PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

Słowo kluczowe magnesium alloys

 

Chip Temperature Measurement in the Cutting Area During Rough Milling Magnesium Alloys with a Kordell Geometry End Mill
Józef Kuczmaszewski, Ireneusz Zagórski, Piotr Zgórniak
Adv. Sci. Technol. Res. J. 2022; 16(2):109-119
DOI: https://doi.org/10.12913/22998624/146851
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131-140
DOI: https://doi.org/10.12913/22998624/146765
 

Surface Quality in Milling of AZ91D Magnesium Alloy
Ireneusz Zagórski, Jarosław Korpysa
Adv. Sci. Technol. Res. J. 2019; 13(2):119-129
DOI: https://doi.org/10.12913/22998624/108547
 

Artificial Neural Network Modelling of Vibration in the Milling of AZ91D Alloy
Ireneusz Zagórski, Monika Kulisz, Aleksandra Semeniuk, Anna Malec
Adv. Sci. Technol. Res. J. 2017; 11(3):261-269
DOI: https://doi.org/10.12913/22998624/76546
 

STUDY OF CHIP IGNITION AND CHIP MORPHOLOGY AFTER MILLING OF MAGNESIUM ALLOYS
Ireneusz Zagórski, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2016; 10(32):101-108
DOI: https://doi.org/10.12913/22998624/65130
 

IMPACT OF DEPTH OF CUT ON CHIP FORMATION IN AZ91HP MAGNESIUM ALLOY MILLING WITH TOOLS OF VARYING CUTTING EDGE GEOMETRY
Olga Gziut, Józef Kuczmaszewski, Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2015; 9(26):49-56
DOI: https://doi.org/10.12913/22998624/2364
 

THE STUDY OF CUTTING FORCES AND THEIR AMPLITUDES DURING HIGH-SPEED DRY MILLING MAGNESIUM ALLOYS
Ireneusz Zagórski, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2013; 7(20):61-66
DOI: https://doi.org/10.5604/20804075.1073060
 

Review of Magnesium Alloys Used in the Manufacture of Wheels for Light Vehicles
Ewa Siemionek, Krzysztof Majerski, Piotr Surdacki, Ema Novakova-Marcincinova
Adv. Sci. Technol. Res. J. 2023; 17(6):245-253
DOI: https://doi.org/10.12913/22998624/174686
 

Safety in Rough Milling of Magnesium Alloys Using Tools with Variable Cutting Edge Geometry
Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2023; 17(2):181-191
DOI: https://doi.org/10.12913/22998624/159637
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top