COMPARATIVE STUDY IN THE PASSIVE FORCE AND CUTTING TORQUE IN THE MILLING PROCESS OF POLYMER MATRIX COMPOSITES AND ALUMINUM ALLOYS
| 1 | Department of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland |
Publication date: 2013-06-10
Adv. Sci. Technol. Res. J. 2013; 7(18):6–12
KEYWORDS
ABSTRACT
This paper presents the results of a study undertaken to investigate the passive force and cutting torque during the milling of carbon fiber reinforced plastics saturated with epoxy resin and two aluminum alloys: AlSi21CuNi (AK 20) and 7075 (PA 9). The milling process was conducted using end mills with diamond inserts. The machining parameters were changed equally for each material as a result of which the passive force and cutting torque during the milling of these materials could be compared.
RELATED ARTICLE
