All issues
Volume 19, Issue 10, 2025
IN PROGRESS
Post-failure topographical assessment of carbon fiber reinforced polymer – reinforced S235R steel under tensile loading
Adv. Sci. Technol. Res. J. 2025; 19(10):1-14
Methods of increasing volumetric specific impulse in HTPB based hybrid rocket motors
Adv. Sci. Technol. Res. J. 2025; 19(10):15-24
Analysis of mechanical properties material during the process alternate pressing and multiaxial compression
Adv. Sci. Technol. Res. J. 2025; 19(10):25-41
Density distribution in magnetorheological fluid subjected to external forces
Adv. Sci. Technol. Res. J. 2025; 19(10):42-54
Mechanical properties of body centered cubic based lattice structures with varying aspect ratio in the loading direction
Adv. Sci. Technol. Res. J. 2025; 19(10):55-64
Evaluation of the force meter accuracy in the engineering industry applications
Adv. Sci. Technol. Res. J. 2025; 19(10):65-79
Numerical procedure for investigating the water-added mass effect on the vibroacoustic characteristics of a cylindrical container
Adv. Sci. Technol. Res. J. 2025; 19(10):80-93
Specific cutting force in dry turning of Ti6Al4V ELI using different grades of carbide inserts
Adv. Sci. Technol. Res. J. 2025; 19(10):94-105
Hydrogen with compressed natural gas in 1-cylinder diesel engine – Emission analysis
Adv. Sci. Technol. Res. J. 2025; 19(10):106-122
Comparison of machine learning models for predicting the compressive strength of cement mixtures with zeolite
Adv. Sci. Technol. Res. J. 2025; 19(10):123-135
Modeling and analysis of fiber laser cutting conditions on the surface quality of stainless steel 201
Adv. Sci. Technol. Res. J. 2025; 19(10):136-149
Comparing adding Co3O4 and Fe3O4 nanoparticles to improve the performance and emission of biodiesel fuel prepared from waste oils in diesel engines
Adv. Sci. Technol. Res. J. 2025; 19(10):150-161
Friction stir welding AA6061-T6 with multi-objective optimization of parameters
Adv. Sci. Technol. Res. J. 2025; 19(10):162-172
A study on the electric energy consumption of a lightweight four-wheeled vehicle powered by the hub-mounted brushless direct-current hub motors designed for disabled people
Adv. Sci. Technol. Res. J. 2025; 19(10):173-187
High temperature properties of Inconel 718 parts arc-welded with tungsten electrode
Adv. Sci. Technol. Res. J. 2025; 19(10):188-198
Comparison of methods of topological optimization of a selected module of a mobile working machine and assessment of the possibilities of production by additive technology
Adv. Sci. Technol. Res. J. 2025; 19(10):199-211
Modeling the impact of hydroprocessed ester and fatty acids - synthetic paraffinic kerosene fuel properties and engine performance on emission characteristics and particle size distribution
Adv. Sci. Technol. Res. J. 2025; 19(10):212-222
Influence of machining conditions on the surface quality after circumferential milling of carbon fiber reinforced aluminum laminate
Adv. Sci. Technol. Res. J. 2025; 19(10):223-237
Regression analysis of the vibroarthrogram in the external load conditions
Adam Łysiak, Dawid Bączkowicz, Dorota Borzucka, Mirosław Szmajda, Aleksandra Kawala-Sterniuk, Sebastian Brol, Michał Dołęgowski, Janusz Mroczka
Adv. Sci. Technol. Res. J. 2025; 19(10):238-251
Nonlinear free vibration analysis of skew functionally graded plate using novel shear deformation theory
Adv. Sci. Technol. Res. J. 2025; 19(10):252-264
Analysis of roundness profile of powder bed fusion additively manufactured samples using hybrid wavelet-Fourier method
Adv. Sci. Technol. Res. J. 2025; 19(10):265-277
Effect of fenugreek extract on corrosion resistance of steels
Małgorzata Anna Ciosmak, Alexey Bohomolov, Olga Syza, Oleksandr Korolyov, Elena Bondar, Taras Shchur
Adv. Sci. Technol. Res. J. 2025; 19(10):291-299
Sheet metal quality measurement using laser speckle method
Adv. Sci. Technol. Res. J. 2025; 19(10):300-314
Assessment of the level of innovation of a metal industry company using the life cycle assessment and technology readiness level
Adv. Sci. Technol. Res. J. 2025; 19(10):315-328
Mobile ultrasound-impedance tomograph for long-term monitoring of the lower urinary tract: Optimization of miniaturization and electromagnetic compatibility
Tomasz Rymarczyk, Michał Gołąbek, Grzegorz Kłosowski, Józef Stokłosa, Mariusz Kalita, Edward Kozłowski
Adv. Sci. Technol. Res. J. 2025; 19(10):329-346
Comprehensive study of the distribution of metals during the smelting of copper-containing raw materials in the Vanyukov furnace at the Balkhash copper smelter
Adv. Sci. Technol. Res. J. 2025; 19(10):347-358
Designing an underwater towed vehicle using numerical methods
Adv. Sci. Technol. Res. J. 2025; 19(10):359-370
Mechanical behavior of 3D printed polymers under tensile and bending loads
Alberto Saldaña-Robles, Alexis Sánchez-Angeles, Antonio de J. Balvantín-García, Diego A. Núñez-Altamirano, Gustavo Capilla-González
Adv. Sci. Technol. Res. J. 2025; 19(10):371-384
Predictive modeling and decision support using machine learning in business contexts
Adv. Sci. Technol. Res. J. 2025; 19(10):385-395
Influence of graphene nanoplatelets on the interfacial bonding and mechanical performance of flax/epoxy composites
Khaled Y. Eayal Awwad, Rasheed Abdullah, Mohammad Ahmad Alhawamdeh, Raed Al-Rbaihat, Sameh Alsaqoor, Nabeel Alshabatat
Adv. Sci. Technol. Res. J. 2025; 19(10):396-411
Microbial air contamination inside academic buildings in Białystok University of Technology
Adv. Sci. Technol. Res. J. 2025; 19(10):412-421
Numerical analysis of the influence of the vertical position of tubes in latent heat thermal storage on the charging and discharging processes
Adv. Sci. Technol. Res. J. 2025; 19(10):422-435
Error metrics in modelling and optimization of the straight-core lossy mode resonance-based sensors
Adv. Sci. Technol. Res. J. 2025; 19(10):436-443
Adaptive robust iterative backstepping control for pump-driven electro-hydraulic rotary actuator
Adv. Sci. Technol. Res. J. 2025; 19(10):444-460
Using artificial intelligence to optimize gcode files for fused filament fabrication/ fused deposition modeling technology
Adv. Sci. Technol. Res. J. 2025; 19(10):461-474
Most read
- Month
- Year
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
