PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 14, 4, 2020
 
 

Impact of Accelerated Aging on the Performance Characteristics of "Green" Packaging Material of Polylactide
Krzysztof Moraczewski, Alona Pawłowska, Tomasz Karasiewicz, Piotr Rytlewski
Adv. Sci. Technol. Res. J. 2020; 14(4):1-10
DOI: https://doi.org/10.12913/22998624/127167
 

Selection of the Technological Ceramic Layer Thickness in an HPDC Machine Plunger in the Aspect of its Strength
Jacek Jankowski, Dariusz Kołakowski, Bogusław Pisarek
Adv. Sci. Technol. Res. J. 2020; 14(4):11-20
DOI: https://doi.org/10.12913/22998624/118399
 

Investigation of Harmful Chemical Compounds from Dual-Fuelled Diesel Engine
Ruslans Smigins, Tomasz Skrzek, Milena Górska, Grzegorz Pawlak
Adv. Sci. Technol. Res. J. 2020; 14(4):21-29
DOI: https://doi.org/10.12913/22998624/122464
 

Analysis of the Selection of Compensation Devices Determining the Reactive Power Balance of Wind Farms
Michalina Gryniewicz-Jaworska
Adv. Sci. Technol. Res. J. 2020; 14(4):30-36
DOI: https://doi.org/10.12913/22998624/122484
 

Temperature Measurement of Modern Cutting Tools During Turning
Karol Grochalski, Piotr Jabłoński, Rafał Talar, Paweł Twardowski, Michał Wieczorowski, Bartosz Jakubek, Wojciech Rukat
Adv. Sci. Technol. Res. J. 2020; 14(4):37-48
DOI: https://doi.org/10.12913/22998624/123007
 

Analysis of Impact of Gust Angle and Velocity on the Position of Stagnation Point
Michał Frant, Adam Kozakiewicz, Stanisław Kachel
Adv. Sci. Technol. Res. J. 2020; 14(4):49-57
DOI: https://doi.org/10.12913/22998624/123006
 

Gravitation Auger Water Separator from a Suspension of Wet Bulk Material
Leopold Hrabovský, Antonín Durna, Jiří Fries, Jiří Režnar
Adv. Sci. Technol. Res. J. 2020; 14(4):58-67
DOI: https://doi.org/10.12913/22998624/123284
 

Unrepeatability of the Fuel Injection and Combustion Processes in the Diesel Engine Fuelled with Renewable Fuel
Wincenty Lotko
Adv. Sci. Technol. Res. J. 2020; 14(4):68-77
DOI: https://doi.org/10.12913/22998624/123869
 

A New Method of Flanges Extrusion in Hollow Products – Analysis of the Limiting Phenomena
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2020; 14(4):78-85
DOI: https://doi.org/10.12913/22998624/125508
 

Methodological Procedures Applied to the Manufacturing Systems Design
Naqib Daneshjo
Adv. Sci. Technol. Res. J. 2020; 14(4):86-95
DOI: https://doi.org/10.12913/22998624/125579
 

Characteristics of Polymer Materials with New Smart Utilities
Karolina Głogowska, Tomasz Klepka, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2020; 14(4):96-103
DOI: https://doi.org/10.12913/22998624/125581
 

Wind Tunnel Research on the Unmanned Aerial Vehicle Rotor Blade Setting Angle
Ksenia Siadkowska
Adv. Sci. Technol. Res. J. 2020; 14(4):104-114
DOI: https://doi.org/10.12913/22998624/126047
 

The Study on the Damage of the Rear-Axle Shaft in a KIA Truck
Krzysztof Siczek, Marek Wozniak, Gustavo Ozuna
Adv. Sci. Technol. Res. J. 2020; 14(4):115-124
DOI: https://doi.org/10.12913/22998624/126508
 

The Use of Complex Networks Tools to Describe the Current State of Multidisciplinary Research in Poland
Izolda Gorgol
Adv. Sci. Technol. Res. J. 2020; 14(4):125-138
DOI: https://doi.org/10.12913/22998624/126970
 

The Effect of the Aging Process on Selected Properties of Polypropylene Modified by Natural Fillers
Bronisław Andrzej Samujło
Adv. Sci. Technol. Res. J. 2020; 14(4):139-147
DOI: https://doi.org/10.12913/22998624/126971
 

Application of the Markov Chain Theory in Estimating the Strength of Fiber-Layered Composite Structures with Regard to Manufacturing Aspects
Rafał Chatys
Adv. Sci. Technol. Res. J. 2020; 14(4):148-155
DOI: https://doi.org/10.12913/22998624/126972
 

Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Zuzana Gábrišová, Pavol Švec, Alena Brusilová
Adv. Sci. Technol. Res. J. 2020; 14(4):156-167
DOI: https://doi.org/10.12913/22998624/127355
 

