Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
| 1 | UVTE MTF, Trnava, Slovak Republic |
| 2 | Kalashnikov Izhevsk State Technical University, 426033 Izhevsk,
Russia |
| 3 | Technical University of Košice, Faculty of Mechanical Engineering,
Letna 9,
Košice, Slovakia |
CORRESPONDING AUTHOR
Publish date: 2017-09-03
Adv. Sci. Technol. Res. J. 2017; 11(3):211–222
KEYWORDS
TOPICS
ABSTRACT
Papers deal with the application of finite-element method (FEM) when investigating the stress-strain state of the workpiece exposed to the gauge burnishing under the conditions of nonzero friction is considered. The burnishing interference (workpiece deformation degree) is the most important factor influencing the strengthening depth. The mathematical model of the workpiece surface-plastic deformation during burnishing, algorithm and computational results of stresses and deformations are given.
Related articles
