PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 18, 1, 2024
 
 

Investigations of the Effect of Heat Treatment and Plastic Deformation Parameters on the Formability and Microstructure of AZ91 Alloy Castings
Krzysztof Majerski, Ewa Siemionek, Michał Szucki, Piotr Surdacki
Adv. Sci. Technol. Res. J. 2024; 18(1):1-9
DOI: https://doi.org/10.12913/22998624/174932
 

Effect of Friction on Buckling Behavior in Shallow Spherical to Hemispherical Shells in Contact with Rigid Boundaries under Uniform External Pressure
Xuan Cuong Nguyen, Yoshio Arai, Wakako Araki
Adv. Sci. Technol. Res. J. 2024; 18(1):10-25
DOI: https://doi.org/10.12913/22998624/175377
 

Evaluation of Structural Powder Steel Properties after High-Temperature Thermomechanical Treatment and Finish Turning
Kamil Leksycki, Eugene Feldshtein, Radosław Maruda, Larisa Dyachkova, Natalia Szczotkarz, Alexandra Zverko
Adv. Sci. Technol. Res. J. 2024; 18(1):26-35
DOI: https://doi.org/10.12913/22998624/175676
 

Acoustic-Based Drone Detection Using Neural Networks – A Comprehensive Analysis
Waldemar Paszkowski, Arkadiusz Gola, Antoni Świć
Adv. Sci. Technol. Res. J. 2024; 18(1):36-47
DOI: https://doi.org/10.12913/22998624/175863
 

Abrasion Resistance of Nickel- and Iron-base Hardfacings
Tadeusz Hejwowski, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2024; 18(1):48-60
DOI: https://doi.org/10.12913/22998624/175969
 

Computational Methods of the Identification of Chaboche Isotropic-Kinematic Hardening Model Parameters Derived from the Cyclic Loading Tests
Marta Wójcik, Andrzej Gontarz, Andrzej Skrzat, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2024; 18(1):61-75
DOI: https://doi.org/10.12913/22998624/175930
 

Influence of Aluminium Oxide Nanoparticles Mass Concentrations on the Tool Wear Values During Turning of Titanium Alloy Under Minimum Quantity Lubrication Conditions
Natalia Szczotkarz, Krzysztof Adamczuk, Daniel Dębowski, Munish Kumar Gupta
Adv. Sci. Technol. Res. J. 2024; 18(1):76-88
DOI: https://doi.org/10.12913/22998624/175917
 

Implementation of PID Autotuning Procedure Based on Doublet-Pulse Method in PLC Controller
Michał Awtoniuk, Robert Sałat, Miłosz Worwa, Volodymyr Reshetiuk
Adv. Sci. Technol. Res. J. 2024; 18(1):89-97
DOI: https://doi.org/10.12913/22998624/176832
 

Additive and Subtractive Manufacturing of Inconel 718 Components - Estimation of Time, Costs and Carbon Dioxide Emission – Case Study
Wojciech Zębala, Anna Gaweł
Adv. Sci. Technol. Res. J. 2024; 18(1):98-109
DOI: https://doi.org/10.12913/22998624/176824
 

Effect of Cutting-Edge Geometry on the Machinability of 316L Austenitic Steel
Marcin Grabowski, Marcin Małek, Reza Teimouri, Sebastian Skoczypiec
Adv. Sci. Technol. Res. J. 2024; 18(1):110-117
DOI: https://doi.org/10.12913/22998624/177031
 

Influence of the Extrusion Cavity Shape on the Ultimate Extrusion Force Value During Pellet Extrusion Through Multiple-Cavity Dies
Jan Górecki, Wiktor Łykowski, Maria Gumeni
Adv. Sci. Technol. Res. J. 2024; 18(1):118-128
DOI: https://doi.org/10.12913/22998624/177029
 

Accelerations Caused by Underwater Explosions on the Naval Gun Foundation
Bogdan Szturomski, Radosław Kiciński, Stanisław Milewski
Adv. Sci. Technol. Res. J. 2024; 18(1):129-141
DOI: https://doi.org/10.12913/22998624/174846
 

Research on the Distribution of Axial Excitation of Positive Pressure Ventilators in the Aspect of Stability Safety of the Load-Bearing Frame
Bartosz Wieczorek, Piotr Kaczmarzyk, Łukasz Warguła, Marcin Giedrowicz, Damian Bąk, Łukasz Gierz, Grigor Stambolov, Boris Kostov
Adv. Sci. Technol. Res. J. 2024; 18(1):142-154
DOI: https://doi.org/10.12913/22998624/174845
 

Performance and Emission of the Aircraft with Hybrid Propulsion During Take-Off Operation Cycle
Małgorzata Pawlak, Michał Kuźniar
Adv. Sci. Technol. Res. J. 2024; 18(1):155-166
DOI: https://doi.org/10.12913/22998624/177254
 

Microstructure, Mechanical Properties, and Heat Distribution ANSYS model of CP Copper and 316 Stainless Steel Torch Brazing
Auday Awad Abtan, Mohammed S. Mohammed, Iqbal Alshalal
Adv. Sci. Technol. Res. J. 2024; 18(1):167-183
DOI: https://doi.org/10.12913/22998624/177299
 

