PL EN
THE INFLUENCE OF CURRANT MMA WELDING ON THE TENSILE STRENGHT OF JOINT
 
More details
Hide details
1
Institute of Technical Sciences and Aviation, The State School of Higher Education in Chełm, Pocztowa 54, 22-100 Chełm, Poland
 
 
Publication date: 2014-03-05
 
 
Adv. Sci. Technol. Res. J. 2014; 8(21):43-48
 
KEYWORDS
ABSTRACT
Welding with coated electrodes is still growing method of joining metals in construction machinery. If the electrodes are properly selected and current welding can weld materials in a wide range of geometric dimensions and species. With carefully selected ingredients one can introduce additional elements to the welded material and the joint during welding. An important issue in the electric welding is a welding current selection, depending on the thickness of the electrode and material thickness. The use of too low operating current cause instability and inadequate mechanical properties of the weld, resulting from insufficient melting of the material combined. Too high operating current results in the weld metal spraying and thermal overload of the electrode. For welding samples that were used to test the strength of the electrode used ESAB OK. 46.00 a diameter of 3.2 mm. Product of the company will provide a range of welding current ranging from 80 A to 150 A. The samples were welded currents amounting to 90 A, 115 A and 150 A. Due to problems with arc ignition and its instability is not made ​​of welded samples current of 80 A.
Journals System - logo
Scroll to top