PL EN
 
PL EN
Current issue
About the Journal
Scientific Board
Editorial Office and Publisher
Article Processing Charge
Open Access

Author Anna Rudawska

 

Strength of Epoxy-Bonded Aluminium Alloy Joints After Sandblasting
Anna Rudawska, Magd Abdel Wahab, Miroslav Müller
Adv. Sci. Technol. Res. J. 2022; 16(2):262-279
DOI: https://doi.org/10.12913/22998624/147524
 

Influence of Adhesive Compound Viscosity on the Strength Properties of 1.0503 Steel Sheets Adhesive Joints
Izabela Miturska-Barańska, Anna Rudawska
Adv. Sci. Technol. Res. J. 2022; 16(2):196-205
DOI: https://doi.org/10.12913/22998624/147314
 

Effect of Surface Abrasive Treatment on the Strength of Galvanised Steel Sheet Adhesive Joints
Izabela Miturska-Barańska, Anna Rudawska
Adv. Sci. Technol. Res. J. 2022; 16(1):75-84
DOI: https://doi.org/10.12913/22998624/143471
 

The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
Elżbieta Doluk, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):107-115
DOI: https://doi.org/10.12913/22998624/116549
 

The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film
Anna Rudawska, Dana Stančeková, Mirosław Müller, Tatiana Vitenko, Vlodymyr Iasnii
Adv. Sci. Technol. Res. J. 2020; 14(1):58-68
DOI: https://doi.org/10.12913/22998624/113612
 

The Substantiation of the Optimal Parameters for Dough Pinning-Out Rollers
Tetiana Vitenko, Igor Stadnik, Paweł Droździel, Anna Rudawska
Adv. Sci. Technol. Res. J. 2020; 14(1):32-41
DOI: https://doi.org/10.12913/22998624/113611
 

Strength of Assembly Butt Joints of Plastic Pipes
Izabela Miturska, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):10-17
DOI: https://doi.org/10.12913/22998624/113544
 

Solutions of the Roller Conveyor in Terms of Logistics Provider
Lucia Madleňáková, Mária Matúšková, Radovan Madleňák, Anna Rudawska, Iwona Rybicka
Adv. Sci. Technol. Res. J. 2018; 12(4):1-9
DOI: https://doi.org/10.12913/22998624/92098
 

USING HYDRODYNAMIC CAVITATION DEVICE IN THE INDUSTRY
Tatiana Vitenko, Paweł Droździel, Anna Rudawska
Adv. Sci. Technol. Res. J. 2018; 12(3):158-167
DOI: https://doi.org/10.12913/22998624/94944
 

THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS
Anna Rudawska, Marek Maziarz, Michał Šajgalík, Petr Valášek, Tomas Zlamal, Volodymyr Iasnii
Adv. Sci. Technol. Res. J. 2018; 12(3):47-54
DOI: https://doi.org/10.12913/22998624/92099
 

A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL
Dana Stančeková, Anna Rudawska, Albert Kulla, Jana Petrů, Jozef Holubják
Adv. Sci. Technol. Res. J. 2018; 12(3):106-113
DOI: https://doi.org/10.12913/22998624/92095
 

MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES
Anna Rudawska, Mateusz Malczarski, Dana Stančeková, Magd Abdel Wahab, Vladimira Schindlerová
Adv. Sci. Technol. Res. J. 2018; 12(2):112-120
DOI: https://doi.org/10.12913/22998624/91891
 

Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Izabela Miturska, Anna Rudawska, Paweł Niedziałkowski, Jakub Szabelski, Dominik Grzesiczak
Adv. Sci. Technol. Res. J. 2018; 12(1):135-141
DOI: https://doi.org/10.12913/22998624/86258
 

Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Izabela Miturska, Anna Rudawska, Piotr Pawlak, Dana Stančeková, Mateusz Chyra
Adv. Sci. Technol. Res. J. 2017; 11(4):97-102
DOI: https://doi.org/10.12913/22998624/78165
 

The Properties of Regenerative Polymer Mass
Anna Rudawska, Albert Wierzchowski, Miroslav Müller, Jana Petrů, Nataša Náprstková
Adv. Sci. Technol. Res. J. 2017; 11(3):130-138
DOI: https://doi.org/10.12913/22998624/71149
 

THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS
Anna Rudawska, Katarzyna Głogowska, Tetiana Vitenko, Dana Stančeková, Nadežda Čuboňová, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2017; 11(2):8-16
DOI: https://doi.org/10.12913/22998624/67377
 

THE EFFECT OF DEGREASING ON ADHESIVE JOINT STRENGTH
Anna Rudawska, Justyna Nalepa, Miroslav Müller
Adv. Sci. Technol. Res. J. 2017; 11(1):75-81
DOI: https://doi.org/10.12913/22998624/66500
 

IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625
Jiří Hajnyš, Tomáš Zlámal, Jana Petrů, Marek Pagáč, Anna Rudawska
Adv. Sci. Technol. Res. J. 2016; 10(32):24-31
DOI: https://doi.org/10.12913/22998624/65111
 

THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Anna Rudawska, Dana Stančeková, Józef Brzęczek
Adv. Sci. Technol. Res. J. 2016; 10(31):109-118
DOI: https://doi.org/10.12913/22998624/64066
 

TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS
Anna Rudawska, Nadežda Čuboňova, Kamila Pomarańska, Dana Stančeková Stančeková, Arkadiusz Gola
Adv. Sci. Technol. Res. J. 2016; 10(30):182-192
DOI: https://doi.org/10.12913/22998624/62513
 

INFLUENCE OF THE THICKNESS OF JOINED ELEMENTS ON LAP LENGTH OF ALUMINIUM ALLOY SHEET BONDED JOINTS
Anna Rudawska
Adv. Sci. Technol. Res. J. 2015; 9(27):35-44
DOI: https://doi.org/10.12913/22998624/59082
 

PRESSURE DURING CURING AND THE STRENGTH OF 2024, 2017A AND 1050 ALUMINIUM ALLOY SHEET ADHESIVE JOINTS
Anna Rudawska
Adv. Sci. Technol. Res. J. 2015; 9(26):96-103
DOI: https://doi.org/10.12913/22998624/2371
 

TECHNICAL AND ORGANISATIONAL ASPECTS OF PRODUCTION PREPARATION ON THE EXAMPLE OF DOOR FACTORY
Anna Rudawska, Agnieszka Seń, Leszek Semotiuk
Adv. Sci. Technol. Res. J. 2013; 7(20):42-46
DOI: https://doi.org/10.5604/20804075.1073055
 

Strength Parameters of Corrugated Cardboard and Corrugated Cardboard Joints
Anna Rudawska, Piotr Penkala, Daniel Gąska, Kacper Sawosz, Dana Stančeková
Adv. Sci. Technol. Res. J. 2024; 18(8):333-340
DOI: https://doi.org/10.12913/22998624/192971
 

The Influence of Gradation and Type of Abrasive Material on Strength of Adhesive Joints of Steel Sheets
Anna Rudawska, Piotr Penkała, Zuzanna Kozicka, Karolina Kowalska, Miroslava Ťavodová
Adv. Sci. Technol. Res. J. 2024; 18(6):341-350
DOI: https://doi.org/10.12913/22998624/192019
 

Effect of Machining Settings and Tool Geometry on Surface Quality After Machining of Al/CFRP Sandwich Structures
Elżbieta Doluk, Anna Rudawska
Adv. Sci. Technol. Res. J. 2022; 16(3):22-33
DOI: https://doi.org/10.12913/22998624/147787
 
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top