PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

Słowo kluczowe 3D printing

 

Procedural Analysis of the Parameters of 3D Printing Technology in the Process of Manufacturing Objects for Visually Impaired People
Jerzy Montusiewicz, Marcin Barszcz, Sylwester Tomasz Korga
Adv. Sci. Technol. Res. J. 2022; 16(5):299-311
DOI: https://doi.org/10.12913/22998624/155186
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Jarosław Zubrzycki, Quirino Estrada, Michał Staniszewski, Magdalena Marchewka
Adv. Sci. Technol. Res. J. 2022; 16(5):52-63
DOI: https://doi.org/10.12913/22998624/154024
 

The Method of Decomposition of Architectural Objects for the preparation of 3D Virtual Models and Replication
Jerzy Montusiewicz, Marcin Barszcz, Krzysztof Dziedzic, Tomasz Nowicki
Adv. Sci. Technol. Res. J. 2021; 15(2):247-257
DOI: https://doi.org/10.12913/22998624/136396
 

Use of 3D Parametric Models in the Automotive Component Design Process
Michal Fabian, František Kupec
Adv. Sci. Technol. Res. J. 2021; 15(1):255-264
DOI: https://doi.org/10.12913/22998624/132589
 

Modern Reverse Engineering Methods Used to Modification of Jewelry
Arkadiusz Kroma, Oliwia Adamczak, Robert Sika, Filip Górski, Wiesław Kuczko, Krzysztof Grześkowiak
Adv. Sci. Technol. Res. J. 2020; 14(4):298-306
DOI: https://doi.org/10.12913/22998624/128006
 

Rapid Manufacturing of Individualized Prosthetic Sockets
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Magdalena Żukowska, Ewa Suszek
Adv. Sci. Technol. Res. J. 2020; 14(1):42-49
DOI: https://doi.org/10.12913/22998624/113425
 

Prototyping of an Individualized Multi-Material Wrist Orthosis using Fused Deposition Modelling
Filip Górski, Wiesław Kuczko, Weronika Weiss, Radosław Wichniarek, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2019; 13(4):39-47
DOI: https://doi.org/10.12913/22998624/113543
 

Methodology of Low Cost Rapid Manufacturing of Anatomical Models with Material Imitation of Soft Tissues
Magdalena Żukowska, Filip Górski, Radosław Wichniarek, Wiesław Kuczko
Adv. Sci. Technol. Res. J. 2019; 13(4):120-128
DOI: https://doi.org/10.12913/22998624/113426
 

Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
DOI: https://doi.org/10.12913/22998624/80848
 

SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING
Patrycja Ruszniak, Jerzy Józwik, Dawid Ostrowski, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2017; 11(1):128-137
DOI: https://doi.org/10.12913/22998624/68405
 

The Influence of Printing Parameters on Leakage and Strength of Fused Deposition Modelling 3D Printed Parts
Marcin Szczęch, Wojciech Sikora
Adv. Sci. Technol. Res. J. 2024; 18(1):195-201
DOI: https://doi.org/10.12913/22998624/178330
 

Measurements of Tensile Strength and Elongation of 3D Printed Polylactide Solids Produced with Different Temperatures of Extruder Using Coordinate Measuring Technique and Finite Element Method
Anna Magdalena Gaweł, Ksenia Ostrowska, Aleksandra Lisowska
Adv. Sci. Technol. Res. J. 2023; 17(6):356-366
DOI: https://doi.org/10.12913/22998624/174907
 

Geometrical Accuracy and Strength of Micro-Needles Made of Polylactide by Fused Filament Fabrication Method
Radosław Wichniarek, Wiesław Kuczko, Dorota Tomczak, Ariadna Nowicka, Monika Wojtyłko, Anna Froelich, Tomasz Osmałek
Adv. Sci. Technol. Res. J. 2023; 17(6):116-126
DOI: https://doi.org/10.12913/22998624/174079
 

Experimental-Numerical Analysis of a Flat Plate Subjected to Shearing and Manufactured by Incremental Techniques
Tomasz Kopecki, Łukasz Święch
Adv. Sci. Technol. Res. J. 2023; 17(4):179-188
DOI: https://doi.org/10.12913/22998624/169740
 

Parametric Prediction of FDM Process to Improve Tensile Properties Using Taguchi Method and Artificial Neural Network
Dina Ali, Abdullah F. Huayier, Abass Enzi
Adv. Sci. Technol. Res. J. 2023; 17(4):130-138
DOI: https://doi.org/10.12913/22998624/169572
 

The Impact of FDM Process Parameters on the Compression Strength of 3D Printed PLA Filaments for Dental Applications
Mostafa Adel Hamed, Tahseen Fadhil Abbas
Adv. Sci. Technol. Res. J. 2023; 17(4):121-129
DOI: https://doi.org/10.12913/22998624/169468
 

Risk Assessment of Individualized 3D Printed Prostheses Using Failure Mode and Effect Analysis
Filip Górski, Natalia Sahaj, Wiesław Kuczko, Adam Hamrol, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2022; 16(4):189-200
DOI: https://doi.org/10.12913/22998624/152735
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top