Modelling of Dynamic Interactions in the Fuel Rail for the Aircraft Diesel Engine
Rafał Sochaczewski, Paweł Magryta
Adv. Sci. Technol. Res. J. 2020; 14(4):168-176
DOI: https://doi.org/10.12913/22998624/127168
 

On the Question of Methodology of Hybrid Sliding Bearings Estimated Load Capacity and Durability Evaluation
Myron Chernets, Mykhaylo Pashechko, Anatolii Kornienko, Juriy Chernets, Svetlana Fedorchuk
Adv. Sci. Technol. Res. J. 2020; 14(4):177-184
DOI: https://doi.org/10.12913/22998624/127169
 

Influence of the Size and Distribution of Load on the Damping Coefficient of Shock Absorbers in Passenger Vehicles
Jarosław Krzysztof Gonera
Adv. Sci. Technol. Res. J. 2020; 14(4):185-194
DOI: https://doi.org/10.12913/22998624/127356
 

Heuristic Adaptive Control of Waste Gas Exhausting in Coke Making
Ján Kačur, Patrik Flegner, Milan Durdán, Marek Laciak
Adv. Sci. Technol. Res. J. 2020; 14(4):195-212
DOI: https://doi.org/10.12913/22998624/128395
 

Simple Optical Coordinate Measuring System, Based on Fiducial Markers Detection, and its Accuracy Assessment
Piotr Gąska, Wiktor Harmatys, Maciej Gruza, Adam Gąska, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2020; 14(4):213-219
DOI: https://doi.org/10.12913/22998624/127082
 

Accuracy and Repeatability of Limb Scans Obtained on the Semi-Automatic Measuring Station
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Magdalena Żukowska
Adv. Sci. Technol. Res. J. 2020; 14(4):220-228
DOI: https://doi.org/10.12913/22998624/127011
 

Influence of the Length of Components From Polymer Composite on Selected Machinability Indicators in the Circumferential Milling Process
Krzysztof Ciecieląg
Adv. Sci. Technol. Res. J. 2020; 14(4):229-239
DOI: https://doi.org/10.12913/22998624/127010
 

Optimization of Welding Pliers Production for the Automotive Industry – Case Study
Nikoleta Husakova Mikušová, Soňa Badiarová, Karel Jeřábek
Adv. Sci. Technol. Res. J. 2020; 14(4):240-249
DOI: https://doi.org/10.12913/22998624/128105
 

Statistical Comparison of the Hardness and Scratch-Resistance of the PMMA Polymers Used in Orthodontic Appliances
Ivo Domagała, Leszek Gil, Marcel Firlej, Daniel Pieniak, Jarosław Selech, Dawid Romek, Barbara Biedziak
Adv. Sci. Technol. Res. J. 2020; 14(4):250-261
DOI: https://doi.org/10.12913/22998624/127437
 

Effectiveness of Diamond Blades in the Turning of Aluminium Composites
Paweł Karolczak, Marek Kołodziej, Maciej Kowalski
Adv. Sci. Technol. Res. J. 2020; 14(4):262-272
DOI: https://doi.org/10.12913/22998624/127436
 

Low Temperature Combustion of Jet Propellant-8 Fuel in Compression Ignition Engine with the Low Compression Ratio
Grzegorz Marek Pawlak, Patryk Płochocki, Tomasz Skrzek
Adv. Sci. Technol. Res. J. 2020; 14(4):273-283
DOI: https://doi.org/10.12913/22998624/127796
 

Model Research on the Influence of Bearing Preload Change on the Frequency and Form if Natural Vibrations of the Spindle System
Paweł Turek, Wacław Skoczyński
Adv. Sci. Technol. Res. J. 2020; 14(4):284-297
DOI: https://doi.org/10.12913/22998624/127991
 

Modern Reverse Engineering Methods Used to Modification of Jewelry
Arkadiusz Kroma, Oliwia Adamczak, Robert Sika, Filip Górski, Wiesław Kuczko, Krzysztof Grześkowiak
Adv. Sci. Technol. Res. J. 2020; 14(4):298-306
DOI: https://doi.org/10.12913/22998624/128006
 

Mechanical Properties and Sliding Wear Resistance of Suspension Plasma Sprayed YSZ Coatings
Leszek Łatka, Mirosław Szala, Wojciech Macek, Ricardo Branco
Adv. Sci. Technol. Res. J. 2020; 14(4):307-314
DOI: https://doi.org/10.12913/22998624/128574
 

Influence of the Biocidal Agent Layer on Selected Properties of the Blown Polyethylene Film
Łukasz Majewski, Mariusz Kłonica, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2020; 14(4):315-325
DOI: https://doi.org/10.12913/22998624/128848
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top