Articles by Piotr Gąska
 

DETERMINATION OF CALIBRATION SPHERE PARAMETERS INFLUENCE ON THE RESULTS OF ARTICULATING PROBE HEAD QUALIFICATION
Maciej Gruza, Adam Gąska, Piotr Gąska, Wiktor Harmatys, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2018; 12(2)
Stats
Abstract
 

Analysis of Measured Workpiece's Form Errors Influence on the Accuracy of Probe Heads Used on Five-Axis Measuring Systems
Wiktor Harmatys, Adam Gąska, Maciej Gruza, Piotr Gąska, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2017; 11(4):305–310
DOI: https://doi.org/10.12913/22998624/80893
Stats
Abstract
Article (PDF)
 

Assessment of the Impact of Probe Head Hysteresis on the Accuracy of Five-Axis Coordinate Measuring Systems
Piotr Gąska, Maciej Gruza, Adam Gąska, Wiktor Harmatys, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2017; 11(3):277–282
DOI: https://doi.org/10.12913/22998624/76066
Stats
Abstract
Article (PDF)
 

DETERMINATION OF TEMPERATURE IMPACT ON CMM RESIDUAL KINEMATIC ERRORS DISTRIBUTION
Wiktor Harmatys, Piotr Gąska, Adam Gąska, Maciej Gruza, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2015; 9(26):113–117
DOI: https://doi.org/10.12913/22998624/2374
Stats
Abstract
Article (PDF)
 

ANALYSIS OF Z-AXIS KINEMATICS INFLUENCE ON MEASUREMENT RESULT
Maciej Gruza, Wiktor Harmatys, Piotr Gąska, Adam Gąska, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2015; 9(26):109–112
DOI: https://doi.org/10.12913/22998624/2373
Stats
Abstract
Article (PDF)
 

IDENTIFICATION AND CORRECTION OF COORDINATE MEASURING MACHINE GEOMETRICAL ERRORS USING LASERTRACER SYSTEMS
Adam Gąska, Maciej Gruza, Piotr Gąska, Michał Karpiuk, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2013; 7(20):17–22
DOI: https://doi.org/10.5604/20804075.1073047
Stats
Abstract
Article (PDF)
 
Most read
Indexes
 
Keywords index
Authors index
Copyright © 2006-2018 Bentus All rights reserved.