Scores:
10
MNiSW
92.2
ICV
 
 

Physical Analysis of Cross-Wedge Rolling Process of a Stepped Shaft

Łukasz Wójcik 1  ,  
 
1
Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland
Adv. Sci. Technol. Res. J. 2017; 11(4)
Publish date: 2017-12-05
KEYWORDS:
TOPICS:
ABSTRACT:
The paper presents experimental- model research results on the process of cross-wedge rolling of an axially-symmetrical element (stepped shaft). During research was used plastic mass on the basis of waxes in black and white colour. The aim of this experimental research was to determine the best option of forming in terms of values obtained and the course of forces. Physical examination was carried out using specialist machines, that is model and laboratory cross-wedge rolling mill. Experimental analysis was carried out using billets with the temperature of 15°C, whereas the actual process was carried out for billet from C45 carbon steel of temperature 1150°C. The study compared the dimensions of the components obtained during rolling tests and forming forces obtained in the result of physical modeling with forces obtained during real tests.
CORRESPONDING AUTHOR:
Łukasz Wójcik   
Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland