PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

Autor Radosław Wichniarek

 

Accuracy and Repeatability of Limb Scans Obtained on the Semi-Automatic Measuring Station
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2020; 14(4):220-228
DOI: https://doi.org/10.12913/22998624/127011
 

Rapid Manufacturing of Individualized Prosthetic Sockets
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Magdalena Żukowska, Ewa Suszek
Adv. Sci. Technol. Res. J. 2020; 14(1):42-49
DOI: https://doi.org/10.12913/22998624/113425
 

Prototyping of an Individualized Multi-Material Wrist Orthosis using Fused Deposition Modelling
Filip Górski, Wiesław Kuczko, Weronika Weiss, Radosław Wichniarek, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2019; 13(4):39-47
DOI: https://doi.org/10.12913/22998624/113543
 

Methodology of Low Cost Rapid Manufacturing of Anatomical Models with Material Imitation of Soft Tissues
Magdalena Żukowska, Filip Górski, Radosław Wichniarek, Wiesław Kuczko
Adv. Sci. Technol. Res. J. 2019; 13(4):120-128
DOI: https://doi.org/10.12913/22998624/113426
 

Influence of Sterilization of a Product Manufactured Using FDM Technology on its Dimensional Accuracy
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Jacek Banaszewski
Adv. Sci. Technol. Res. J. 2018; 12(1):74-79
DOI: https://doi.org/10.12913/22998624/80849
 

Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
DOI: https://doi.org/10.12913/22998624/80848
 

Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies
Natalia Wierzbicka, Filip Górski, Radosław Wichniarek, Wiesław Kuczko
Adv. Sci. Technol. Res. J. 2017; 11(3):283-288
DOI: https://doi.org/10.12913/22998624/76070
 

Prototyping of Cosmetic Prosthesis of Upper Limb Using Additive Manufacturing Technologies
Aleksandra Radosh, Wiesław Kuczko, Radosław Wichniarek, Filip Górski
Adv. Sci. Technol. Res. J. 2017; 11(3):102-108
DOI: https://doi.org/10.12913/22998624/70995
 

MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Marta Burdzińska, Michalina Jankowska
Adv. Sci. Technol. Res. J. 2017; 11(2):166-171
DOI: https://doi.org/10.12913/22998624/70997
 

INFLUENCE OF POST-PROCESSING ON ACCURACY OF FDM PRODUCTS
Wiesław Kuczko, Filip Górski, Radosław Wichniarek, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(2):172-179
DOI: https://doi.org/10.12913/22998624/70996
 

INFLUENCE OF MARKER ARRANGEMENT ON POSITIONING ACCURACY OF OBJECTS IN A VIRTUAL ENVIRONMENT
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2015; 9(28):112-119
DOI: https://doi.org/10.12913/22998624/60797
 

APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Paweł Buń, Przemysław Zawadzki
Adv. Sci. Technol. Res. J. 2015; 9(26):20-27
DOI: https://doi.org/10.12913/22998624/2360
 

STRENGTH OF ABS PARTS PRODUCED BY FUSED DEPOSITION MODELLING TECHNOLOGY – A CRITICAL ORIENTATION PROBLEM
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2015; 9(26):12-19
DOI: https://doi.org/10.12913/22998624/2359
 

INFLUENCE OF PROCESS PARAMETERS ON DIMENSIONAL ACCURACY OF PARTS MANUFACTURED USING FUSED DEPOSITION MODELLING TECHNOLOGY
Filip Górski, Wiesław Kuczko, Radosław Wichniarek
Adv. Sci. Technol. Res. J. 2013; 7(19):27-35
DOI: https://doi.org/10.5604/20804075.1062340
 

Geometrical Accuracy and Strength of Micro-Needles Made of Polylactide by Fused Filament Fabrication Method
Radosław Wichniarek, Wiesław Kuczko, Dorota Tomczak, Ariadna Nowicka, Monika Wojtyłko, Anna Froelich, Tomasz Osmałek
Adv. Sci. Technol. Res. J. 2023; 17(6):116-126
DOI: https://doi.org/10.12913/22998624/174079
 

Constraint Programming for Flexible Flow Shop Scheduling Problem with Repeated Jobs and Repeated Operations
Kateryna Czerniachowska, Radosław Wichniarek, Krzysztof Żywicki
Adv. Sci. Technol. Res. J. 2023; 17(3):280-293
DOI: https://doi.org/10.12913/22998624/166588
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top