PL EN
Mechanical properties analysis of burnished brass
 
More details
Hide details
1
Mechanical Engineering Department, Tafila Technical University, Tafila, Jordan
 
 
Corresponding author
Mayyas Mohammad Al-mahasneh   

Mechanical Engineering Department, Tafila Technical University, Tafila, Jordan
 
 
Adv. Sci. Technol. Res. J. 2025; 19(8)
 
KEYWORDS
TOPICS
ABSTRACT
Brass alloy consists of copper and zinc. It is used as an industrial material because of its hardness and workability, high corrosion resistance, magnetism and good forging ability. This paper evaluates the mechanical properties of brass alloy subjected to cold working which caused plastic straining of the surface of brass specimen resulting from burnishing forces. Forces have a significant role in a burnished surface of brass sample which squeeze it against the samples making plastic twisting of the specimen surface. Burnishing results under variable forces are investigated. The best results of surface roughness have the forces rate of more than 100 N. with a feed rate (0.07 mm/rev).
Journals System - logo
Scroll to top