EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE COMPRESSION OF A THIN-WALLED COMPOSITE PLATE
| 1 | Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland |
| 2 | Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstańców Warszawy 12, 35-959 Rzeszow, Poland |
| 3 | Faculty of Mechanical Engineering, Department of Applied Mechanics, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland |
CORRESPONDING AUTHOR
Publish date: 2016-09-01
Adv. Sci. Technol. Res. J. 2016; 10(31):177–184
KEYWORDS
TOPICS
ABSTRACT
The subject of research is a rectangular plate with a cut-out subjected to regular compression. The plate articulately supported on the short side edges, made of a composite with high strength properties. The study concerned the numerical finite element analysis linear and nonlinear stability of the structure and the experimental validation of the results. The instrument used was a numerical program ABAQUS®.
Related articles
