PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access
Author Jerzy Józwik
 

Cutting Forces and 3D Surface Analysis of CFRP Milling
Katarzyna Biruk-Urban, Jerzy Józwik, Paul Bere
Adv. Sci. Technol. Res. J. 2022; 16(2):206–215
DOI: https://doi.org/10.12913/22998624/147338
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131–140
DOI: https://doi.org/10.12913/22998624/146765
 

Effect of Face Milling Parameters of Carbon Fiber Reinforced Plastics Composites on Surface Properties
Izabela Miturska-Barańska, Jerzy Józwik, Paul Bere
Adv. Sci. Technol. Res. J. 2022; 16(2):26–38
DOI: https://doi.org/10.12913/22998624/146376
 

Digital Shape and Geometric Dimension Analysis of Polymer Fuel Tanks
Jerzy Józwik, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2021; 15(4):38–48
DOI: https://doi.org/10.12913/22998624/141649
 

Wear Characteristics of Hardfacing Coatings Obtained by Tungsten Inert Gas Method
Krzysztof Dziedzic, Jerzy Józwik, Marcin Barszcz, Konrad Gauda
Adv. Sci. Technol. Res. J. 2019; 13(4):8–14
DOI: https://doi.org/10.12913/22998624/112405
 

Advanced Time-Frequency Representation in Voice Signal Analysis
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2018; 12(1):251–259
DOI: https://doi.org/10.12913/22998624/87028
 

Structure and Construction Assessment of the Surface Layer of Hardfaced Coating after Friction
Krzysztof Dziedzic, Mykhaylo Pashechko, Marcin Barszcz, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2017; 11(3):253–260
DOI: https://doi.org/10.12913/22998624/76583
 

INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511
Jerzy Józwik, Dawid Ostrowski, Paweł Jarosz, Dariusz Mika
Adv. Sci. Technol. Res. J. 2016; 10(32):86–96
DOI: https://doi.org/10.12913/22998624/65136
 

RESEARCH ON TRIBOLOGICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS
Krzysztof Dziedzic, Joanna Zubrzycka-Wróbel, Jerzy Józwik, Marcin Barszcz, Piotr Siwak, Renata Chałas
Adv. Sci. Technol. Res. J. 2016; 10(32):144–149
DOI: https://doi.org/10.12913/22998624/65123
 

NORMATIVE MEASUREMENTS OF NOISE AT CNC MACHINES WORK STATIONS
Dariusz Mika, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2016; 10(30):138–143
DOI: https://doi.org/10.12913/22998624/63387
 

IDENTIFICATION AND MONITORING OF NOISE SOURCES OF CNC MACHINE TOOLS BY ACOUSTIC HOLOGRAPHY METHODS
Jerzy Józwik
Adv. Sci. Technol. Res. J. 2016; 10(30):127–137
DOI: https://doi.org/10.12913/22998624/63386
 

THE INFLUENCE OF THE CONDITIONS OF EMULSION MIST FORMATION ON THE SURFACE ROUGHNESS OF AISI 1045 STEEL AFTER FINISH TURNING
Eugene Feldshtein, Jerzy Józwik, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2016; 10(30):144–149
DOI: https://doi.org/10.12913/22998624/62773
 

SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING
Patrycja Ruszniak, Jerzy Józwik, Dawid Ostrowski, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2017; 11(1):128–137
DOI: https://doi.org/10.12913/22998624/68405
 

DIAGNOSTIC OF CNC LATHE WITH QC 20 BALLBAR SYSTEM
Jerzy Józwik, Leszek Semotiuk, Ivan Kuric
Adv. Sci. Technol. Res. J. 2015; 9(28):96–102
DOI: https://doi.org/10.12913/22998624/60793
 

ANGULAR POSITIONING ACCURACY OF ROTARY TABLE AND REPEATABILITY OF FIVE-AXIS MACHINING CENTRE DMU 65 MONOBLOCK
Jerzy Józwik, Marek Czwarnowski
Adv. Sci. Technol. Res. J. 2015; 9(28):89–95
DOI: https://doi.org/10.12913/22998624/60792
 

DIAGNOSTICS OF WORKPIECE SURFACE CONDITION BASED ON CUTTING TOOL VIBRATIONS DURING MACHINING
Jerzy Józwik, Dariusz Mika
Adv. Sci. Technol. Res. J. 2015; 9(26):57–65
DOI: https://doi.org/10.12913/22998624/2365
 

ANALYSIS OF THE SURFACE PROFILE AND ITS MATERIAL SHARE DURING THE GRINDING INCONEL 718 ALLOY
Martin Novák, Nataša Náprstková, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2015; 9(26):41–48
DOI: https://doi.org/10.12913/22998624/2363
 

INVESTIGATION AND ASSESSMENT OF OCCUPATIONAL RISK ON THE METAL CUTTING MACHINE TOOL STAN
Jerzy Józwik, Paweł Pietras
Adv. Sci. Technol. Res. J. 2013; 7(20):47–54
DOI: https://doi.org/10.5604/20804075.1073057
 

MEASUREMENT UNCERTAINTY ANALYSIS OF DIFFERENT CNC MACHINE TOOLS MEASUREMENT SYSTEMS
Leszek Semotiuk, Jerzy Józwik, Kuric Ivan
Adv. Sci. Technol. Res. J. 2013; 7(19):41–47
DOI: https://doi.org/10.5604/20804075.1062356
 

Surface Texturing on a CNC Machine Tool Using a Laser
Jerzy Józwik, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2023; 17(1):160–172
DOI: https://doi.org/10.12913/22998624/157422
 

Microbiological Analysis of Coolant Used in Machining
Jerzy Józwik, Magdalena Michałowska, Grzegorz Budzik, Stanisław Legutko, Maciej Kupczyk
Adv. Sci. Technol. Res. J. 2023; 17(2):206–214
DOI: https://doi.org/10.12913/22998624/157421
 

Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Adv. Sci. Technol. Res. J. 2023; 17(1):35–45
DOI: https://doi.org/10.12913/22998624/157393
 

Application of Plasma Actuator with Two Mesh Electrodes to Active Control of Boundary Layer at 50 Hz Power Supply
Ernest Gnapowski, Jarosław Pytka, Sebastian Gnapowski, Jerzy Józwik, Paweł Tomiło
Adv. Sci. Technol. Res. J. 2023; 17(1):58–63
DOI: https://doi.org/10.12913/22998624/157207
 

Dynamic Analysis of the Starting and Braking of the Table of CNC Machine Tool
Jerzy Józwik, Magdalena Zawada-Michałowska, Damian Moń
Adv. Sci. Technol. Res. J. 2022; 16(3):34–46
DOI: https://doi.org/10.12913/22998624/147757
 
Most read
Indexes
 
Keywords index
Authors index
© 2006-2023 Journal hosting platform by Bentus