Advances in Science and Technology. Research Journal

ANALYSIS OF TYPICAL STRUCTURES OF DYNAMIC SYSTEMS OF MACHINING OF ELASTIC-DEFORMABLE SHAFTS WITH LOW RIGIDITY

Antoni Świć, Arkadiusz Gola, Dariusz Wołos

Adv. Sci. Technol. Res. J. 2018; 12(3):1–9

DOI: https://doi.org/10.12913/22998624/87026

Stats

Abstract

Article (PDF)

NANOSECOND YB FIBRE LASER MILLING OF ALLUMINIUM BRONZE: EFFECT OF PROCESS PARAMETERS ON THE SURFACE FINISH

Peter Šugár, Jana Šugárová, Martin Frnčík, Barbora Ludrovcová

Adv. Sci. Technol. Res. J. 2018; 12(3):10–15

DOI: https://doi.org/10.12913/22998624/93613

Stats

Abstract

Article (PDF)

QUANTIFICATION OF ROAD VEHICLE PERFORMANCE PARAMETERS UNDER LABORATORY CONDITIONS

Branislav Šarkan, Ondrej Stopka

Adv. Sci. Technol. Res. J. 2018; 12(3):16–23

DOI: https://doi.org/10.12913/22998624/92107

Stats

Abstract

Article (PDF)

INFLUENCE OF PARAMETERS OF MILLING PROCESS ON THE ENERGY CONSUMPTION OF THE MACHINE TOOL

Wojciech Borkowski, Wacław Skoczyński, Paweł Piórkowski, Tomasz Jankowski, Andrzej Roszkowski, Michał Foremniak

Adv. Sci. Technol. Res. J. 2018; 12(3):24–31

DOI: https://doi.org/10.12913/22998624/93612

Stats

Abstract

Article (PDF)

ANALYSES OF CALCIUM INFLUENCE ON THE AlSi9CuMnNi ALLOY

Nataša Náprstková, Pavel Kraus, Jaromír Cais, Dana Stančeková, Izabela Miturska

Adv. Sci. Technol. Res. J. 2018; 12(3):32–38

DOI: https://doi.org/10.12913/22998624/92101

Stats

Abstract

Article (PDF)

DAILY KILOMETRAGE ANALYSIS FOR SELECTED VEHICLE GROUPS

Dariusz Dobrowolski, Paweł Droździel, Radovan Madleňák, Iwona Katarzyna Rybicka, Dariusz Siłuch

Adv. Sci. Technol. Res. J. 2018; 12(3):39–46

DOI: https://doi.org/10.12913/22998624/92109

Stats

Abstract

Article (PDF)

THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS

Anna Rudawska, Marek Maziarz, Michał Šajgalík, Petr Valášek, Tomas Zlamal, Volodymyr Iasnii

Adv. Sci. Technol. Res. J. 2018; 12(3):47–54

DOI: https://doi.org/10.12913/22998624/92099

Stats

Abstract

Article (PDF)

DRAFT JIG STRUCTURE DESIGN FOR MEASURING DEFORMATION OF THIN-WALLED ROBOTIC OR CONVEYOR COMPONENTS

Peter Michalik, Jozef Zajac, Luboslav Straka, Martin Ambrozy, Lukasz Nowakowski

Adv. Sci. Technol. Res. J. 2018; 12(3):55–60

DOI: https://doi.org/10.12913/22998624/92340

Stats

Abstract

Article (PDF)

ADAPTIVE OPTIMAL CONTROL OF ELECTRIC POWER SYSTEM OPERATION MODE ON THE BASE OF LEAST ACTION PRINCIPLE

Michalina Gryniewicz-Jaworska, Petro D. Lezhniuk, Volodymyr V. Kulyk, Volodymyr V. Netrebskiy, Yevhenii V. Duchkov

Adv. Sci. Technol. Res. J. 2018; 12(3):61–65

DOI: https://doi.org/10.12913/22998624/94922

Stats

Abstract

Article (PDF)

NUMERICAL ANALYSIS OF THE EFFECT OF NONMETALLIC INCLUSIONS LOCATION IN CARBURIZED LAYER OF 16MnCr5 STEEL ON INITIATION OF FATIGUE CRACKING

Sebastian Lipa

Adv. Sci. Technol. Res. J. 2018; 12(3):66–74

DOI: https://doi.org/10.12913/22998624/94943

Stats

Abstract

Article (PDF)

EFFECTS OF FORMING TOOLS AND PROCESS PARAMETERS ON SURFACE ROUGHNESS IN INCREMENTAL SHEET FORMING, A REVIEW

Umair Khalil, Haris Aziz, Mirza Jahanzaib, Wasim Ahmad, Salman Hussain, Faisal Hafeez

Adv. Sci. Technol. Res. J. 2018; 12(3):75–95

DOI: https://doi.org/10.12913/22998624/90223

Stats

Abstract

Article (PDF)

OUT-OF-PLANE STATIC CRUSHING OF THIN-WALLED HONEYCOMB STRUCTURES. NU-MERICAL AND EXPERIMENTAL INVESTIGATION.

