Experimental studies of a pneumatic drive system were carried out with the ap-plied element for the concurrent movement of two pneumatic drives. The main aim of these experiments was to obtain the results of specific measurements of displacements of two piston rods of pneumatic drives in relation to different values of loads in the whole range of the travel length. On the basis of these results, the speed of piston rods of two drives was determined. The results achieved during the experiment, showed the possibility of simultaneous insertion of two pneumatic drives with the use of an ele-ment for concurrent motion. This article is a continuation of the first article which was the study of the stroke speed of pneumatic cylinders with a synchronizing element.