Surface Roughness Prediction in the Hardened Steel Ball-End Milling by Using the Artificial Neural Networks and Taguchi Method
Andrzej Matras
Adv. Sci. Technol. Res. J. 2024; 18(1):184-194
DOI: https://doi.org/10.12913/22998624/177328
 

The Influence of Printing Parameters on Leakage and Strength of Fused Deposition Modelling 3D Printed Parts
Marcin Szczęch, Wojciech Sikora
Adv. Sci. Technol. Res. J. 2024; 18(1):195-201
DOI: https://doi.org/10.12913/22998624/178330
 

Evaluation of Machinability Indicators in Milling of Thin-Walled Composite Structures
Krzysztof Ciecieląg
Adv. Sci. Technol. Res. J. 2024; 18(1):202-212
DOI: https://doi.org/10.12913/22998624/177362
 

Autonomous Mobile Robots in Automotive Remanufacturing: A Case Study for Intra-Logistics Support
Jakub Pizoń, Łukasz Wójcik, Arkadiusz Gola, Łukasz Kański, Izabela Nielsen
Adv. Sci. Technol. Res. J. 2024; 18(1):213-230
DOI: https://doi.org/10.12913/22998624/177398
 

Prediction of Buckling Behaviour of Composite Plate Element Using Artificial Neural Networks
Katarzyna Falkowicz, Monika Kulisz
Adv. Sci. Technol. Res. J. 2024; 18(1):231-243
DOI: https://doi.org/10.12913/22998624/177399
 

Design and Implementation of a Versatile Flexible 3D Wire Bending Machine with Accuracy Algorithm
Mohammed O. Farhan, Mohanned M.H. AL-Khafaji, Muhannad Q. Abood
Adv. Sci. Technol. Res. J. 2024; 18(1):244-254
DOI: https://doi.org/10.12913/22998624/180310
 

Improves the Brake Working of the Rescue Winch to Control the Stop Brake Process
Truong Giang Duong, Van Tinh Nguyen
Adv. Sci. Technol. Res. J. 2024; 18(1):255-267
DOI: https://doi.org/10.12913/22998624/177662
 

Influence of Different Polishing Methods on Surface Roughness and Microhardness of Dental Composites
Żaneta Anna Mierzejewska, Kamila Łukaszuk, Magdalena Choromańska, Anna Zalewska, Jan Borys, Bożena Antonowicz, Ewa Kulesza
Adv. Sci. Technol. Res. J. 2024; 18(1):268-279
DOI: https://doi.org/10.12913/22998624/178515
 

Performance of a Cam-Type Pulse Continuously Variable Transmission
Stanisław Pabiszczak
Adv. Sci. Technol. Res. J. 2024; 18(1):280-290
DOI: https://doi.org/10.12913/22998624/178176
 

The Effect of Re Content on Microstructure and Creep Resistance of Single Crystal Castings Made of Nickel-Based Superalloys
Kamil Gancarczyk, Robert Albrecht, Małgorzata Kawalec, Barbara Kościelniak, Andrzej Gradzik, Dariusz Szeliga, Andrzej Kawalec, Waldemar Ziaja, Maciej Motyka
Adv. Sci. Technol. Res. J. 2024; 18(1):291-305
DOI: https://doi.org/10.12913/22998624/178463
 

Innovative Design and Machining Verification of a Dual Axis Swivel Table for a Milling Machine
Wei-Zhu Lin, Jian-Xuan Xiao, Yung-Chih Lin, Bo-Wei Chang, Jui-Pin Hung
Adv. Sci. Technol. Res. J. 2024; 18(1):306-319
DOI: https://doi.org/10.12913/22998624/178528
 

The Influence of the Hot Working Tool Steel Substrate Material on the Element Distribution, Microstructure and Hardness of Gas Metal Arc Welding Hardfaced Layers
Marzena M. Lachowicz, Paweł Sokołowski, Marcin Kaszuba
Adv. Sci. Technol. Res. J. 2024; 18(1):320-333
DOI: https://doi.org/10.12913/22998624/181188
 

Assessment of Nonhomogeneous Structures in Steel Contents in Terms of Fatigue Resistance Using Analytical Hierarchy Process
Ali Al-Maliki, Jasim H. Al-Bedhany, Tahseen Ali Mankhi, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2024; 18(1):334-348
DOI: https://doi.org/10.12913/22998624/182286
 

Optimizing Fused Deposition Modelling Process Parameters for Medical Grade Polymethylmethacrylate Flexural Strength
Nareen Hafidh Obaeed, Wisam Hamdan
Adv. Sci. Technol. Res. J. 2024; 18(1):349-359
DOI: https://doi.org/10.12913/22998624/182876
 

Evaluation of the Efficacy of Effective Microorganisms in the Reclamation of Degraded Soils
Grażyna Żukowska, Magdalena Myszura-Dymek, Zofia Durczyńska, Marta Bik-Małodzińśka, Szymon Roszkowski
Adv. Sci. Technol. Res. J. 2024; 18(1):360-369
DOI: https://doi.org/10.12913/22998624/182983
 

Selected Methods of Modifying the Surface Layer of a Carbon Composite
Mariusz Kłonica, Andrzej Kubit, Ryszard Perłowski, Radosław Bielawski, Sławomir Woś
Adv. Sci. Technol. Res. J. 2024; 18(1):270-277
DOI: https://doi.org/10.12913/22998624/183101
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top