Radosław Ciepielewski, Paweł Dybcio, Wiesław Barnat

Adv. Sci. Technol. Res. J. 2018; 12(3):96–105

DOI: https://doi.org/10.12913/22998624/92176

Stats

Abstract

Article (PDF)

A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL

Dana Stančeková, Anna Rudawska, Albert Kulla, Jana Petrů, Jozef Holubják

Adv. Sci. Technol. Res. J. 2018; 12(3):106–113

DOI: https://doi.org/10.12913/22998624/92095

Stats

Abstract

Article (PDF)

NUMERICAL MODELED STATIC STRESS-DEFORMED STATE OF PARALLEL PIPES IN THE DEFORMABLE ENVIRONMENT

Ismoil Ibrohimovich Safarov

Adv. Sci. Technol. Res. J. 2018; 12(3):114–125

DOI: https://doi.org/10.12913/22998624/92177

Stats

Abstract

Article (PDF)

PROPOSAL OF CONTENT MAINTENANCE OF CNC MACHINE USING METHODS RELIABILITY CENTERED MAINTENANCE

Vladimír Stuchlý, Roman Poprocký, Nadežda Čuboňová, Ivan Kuric

Adv. Sci. Technol. Res. J. 2018; 12(3):126–133

DOI: https://doi.org/10.12913/22998624/92094

Stats

Abstract

Article (PDF)

FILMS LDPE/LLDPE MADE FROM POST - CONSUMER PLASTICS: PROCESSING, STRUCTURE, MECHANICAL PROPERTIES

Dorota Czarnecka-Komorowska, Karolina Wiszumirska, Tomasz Garbacz

Adv. Sci. Technol. Res. J. 2018; 12(3):134–142

DOI: https://doi.org/10.12913/22998624/92205

Stats

Abstract

Article (PDF)

OPTIMIZATION OF DOSING TANK EMPTYING USING SPIRAL VIBRATION

David Zurovec, Jan Necas, Jan Diviš, Jakub Hlosta, Jiri Zegzulka, Katerina Urbanova

Adv. Sci. Technol. Res. J. 2018; 12(3):143–149

DOI: https://doi.org/10.12913/22998624/94962

Stats

Abstract

Article (PDF)

NUMERICAL ANALYSIS OF A FORGING PROCESS FOR PRODUCING A HOLLOW BALL FROM TUBE

Grzegorz Samołyk

Adv. Sci. Technol. Res. J. 2018; 12(3):150–157

DOI: https://doi.org/10.12913/22998624/94972

Stats

Abstract

Article (PDF)

USING HYDRODYNAMIC CAVITATION DEVICE IN THE INDUSTRY

Tatiana Vitenko, Paweł Droździel, Anna Rudawska

Adv. Sci. Technol. Res. J. 2018; 12(3):158–167

DOI: https://doi.org/10.12913/22998624/94944

Stats

Abstract

Article (PDF)

FORMING ANALYSIS OF CONTINUOSLY ANNEALED, DOUBLE REDUCED STEEL SHEETS

Emil Spišák, Janka Majerníková, Peter Mulidran, Ľuboš Kaščák, Ján Slota

Adv. Sci. Technol. Res. J. 2018; 12(3):168–172

DOI: https://doi.org/10.12913/22998624/94967

Stats

Abstract

Article (PDF)

OPTIMIZATION OF MANIPULATION LOGISTICS USING DATA MATRIX CODES

Elena Pivarciova, Ladislav Karrach, Zuzana Tučková

Adv. Sci. Technol. Res. J. 2018; 12(3):173–180

DOI: https://doi.org/10.12913/22998624/94961

Stats

Abstract

Article (PDF)

