Device Designed for Detection and Setting the Required Tensile Force in Ropes
 
More details
Hide details
1
Technical University of Ostrava, Ostrava-Poruba, Czech Republic
2
Faculty of Technical Sciences, University of Novi Sad, Dr Zorana Đinđića 1, 21101 Novi Sad, Republic of Serbia
Publish date: 2018-03-01
 
Adv. Sci. Technol. Res. J. 2018; 12(1):200–206
KEYWORDS:
TOPICS:
ABSTRACT:
The contribution deals with a device, which allows recording values of tensile forces acting on steel ropes. At the same time, this device allows setting of the same values of tensile forces in carrier ropes within multi-rope systems, which are initially unevenly subjected to tension by the action of the weight suspended on these ropes. In the contribution, two principles of devices for setting the required value of tensile force in ropes are mentioned and subjected to the analysis of practical applicability. The paper describes in detail the design and principle of operation of the mechanical device for setting the required value of tensile force in ropes, which uses screw drive and tensile force sensor.
CORRESPONDING AUTHOR:
Leopold Hrabovský   
Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic