PL EN
An Integrated Desulfation-Defluorination-Solvent Extraction Process for Purifying Wet-Process Phosphoric Acid from High-Carbonate Kyzylkum Phosphorites
 
More details
Hide details
1
Institute of General and Inorganic Chemistry, Academy of Sciences of the Republic of Uzbekistan
 
2
Karakalpak Branch of the Academy of Sciences of the Republic of Uzbekistan
 
3
The International Institute of Food Technology and Engineering
 
 
Corresponding author
Ilkhom Khoshimov   

The International Institute of Food Technology and Engineering
 
 
 
KEYWORDS
TOPICS
ABSTRACT
Wet-process phosphoric acid (WPA) produced from high-carbonate Kyzylkum phosphorites contains sulfate, fluorine and metallic impurities that restrict its use in high-purity phosphate products. This study aimed to develop and quantitatively evaluate an integrated purification process that combines desulfation with strontium carbonate (SrCO3), evaporation, defluorination with microsilica and liquid-liquid extraction with tributyl phosphate (TBP) diluted with kerosene (1:1 by mass). At the stoichiometric SrCO3 dosage, 97.34% of SO3 was removed, and the strontium sulfate precipitate was converted back to SrCO3 with K2CO3 at a conversion degree of 97%. After evaporation to 55 wt.% P2O5, microsilica added at 110% of the stoichiometric requirement reduced the fluorine content to 0.101 wt.% (94.64% defluorination). An aqueous-to-organic volume ratio of 1:5 gave the best compromise between impurity removal and product concentration: Fe2O3 and Al2O3 were below the detection limit, and the MgO-to-P2O5 and CaO-to-P2O5 ratios of the purified acid were approximately 90% and 51-53% lower, respectively, than those of the initial WPA. The P2O5 extraction efficiency, stripping efficiency and overall recovery were 83.60%, 99.86% and 81.87%, respectively. X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy showed that the separated metals accumulated in partly amorphous, phosphate-rich precipitates containing Fe, Al, Ca and Mg. The integrated process achieved a P2O5 extraction efficiency comparable to that of reported TBP systems while additionally providing deep desulfation, defluorination and reagent regeneration within one compatible operating window.
Journals System - logo
Scroll to top