S. Khudhir, Mohanad Qusay Abbood
Adv. Sci. Technol. Res. J. 2022; 16(4):279–286
DOI: https://doi.org/10.12913/22998624/152934
 

Analysis and Assessment of Aluminum and Aluminum-Ceramic Foams Structure
Michał Rogala, Wojciech Tuchowski, Dorota Czarnecka-Komorowska, Katarzyna Gawdzińska
Adv. Sci. Technol. Res. J. 2022; 16(4):287–297
DOI: https://doi.org/10.12913/22998624/153028
 

The Concept of Three-Dimensional Visualisation of Urbanised Areas for a 3D Real Property Register in Poland
Przemysław Leń, Klaudia Maciąg, Michał Maciąg, Monika Mika, Justyna Wójcik-Leń
Adv. Sci. Technol. Res. J. 2022; 16(4):298–308
DOI: https://doi.org/10.12913/22998624/152935
 

Comparative Tests of Electric Voltage and Resistance with the Use of Virtual Measurement Systems
Michał Macek, Paweł Kuźma, Wojciech Marek Żyłka, Marta Izabela Żyłka, Marcin Biskup
Adv. Sci. Technol. Res. J. 2022; 16(4):309–317
DOI: https://doi.org/10.12913/22998624/153403
 

Thermal Desorption of Argon Implanted into Gallium Arsenide
Marcin Turek, Andrzej Droździel, Krzysztof Pyszniak, Paweł Węgierek
Adv. Sci. Technol. Res. J. 2022; 16(4):318–326
DOI: https://doi.org/10.12913/22998624/153444
 
Most read
Indexes
 
Keywords index
Authors index
© 2006-2023 Journal hosting platform by Bentus