RESEARCH OF COMPOSITE MATERIALS USED IN THE CONSTRUCTION OF VEHICLE BODYWORK

Leszek Gardyński, Jacek Caban, Dalibor Barta

Adv. Sci. Technol. Res. J. 2018; 12(3):181–187

DOI: https://doi.org/10.12913/22998624/92096

Stats

Abstract

Article (PDF)

OBJECTIVE AND SUBJECTIVE EVALUATION OF THE RISK PHYSICAL FACTORS NEAR TO CONVEYOR SYSTEM

Miriama Piňosová, Miriam Andejiová, Pavol Liptai, Ervin Lumnitzer

Adv. Sci. Technol. Res. J. 2018; 12(3):188–196

DOI: https://doi.org/10.12913/22998624/94964

Stats

Abstract

Article (PDF)

CONCEPT OF UNDERGROUND GAS STORAGE IN THE LIMESTONE ROCKS IN SLOVENIA

Željko Vukelić, Milivoj Vulić

Adv. Sci. Technol. Res. J. 2018; 12(3):197–202

DOI: https://doi.org/10.12913/22998624/94977

Stats

Abstract

Article (PDF)

POST-CRITICAL DEFORMATION OF THIN-WALLED LOAD-BEARING AIRCRAFT STRUCTURE REPRESENTING FRAGMENT OF THE ONE-WAY TORSION BOX

Tomasz Kopecki, Tomasz Lis, Przemysław Mazurek

Adv. Sci. Technol. Res. J. 2018; 12(3):203–209

DOI: https://doi.org/10.12913/22998624/94923

Stats

Abstract

Article (PDF)

CONTROL OF MODULAR CONVEYOR AND AUTOMATED HANDLING DEVICES INTERCONNECTION

Vaclav Cempirek, Vladislav Zitricky, Jozef Gasparik, Peter Blaho

Adv. Sci. Technol. Res. J. 2018; 12(3):210–215

DOI: https://doi.org/10.12913/22998624/94963

Stats

Abstract

Article (PDF)

RESEARCH OF POLYMERIC EXTRUDATE WITH SEGMENT-WALL CONSTRUCTION

Isidoro Martinez Mateo, Sebastian Białasz

Adv. Sci. Technol. Res. J. 2018; 12(3):216–222

DOI: https://doi.org/10.12913/22998624/95015

Stats

Abstract

Article (PDF)

DETERMINATION OF DIFFERENT OPTICAL PROPERTIES FOR CUBIC TITANIUM DIOXIDE: AN AB – INITIO APPROACH

Debashish Dash, Chandan Kumar Pandey, Saurabh Chaudhury, Susanta Kumar Tripathy

Adv. Sci. Technol. Res. J. 2018; 12(3):223–232

DOI: https://doi.org/10.12913/22998624/94942

Stats

Abstract

Article (PDF)

GEOMETRIC OPTIMIZATION OF A BEAM DETECTOR FOR A WIM SYSTEM

Aleksander Nieoczym, Kazimierz Drozd, Andrzej Wójcik

Adv. Sci. Technol. Res. J. 2018; 12(3):233–241

DOI: https://doi.org/10.12913/22998624/97296

Stats

Abstract

Article (PDF)

INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS

Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał Szucki, Krzysztof Drozdowski

Adv. Sci. Technol. Res. J. 2018; 12(3):242–249

DOI: https://doi.org/10.12913/22998624/95056

Stats

Abstract

Article (PDF)

THE INFLUENCE OF AUXILARY SUPPLEMENTS ADDED IN THE EXTRUSION PROCESS TO REDUCE THE FRICTION OF A POLYMERIC FOIL

Sebastian Białasz

Adv. Sci. Technol. Res. J. 2018; 12(3):250–256

DOI: https://doi.org/10.12913/22998624/95178

Stats

Abstract

Article (PDF)

ANALYSIS AND ASSESSMENT OF ENERGY EFFICIENCY OF PASSENGER LIFTS

Tomasz Krakowski, Hubert Ruta

Adv. Sci. Technol. Res. J. 2018; 12(3):257–265

DOI: https://doi.org/10.12913/22998624/95165

Stats

Abstract

Article (PDF)

THERMOVISUAL MEASUREMENTS OF 3D PRINTING OF ABS AND PLA FILAMENTS

Łukasz Zgryza, Anna Raczyńska, Magdalena Paśnikowska-Łukaszuk

Adv. Sci. Technol. Res. J. 2018; 12(3):266–271

DOI: https://doi.org/10.12913/22998624/94325

Stats

Abstract

Article (PDF)