SYNCHRONIZATION OF DATA RECORDED USING ACQUISITION STATIONS WITH DATA FROM CAMERA DURING THE BUBBLE DEPARTURE
Paweł Dzienis 1  
,   Romuald Mosdorf 1  
 
More details
Hide details
1
Department of Mechanics and Applied Informatics, Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45c, 15-351 Bialystok, Poland
Publication date: 2013-12-06
 
Adv. Sci. Technol. Res. J. 2013; 7(20):29–34
 
KEYWORDS
ABSTRACT
In this study the first part of the experimental data was recorded in a data acquisition station, and another one was recorded with a high speed camera. The data recorded using the acquisition station was recorded with higher frequency than the time between two subsequent frames of the film. During the analysis of the experimental data the problem was related to the synchronization of measurement from acquisition station and data recorded with a camera. In this paper the method of synchronization of experimental data has been shown. A laser- phototransistor system has been used. The data synchronization was required in scaling of sampling frequency in the investigated time series.